Bently Nevada
Minden, NV 89423
Share:
Vibration Data Collector is intrinsically safe.
Palm-sized Snapshot(TM) weighs 1.5 lb and is suitable for gathering condition monitoring data as part of Predictive Maintenance program. Instrument can be used in hazardous areas up to and including Zone 0 and Division 1. It collects full waveforms and spectral content for oscilloscope-like and spectrum analyzer capabilities. Single-channel instrument accepts 2 simultaneous input signals, one for...
Read More »
Sensor Network provides online condition monitoring.
TrendmasterÃ-® Pro condition monitoring system links thousands of condition assessment sensors together via wired and wireless networks. Utilizing sensor-bus network and data acquisition modules, system delivers quasi-continuous monitoring, scanning each point several times per hour. Compatible with System 1(TM) Plant Asset Management software, system supports vibration, temperature, seal...
Read More »Software integrates with MAXIMO-® software.
System 1(TM) Plant Asset Management v4.0 features integrated interface to MAXIMOÃ-® from MRO(TM) Software. It provides condition monitoring, document linking, Decision Support, and other mechanical and thermodynamic condition assessment tools. MAXIMO provides asset-related maintenance management, procurement and sourcing functionality vital to equipment lifecycle management. Bi-directional...
Read More »Transducer System addresses DE measurement.
Suited for use with medium- and large-sized steam turbines used in power generation service, transducer system utilizes 25 mm proximity probe, extension cable, and ProximitorÃ-® sensor. Probe, available in various case styles and thread sizes, replaces existing 25 mm and 35 mm installations. System is compatible with existing Bently Nevada monitoring systems, using same power requirements and...
Read More »
Seal-Leak Detector prevents fires and toxic emissions.
Through online monitoring and trending of critical seals, Seal-Leak Detection (SLD) system detects failures on process pumps in refineries and chemical plants. It directly measures pressure across seal's face, allowing operators to detect pressure changes indicative of failing seals. SLD system is part of TrendmasterÃ-® PRO distributed condition monitoring system, which provides real-time...
Read More »Balancing Software is available for portable data collector.
Used for balancing non-critical, balance-of-plant machinery running under single operating condition, Snapshot(TM) Balance allows users to correct unbalance problems in general-purpose machinery. Calculations are performed using derived and manually entered influence vectors and can be configured for 1 or 2-plane balancing. Software includes Balance Wizard, vector calculator, and printable...
Read More »Software uses Pocket PCs for routine data logging.
Snapshot(TM) Clipboard software allows plant personnel and maintenance engineers to log meter and gauge readings, make inspections, and record free-hand notes. Data collected manually from predetermined routes is transferred into System 1(TM) Plant Asset Management software, which provides permanent storage of all collected data and system configuration functions. Built-in alarm notification...
Read More »
Software and Interface support reciprocating compressors.
Model 3500/22M Transient Data Interface (TDI) includes capabilities for capturing reciprocating compressor data and analyzing it in System 1(TM) software. TDI's alarm capture capabilities provide waveform information before, during, and after events, making diagnosis of transient events possible. System 1 v3.0 includes support for rod position / rod drop measurement technology. Custom rules for...
Read More »Software facilitates plant asset management.
System 1(TM) Release 3.0 is a modular and scalable condition monitoring software platform. It provides single integrated tool for storing, accessing, and managing plant production assets with information, rather than simply data. Decision Support functionality extends ability to address any asset type, such as machines, boilers, transformers, piping, instruments, and valves.
Read More »
Computer Platform includes monitors and data acquisition.
Series 3500 platform provides all data-capture functions needed for interfacing machinery protection system to condition monitoring software. Functionality is provided by 3500/22M TDI Rack Interface Module, which allows users to connect system to System 1(TM) software with one Ethernet cable. MÃ-² Monitor modules capture high speed waveform information and supply this to System 1 software via...
Read More »
Vibration Data Collector is intrinsically safe.
Palm-sized Snapshot(TM) weighs 1.5 lb and is suitable for gathering condition monitoring data as part of Predictive Maintenance program. Instrument can be used in hazardous areas up to and including Zone 0 and Division 1. It collects full waveforms and spectral content for oscilloscope-like and spectrum analyzer capabilities. Single-channel instrument accepts 2 simultaneous input signals, one for...
Read More »
Sensor Network provides online condition monitoring.
TrendmasterÃ-® Pro condition monitoring system links thousands of condition assessment sensors together via wired and wireless networks. Utilizing sensor-bus network and data acquisition modules, system delivers quasi-continuous monitoring, scanning each point several times per hour. Compatible with System 1(TM) Plant Asset Management software, system supports vibration, temperature, seal...
Read More »Software integrates with MAXIMO-® software.
System 1(TM) Plant Asset Management v4.0 features integrated interface to MAXIMOÃ-® from MRO(TM) Software. It provides condition monitoring, document linking, Decision Support, and other mechanical and thermodynamic condition assessment tools. MAXIMO provides asset-related maintenance management, procurement and sourcing functionality vital to equipment lifecycle management. Bi-directional...
Read More »Transducer System addresses DE measurement.
Suited for use with medium- and large-sized steam turbines used in power generation service, transducer system utilizes 25 mm proximity probe, extension cable, and ProximitorÃ-® sensor. Probe, available in various case styles and thread sizes, replaces existing 25 mm and 35 mm installations. System is compatible with existing Bently Nevada monitoring systems, using same power requirements and...
Read More »
Seal-Leak Detector prevents fires and toxic emissions.
Through online monitoring and trending of critical seals, Seal-Leak Detection (SLD) system detects failures on process pumps in refineries and chemical plants. It directly measures pressure across seal's face, allowing operators to detect pressure changes indicative of failing seals. SLD system is part of TrendmasterÃ-® PRO distributed condition monitoring system, which provides real-time...
Read More »Balancing Software is available for portable data collector.
Used for balancing non-critical, balance-of-plant machinery running under single operating condition, Snapshot(TM) Balance allows users to correct unbalance problems in general-purpose machinery. Calculations are performed using derived and manually entered influence vectors and can be configured for 1 or 2-plane balancing. Software includes Balance Wizard, vector calculator, and printable...
Read More »Software uses Pocket PCs for routine data logging.
Snapshot(TM) Clipboard software allows plant personnel and maintenance engineers to log meter and gauge readings, make inspections, and record free-hand notes. Data collected manually from predetermined routes is transferred into System 1(TM) Plant Asset Management software, which provides permanent storage of all collected data and system configuration functions. Built-in alarm notification...
Read More »Software facilitates plant asset management.
System 1(TM) Release 3.0 is a modular and scalable condition monitoring software platform. It provides single integrated tool for storing, accessing, and managing plant production assets with information, rather than simply data. Decision Support functionality extends ability to address any asset type, such as machines, boilers, transformers, piping, instruments, and valves.
Read More »
Software and Interface support reciprocating compressors.
Model 3500/22M Transient Data Interface (TDI) includes capabilities for capturing reciprocating compressor data and analyzing it in System 1(TM) software. TDI's alarm capture capabilities provide waveform information before, during, and after events, making diagnosis of transient events possible. System 1 v3.0 includes support for rod position / rod drop measurement technology. Custom rules for...
Read More »
Computer Platform includes monitors and data acquisition.
Series 3500 platform provides all data-capture functions needed for interfacing machinery protection system to condition monitoring software. Functionality is provided by 3500/22M TDI Rack Interface Module, which allows users to connect system to System 1(TM) software with one Ethernet cable. MÃ-² Monitor modules capture high speed waveform information and supply this to System 1 software via...
Read More »