Company News

Creform Corp.

P.O. Box 830, Greer, SC, 29652, US

  • 800-839-8823
Share Like Tweet Add Email

Latest New Product News from
Creform Corp.

Material Handling & Storage, Transportation Industry Products

Saddle Cart provides flexible part handling for manufacturers.

January 14, 2016

Built from Creform material handling system, saddle cart handles irregular and contoured parts. Upper level holds top of part, while lower level holds corresponding bottom of part. Surface width is sized so parts can be spread out to avoid tangling and improve picking efficiency. Able to be engineered to application requirements, cart holds up to 300 lb and is supported by four 6 in. dia casters (2 swivel). Open design makes all levels visible and promotes safety during movement. Read More

Material Handling & Storage, Mounting & Attaching Products

Gravity Rollers and Mounts feature low-profile design.

December 7, 2015

With rail base measuring 32 mm to top of roller, Low Profile Placon® Series helps minimize vertical space needed for conveyors. Standard system incorporates 18 mm diameter rollers with 19 mm diameter center to center, and can be configured up to 3 m long. Available in black plastic or stainless covered versions, rollers are suitable for both standard and ESD applications. Plated steel mounts for 28 mm pipe and joint come in basic model and model with built-in drop stop. Read More

Material Handling & Storage

Mobile Tool Carts provide temporary work surface.

February 25, 2015

Built with Creform System of pipe and joints, Mobile Tool Carts are available with capacities ranging from 300–1,000 lb, all promoting visual tool inventory management. Carts feature metal pegboard vertical backdrop that uses pins, pegs, and hooks for flexible tool storage. In addition to ½ in. thick plastic horizontal upper work surface, carts have ½ in. plastic height-adjustable shelf located on bottom that is recessed to keep items from falling off and four 4 in. rubber wheel casters. Read More

Material Handling & Storage

Mobile Flow Rack features wide spans and 1,000 lb capacity.

January 9, 2015

Constructed with 42 mm pipe and component system that negates need for additional bracing, mobile flow rack provides 5 supply levels. Each has 5 repositionable flow lanes with standard and flanged skatewheel conveyors. While flanged skatewheel conveyors handle small bins, standard skatewheel conveyors handle larger totes and boxes. Measuring 56 x 44 x 65 in., ergonomic rack has 4 in. swivel casters for movement and locking brakes for secure positioning. Read More

Material Handling & Storage

Ergonomic Picking Cart can be used in narrow aisle warehouses.

October 6, 2014

Occupying 31 x 86 in. footprint and able to hold up to 600 lb, narrow picking cart is suited for order picking or kitting operations in warehouses or component storage areas. Angled shelves are canted to promote content visibility, ergo-vertical C-shaped handles with cross bars on either end facilitate pushing, and automatic hand positioning accommodates operators of different heights. While two fixed center wheels allow for pivoting, 4 corner swivel casters to help support loads. Read More

Plant Furnishings & Accessories

Modular Workstation combines multiple assembly operations.

July 22, 2014

Eliminating unnecessary steps for assemblers, mobile workstation combines multiple assembly operations into single units. Construction, consisting of Creform plastic coated steel pipe and metal joints, facilitates customization and modification. With 700 lb capacity and average dimensions of 83 x 48 x 61 in., workstation features plastic work surface; skatewheel conveyors; 2-level, L-shaped slide pipe flow rack; 2 return levels; computer monitor; florescent light; and tool balancer. Read More

Material Handling & Storage

Heavy-Duty Flow Racks combine rugged design and flexibility.

June 17, 2014

Constructed using 42 mm pipe and joint system, heavy-duty flow rack supports 1,200 lb of boxes and totes. Racks are 72 in. wide, 40 in. deep, and 60 in. tall and meet all flow lanes restrictions within ergonomic zone. While top and bottom levels each have 5 flow lanes, middle level has 4. Flow lane widths can be modified to match box or tote widths as needed. Flow lanes feature low-friction, heavy-duty skatewheel conveyors that allow shallow flow lane angles. Read More

Material Handling & Storage

Automated Guided Vehicle operates in space-restricted areas.

April 25, 2014

Measuring 34 x 18 x 37 in., AGV consists of cart built with pipe and joints and bolt-on 12 V drive unit, which uses 1 deep cycle AGM battery that will operate for one 8-hour shift. Single direction vehicle follows peel and stick magnetic tape guidepath, and also responds to commands from magnetic tape strips placed on floor perpendicular to guidepath, eliminating need for programming. With minimum turning radius of 12 in. at slow speed, AGV is suited for light-duty applications in tight spaces. Read More

Architectural and Civil Engineering Products

Communication Center Kiosk offers modularity and durability.

December 10, 2013

Mobile, 4-sided, rotating information kiosk, able to be customized to meet specific needs and then modified, is built to withstand plant floor environments while offering aesthetics that complement office decor. Construction is based on plastic-coated steel pipe and metal joints, and 32 in. high x 14 in. wide panels can be modified to different sizes, swapped out, or hinged. Base is supported by 4 swivel, locking casters for mobility or feet for stationary structure. Read More

Material Handling & Storage, Plant Furnishings & Accessories

Creform Kanban Stations create simple production system.

July 23, 2013

Responsive to change, modular stations use Creform® System of plastic-coated steel pipe and joint components along with Creform Kanban plastic dividers and spacers that provide compartmental storage for cards. Dividers/spacers, which measure 6 ¼ x 5/8 x 4 in., interlock with each other without adhesive and can be oriented vertically or horizontally. Spacers create wider slot openings, and slot caps provide labeling surface or can be used to block off positions. Read More

Plant Furnishings & Accessories

Portable Heavy-Duty Workstation fits through commercial doors.

