WAGO Corp.

Germantown, WI 53022

I/O Modules feature pluggable connectors.
Offered as analog, digital, and special function modules, 753 Series facilitates installation and minimizes wiring errors. Pluggable I/O modules, along with corresponding connector, have overall dimensions of 12 x 64 x 100 mm. Orange pull tabs enable tool-less removal of connector or I/O module, and built-in test points are located at every connection point. Along with integrated strain-relief,...
Read More »
Splicing Connector offers alternative to twist/crimp styles.
Five-conductor Model 222-415 features CAGE CLAMP-® spring pressure connection technology, which provides vibration-proof, corrosion/temperature cycling resistant wire connection. Integrated orange lever actuator allows for tool-less wiring and ensures proper connection, while built-in strip length gauge insures proper 9-10 mm strip length. Connector is UL listed for 600 V/20 A and can terminate...
Read More »
Control Cabinet I/O Extensions are rated to UL 94 V-0.
Sensor/actuator junction boxes in 757 Series safely extend control cabinet functions into field as well as locally on machine or process. Available with 4, 6, or 8 ports per box and 4 or 5 poles per port, IP 67/68 rated series features LED indication for power and signal status as well as connection point marking tags/holders. Master cable can be configured via M23 connector or pre-installed, and...
Read More »
Push Wire Connector is designed for AWG No. 10.
WALL-NUTS(TM) 773-173 AWG No. 10, 3-conductor, push wire connector provides safe, flexible alternative to twist wire connectors for electrical contractors. It does not require twisting or taping, and transparent housing allows for visual confirmation of connection. Touch-proof and rated to 105-
Read More »I/O Modules ensure reliability in harsh environments.
I/O System 755, IP 67 modules feature fully molded housing, making them suitable for use in environments where water and oil can regularly come in contact with modules and their connections. They are available for DeviceNet, Profibus, and Interbus-S. Sensors and actuators can be directly connected via M12 standard connectors. Various input and output configurations are available from 16-I/8-O to...
Read More »
PCB Terminal Strips handle high currents.
Compact 745 Series have current rating of 50 A, are available with pin spacings of 15 and 20 mm, and accommodate wire from #24 to #6 AWG. Four solder pins ensure terminal strips fit securely and guarantee safe and efficient current distribution. Jumpers can be used to loop through potentials or connect current circuits in parallel. Separate test slots can be accessed, even with wires connected.
Read More »
DIN-Rail Power Supply offers 85% efficiency.
Part No. 787-912 2 Amp/24 Vdc switch-mode power supply provides output power of 48 W and universal input voltage of 85 to 264 Vac. Output is electronically protected against short circuits and is equipped with automatic restart. Unit has been tested and approved to UL 1950, CAN/CSA C 22.2 No. 950-95 and IEC/EN 60 950, and meets EMI suppression requirements of EN 50 022 class B. Ambient...
Read More »
Terminal Strip uses spring pressure termination.
Cage Clamp Compact Series 742 PCB terminal block offers choice of either knife disconnect or automotive mini-fuse. It is available with one, two, or three conductors, has pin spacing of 5 mm, and handles wire range of 12 to 28 AWG. Series 742 also offers jumpering capabilities and use of test plugs.
Read More »
Terminal Blocks offer space savings with 1.08 in. profiles.
CAGE CLAMP COMPACT 870 Series DIN rail mount terminal blocks measure 1.08 in. from top of rail. They connect 28-12 AWG, and carry current ratings of 20/5 amps at 300/600 V. Suitable for use in electrical appliances and terminal boxes, CAGE CLAMP COMPACT 870 Series terminal blocks are available in feed-through and ground blocks, multi-level blocks, EExi, diode, LED, and surge suppression block...
Read More »
Terminal Blocks suit electric, closed housing applications.
Series 826 ground conductor terminal blocks ensure automatic and reliable contact to metal enclosure walls. Multi-pole, feedthrough terminal blocks are made from modular, factory-assembled, individual terminals with solid, single-part housing, which is protected against accidental contact. Series 826 blocks connect 28 to 12 AWG, and are rated at 32 A with rated voltage of 500 V.
Read More »