White Drive Products
Hopkinsville, KY 42241
Share:
Compact SAPR Brakes are suited for mobile applications.
Directly coupled to output shaft, SB brake uses spring-applied/pressure-release, wet multiple-disc technology to provide fail-safe brake capability. Wear components are immersed in fluid and environmentally sealed to prevent contamination and corrosion. Constructed with cast iron housing, case hardened steel shaft, and cylindrical bearing, product has max static load-holding capacity of 5,500...
Read More »
Hydraulic Motor handles harsh operation conditions.
Suited for construction and agricultural machinery, low-speed/high-torque Model D9 uses dual tapered roller bearings and double-lipped TeflonÃ-® shaft seals. Eight lobe and 9 pocket Roller StatorÃ-® facilitates smooth motor operation, while eliminating need for gearbox in many applications. Available in 9 displacements from 15.6-62.7 inÃ-³/rev, motor offers continuous operating speeds...
Read More »
Sensor Tester checks hydraulic motor speed sensors.
Designed to facilitate troubleshooting and testing of hydraulic motor speed sensors and pulse detection systems, Sensor Tester lets user know if any part of speed control system is malfunctioning. LED light, audible signal, and flashing pulse button confirm proper operation of sensor/system, while cable LED ensures cable is connected properly and that power is being supplied. LED also indicates...
Read More »
Release Pump is suited for mobile equipment brakes.
Usable with any spring applied/hydraulically released braking mechanism, product provides one-piece alternative to assembling components used for brake release. Aluminum body has two 3/8 in.-16 UNC threaded through holes, and is rated for pressures to 4,000 psi. Available with No. 4 SAE ports or -4 JIC fittings, unit includes size- and color-coded valve rod and pump rod. Product delivers output...
Read More »
Hydraulic Pumps suit commercial lawnmowers.
Series TDS uses variable displacement, axial piston design and offers 3 displacement sizes of 10, 13, and 18 cc/rev. Rated for input speeds from 600-3,600 rpm, pumps provide flows up to 17.1 gpm. They have die-cast aluminum housing, steel wear plate with bronze overlay, steel swash plate, steel pistons, and bronze bushing. Inlet and outlet ports are SAE-8, and suction port is SAE-6. Units are...
Read More »
Compact SAPR Brakes are suited for mobile applications.
Directly coupled to output shaft, SB brake uses spring-applied/pressure-release, wet multiple-disc technology to provide fail-safe brake capability. Wear components are immersed in fluid and environmentally sealed to prevent contamination and corrosion. Constructed with cast iron housing, case hardened steel shaft, and cylindrical bearing, product has max static load-holding capacity of 5,500...
Read More »
Hydraulic Motor handles harsh operation conditions.
Suited for construction and agricultural machinery, low-speed/high-torque Model D9 uses dual tapered roller bearings and double-lipped TeflonÃ-® shaft seals. Eight lobe and 9 pocket Roller StatorÃ-® facilitates smooth motor operation, while eliminating need for gearbox in many applications. Available in 9 displacements from 15.6-62.7 inÃ-³/rev, motor offers continuous operating speeds...
Read More »
Sensor Tester checks hydraulic motor speed sensors.
Designed to facilitate troubleshooting and testing of hydraulic motor speed sensors and pulse detection systems, Sensor Tester lets user know if any part of speed control system is malfunctioning. LED light, audible signal, and flashing pulse button confirm proper operation of sensor/system, while cable LED ensures cable is connected properly and that power is being supplied. LED also indicates...
Read More »
Release Pump is suited for mobile equipment brakes.
Usable with any spring applied/hydraulically released braking mechanism, product provides one-piece alternative to assembling components used for brake release. Aluminum body has two 3/8 in.-16 UNC threaded through holes, and is rated for pressures to 4,000 psi. Available with No. 4 SAE ports or -4 JIC fittings, unit includes size- and color-coded valve rod and pump rod. Product delivers output...
Read More »
Hydraulic Pumps suit commercial lawnmowers.
Series TDS uses variable displacement, axial piston design and offers 3 displacement sizes of 10, 13, and 18 cc/rev. Rated for input speeds from 600-3,600 rpm, pumps provide flows up to 17.1 gpm. They have die-cast aluminum housing, steel wear plate with bronze overlay, steel swash plate, steel pistons, and bronze bushing. Inlet and outlet ports are SAE-8, and suction port is SAE-6. Units are...
Read More »