June 20, 2013

Used for temporary maintenance or assembly jobs, 34 x 30 x 82 in. workstation has base constructed with Creform 42 mm dia pipe and joints. Load capacity is 650 lb without bracing, and 4 in. stem casters enable mobility. Work surface has ½ in. plastic top, and flow level below pull out drawer presents parts, boxes, or totes from back of unit to operator. Upper structure's main support is 42 mm pipe integrated with 28 mm pipe and 42/28 mm joints, allowing mounting of Creform accessories. Read More

Material Handling & Storage

Drawbridge Shelf Cart uses gas struts.

May 10, 2013

Utilizing gas struts for tilt-up feature, Drawbridge Shelf Cart is suited for protecting and delivering totes, containers, or unpackaged parts from warehouse to sequential operations in production. Struts control speed of raising/lowering by counterbalancing weight of each tilt-away shelf. Cart has 34 x 70 in. footprint and holds up to 600 lb, but can be built to other sizes. Four 4 in. diameter urethane casters, 2 fixed and 2 with brakes, provide for stable rolling and secure positioning. Read More

Material Handling & Storage

Programmable AGV carries up to 900 lb of cargo.

April 26, 2013

Featuring smooth, flat bed steel top that can hold two 3 x 3 ft pallets of materials, boxes, totes, and unpackaged parts, AGV has max speed of 164 fpm and base with custom-designed, fabricated steel frame. Bidirectional feature lets each end independently follow magnetic tape guidepath, eliminating need for return guidepath in system. Programmed via PC or onboard HMI touchscreen, AGV utilizes PLC that stores up to 50 courses with up to 128 commands each. Read More


AGV Tugger runs full 8-hour shift without recharging.

February 6, 2013

Driving under stationary cart, properly positioned on magnetic tape guidepath, heavy-duty Model BST (undercarriage) AGV extends tow pin into cart's receiver catch and moves it to programmed destination. It then retracts tow pin, leaving cart for intended purpose and moves on to service another cart. Unit features load capacity of 2,000 lb, drawbar of 130 lb, and adjustable control of up to 7 speeds. For safety, AGV has obstacle sensor with 7 sensing areas and 2 outputs, temporary slow and stop. Read More

Material Handling & Storage

Housekeeping Cart supports 5-S programs.

December 28, 2012

Constructed using Creform® System of plastic-coated steel pipe, joints, and hardware accessories, Housekeeping Cart stores and transports brooms, dust pans, mops, buckets, and hand brushes, as well as trash containers. Top and bottom pans, measuring 24 x 24 in., have 3 in. lip to contain spills and leaks. If needed, portable clean-up station can be expanded to house vacuums and power scrubbers. Color-coding by type or department is made possible by wide selection of pipe colors. Read More

Plant Furnishings & Accessories

Heavy-Duty Workstation offers powered height adjustment.

June 20, 2012

With 42 mm steel pipe and joints forming base, Heavy-Duty Workstation uses only 2 angle braces for rigidity. System has 1 in. thick plastic work surface rated at 750 lb and measuring 42 x 36 x 30-42 in. Each leg features internally mounted hydraulic cylinder for varying surface height. Electro-hydraulic ergo lift system, rated to lift up to 1,000 lb, has 12 in. stroke that positions work surface to match operator's stature. Overall height of base and overhead structure adjusts from 72-84 in. Read More

Material Handling & Storage, Plant Furnishings & Accessories

Modular Shipping Workstation offers configuration flexibility.

January 11, 2012

As stand-up unit, 192 x 96 x 44 in. mobile shipping workstation provides consolidation point for fulfilling orders of small packaged parts and components. Design accommodates 2 associates and offers room enough to perform like-tasks while also accommodating expandability via construction with 28 mm plastic coated steel pipe and metal joints. Features include laminate work surface; modular, freestanding shelf surfaces; swivel casters; and 750 lb capacity. Read More

Material Handling & Storage

Transfer Cart moves grinding wheels from toolrooms to machines.

June 20, 2011

Custom built using 28 mm pipe and metal joints, Creform Cart enables one person to move heavy grinding wheels without aid of powered vehicle. Storage sections are adjustable to accommodate varying wheel widths, and angle of retaining supports allows wheels to be lifted in or out by hand or with lift assist device. Additional features include 4 in. urethane casters, 2 fixed and 2 with locking brakes, and abrasive-resistant UHMW polyethylene tubing on bottom support pipes. Read More

Material Handling & Storage

Mobile Flow Rack suits assembly and warehouse operations.

April 25, 2011

Flow rack has ergonomic design and drop-in low-friction roller tracks suited for use with carboard boxes or totes with soft bottoms or open cell designs. Featuring 750 lb capacity and 42 x 78 in. footprint, product includes six 4 in. dia urethane casters, and aluminum roller tracks available in 6, 9, 12, and 15 in. widths, with roller spacing at 1, 2, or 3 in. centers and lengths up to 12 ft. Boxes and totes are angled in supply lanes to optimize viewing and picking. Read More

Material Handling & Storage

Automated Tugger uses magnetic guidepath to transport carts.

December 9, 2010

Creform BST AGV drive unit functions as automated tugger, eliminating need for manned delivery vehicle, and drives under stationary cart equipped with BST hitch, extends tow pin into hitch, and delivers cart to designated work area. Able to retract tow pin and move out to pick up another cart, tugger can service fleet of carts. Product includes low-rolling resistance casters, obstacle sensor with 180° sensing angle, and threaded bolt holes for lifting rings, to ease servicing. Read More

Other Company News from
Creform Corp.