Company News

WAGO Corp.

N120 W19129 Freistadt Rd., Germantown, WI, 53022, US

  • 262-255-6222
  • 800-346-7245

General Information:
Charlie Norz
Product Manager
USA
Phone: 800-346-7245
E-mail this person

Share Like Tweet Add Email

Latest New Product News from
WAGO Corp.

Sensors, Monitors & Transducers, Test & Measuring Instruments

PTC Thermistor Modules offer high sensor density.

January 29, 2015

Featuring 8 channels, Model 750-1425 is suitable for connecting to motor thermal monitoring PTC thermistors per DIN 44081/44082 standards. Up to 6 PTC thermistors can be connected in series per channel minimizing system footprint. Providing overload protection of motors within I/O node, PTC Digital Input Module features onboard diagnostics for short circuit, wire break, and out-of-measurement range as well as red/green LEDs that indicate over-temperature and wiring errors. Read More

Test & Measuring Instruments

RTD Analog Input Modules accurately read sensor data.

January 27, 2015

Connecting directly to Pt and Ni resistance sensors, 4-channel Model 750-450 and 8-channel Model 750-451 are suited for wide range of temperature data collection tasks. Modules are configurable for multiple sensor types or potentiometers, and include red status LED that indicates sensor errors such as short circuit, wire break, or out-of measurement range. Featuring compact 12 mm profile, modules are available with 2-, 3-, or 4-wire connection technology. Read More

Electronic Components & Devices

Spring Terminal Block suits conductors up to 350 kcmil.

October 7, 2014

Featuring lock-open function for hands-free wire manipulation and push-in jumper for commoning, Model 285-1185 provides vibration proof, thermal resistant, gas tight connections. Spring pressure terminal block can terminate large conductors ranging from 1/0 to 350 kcmil. UL and CSA certified for up to 310 A at 1,000 V, device is suitable for energy-intensive applications in industrial power control and distribution, shipping, rail transport, wastewater, and petrochemical industries. Read More

Computer Hardware & Peripherals, Controls & Controllers, Green & Clean

Fieldbus Gateway enables device communications switching.

September 22, 2014

Used for PLC programming and process visualization, PFC200 acts as fieldbus gateway to switch field devices between MODBUS TCP/UD/RTU, CAN, PROFIBUS, Smart Grid, and Serial RS-232/RS-485. System uses 600 MHz ARM Cortex A8 processor that offers high-speed processing and support of 64 bit-variables. Other features include 256 MB memory; compatibility with NTP, SNMP, HTTPS, and FTPS protocols; and 2 switched Ethernet ports. Read More

Electrical Equipment & Systems, Electronic Components & Devices

SMT PCB Terminal Blocks target small LED modules.

June 5, 2014

With height of 2.7 mm, 2059 Series minimizes on-board LED shadowing and offers alternative to soldering leads. Units feature PUSHWIRE® connection of solid or pre-bonded conductors, with tool-operated release slot, enabling maintenance-free connection between drivers and LED modules. Available in 1-, 2-, and 3-pole configurations, series accommodates conductors 26-22 AWG with pin spacing of 3 mm. One-pole variant is rated for 3 A/600 V, while 2- and 3-pole models are rated for 3 A/250 V. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals

High-Density I/O System withstands extreme environments.

May 13, 2014

Operating from -40 to +70°C, WAGO-I/O-SYSTEM 750 XTR withstands high humidity environments as well as short-term condensation according to IEC EN60721-3-3 while also offering 5 g vibration resistance and 25 g shock resistance per IEC 60068-2-27, isolation up to 5 kV impulse voltage, and protection against EMC interference. Product can be used as distributed I/O system connected to higher level controller via MODBUS TCP, EtherNet I/P, CANopen, or PROFIBUS or as standalone system. Read More

Electronic Components & Devices

SMD PCB Terminal Block features pushbutton operation.

April 16, 2014

Accommodating broad range of conductors, 2061 Series SMD PCB Terminal Block with Pushbuttons has CAGE CLAMP®S connection technology which allows for PUSHWIRE® connection of solid or pre-bonded conductors or stranded, unprepared conductors via pushbutton operation. Measuring 5.6 mm in height, product features 6 mm pin spacing with 10 A current rating and up to 16 AWG, as well as rated voltage of up to 600 V. Series is available as 1-, 2-, and 3-pole variants. Read More

Software

Web Visualization App grants mobile access to operations data.

March 31, 2014

Available for iOS and Android, WAGO-WebVisu-App operates exclusively with WAGO programmable controllers and enables user to monitor and control operations directly from smartphone/tablet. Mobile operators gain access to equipment status, process data, and production levels, and up to 100 controllers can be defined for direct access via URL. Visualization screens are built within WAGO-I/O-PRO, same software used for programming, to provide all-in-one solution. Read More

Other Company News from
WAGO Corp.

October 27, 2009

Compact WAGO IP 200 Plotter