Sena U.S.A,
San Jose, CA 95134
Share:
Bluetooth to IP Gateway suits large-scale installations.
Parani100 connects Bluetooth devices to 10/100 Base-T Ethernet network, transmitting data from each Bluetooth terminal to management station via TCP/IP at rates to 723 Kbps over 120 m range (typ). Supporting point to multipoint connectivity to 7 points, unit is designed for wireless installations and supports various operating modes: TCP server, TCP client, repeater, vertex, and RS232. Supported...
Read More »
Serial Device Server supports 115 Kbit/s data transfer.
Wireless, single-port Model LS100W connects RS232 serial devices to host computer via 802.11b wireless LAN. On serial side, unit features 9-pin male DB-9 connector and 9-30 Vdc input. It uses 64/128-bit WEP protocol to protect data being transmitted over network. In infrastructure mode, Model LS100W transmits serial device data to host PC via access point. Ad-hoc mode provides full-duplex serial...
Read More »
Device Servers transfer data at 230 Kbit/s.
Based on embedded Linux and 32-bit microprocessor platform, PRO Series PS110, PS410, and PS810 provide 1, 4, and 8 ports, respectively. RS232/422/485 serial communication allows virtually any asynchronous serial device to be accessed over network via DB9 serial port. Featuring 10/100 Mbit/s Ethernet interface, servers support static and dynamic IP address, TCP/UDP multicasting, telnet COM port...
Read More »
Serial-Device Server enables remote LED-signboard control.
Model SS110 enables users to send messages to multiple signboards and access signboards from multiple locations across network. It supports TCP/UDP multicasting enhancement transmission method. Users specify host PC's IP address and port number in configuration menu. In TCP Server Mode, unit can accept TCP connection from control host and provide dual-direction transmission between control host...
Read More »
Embedded Board delivers industrial Ethernet.
Single-port serial Ethernet communication board, PS100B, brings RS232/422/485-based industrial devices under control of 10 Mbit/s Ethernet network. It incorporates selectable RS232/422/485 serial interface and transfers industrial device data up to 115 Kbit/s. Offering voltage from 9-30 V, it accommodates power requirements in industrial automation environments. Features include device management...
Read More »Serial-Ethernet Converter supports Dynamic DNS and PPPoE.
Linux-based HelloDevice SS100 employs 32-bit processor, embedded web server, and open Linux platform. It supports RS232/422/485 serial communication, allowing most asynchronous serial devices to be accessed over network via its DB9 serial port. Converter handles serial data transfer rates up to 230 kbps, supports TCP/UDP-based communication modes, and includes modem emulation mode, status...
Read More »
Serial-to-Ethernet Converter features 3DES data encryption.
HelloDevice Pro Series manages RS232/422/485-based serial devices over network. It provides IP address filtering to protect unintentional data streams from being transmitted to serial device. Static key-based 3DES data encryption promises secure data communication. Series supports open network protocols such as TCP/IP, UDP, and PPPoE allowing serial devices to be accessed over DSL-based broadband...
Read More »
Serial-to-Ethernet Converter supports TCP/UDP based modes.
Wireless HelloDevice Super Series manages RS232/422/485 based serial devices over network with features such as PCMCIA interface, flexible host mode, security, and event handling. Units present modem interface to serial device in modem emulation mode, accept AT modem commands, and make raw RS-232/422/485 data travel across local LAN. They run embedded Linux OS and support SSLv2, SSLv3, and TLSv1...
Read More »
Bluetooth to IP Gateway suits large-scale installations.
Parani100 connects Bluetooth devices to 10/100 Base-T Ethernet network, transmitting data from each Bluetooth terminal to management station via TCP/IP at rates to 723 Kbps over 120 m range (typ). Supporting point to multipoint connectivity to 7 points, unit is designed for wireless installations and supports various operating modes: TCP server, TCP client, repeater, vertex, and RS232. Supported...
Read More »Remote Device Monitoring & Management Summit
Remote Device Monitoring & Management Summit Sena Technologies, the leader in Device Networking, participated at the Remote Device Monitoring & Management Summit held in Atlanta, GA from 26th September to 28th September. The Remote Device Monitoring & Management Summit was organized by the International Quality & Productivity Center (IQPC), a leading conference producer. The summit demonstrated...
Read More »
Serial Device Server supports 115 Kbit/s data transfer.
Wireless, single-port Model LS100W connects RS232 serial devices to host computer via 802.11b wireless LAN. On serial side, unit features 9-pin male DB-9 connector and 9-30 Vdc input. It uses 64/128-bit WEP protocol to protect data being transmitted over network. In infrastructure mode, Model LS100W transmits serial device data to host PC via access point. Ad-hoc mode provides full-duplex serial...
Read More »
Device Servers transfer data at 230 Kbit/s.
Based on embedded Linux and 32-bit microprocessor platform, PRO Series PS110, PS410, and PS810 provide 1, 4, and 8 ports, respectively. RS232/422/485 serial communication allows virtually any asynchronous serial device to be accessed over network via DB9 serial port. Featuring 10/100 Mbit/s Ethernet interface, servers support static and dynamic IP address, TCP/UDP multicasting, telnet COM port...
Read More »
Serial-Device Server enables remote LED-signboard control.
Model SS110 enables users to send messages to multiple signboards and access signboards from multiple locations across network. It supports TCP/UDP multicasting enhancement transmission method. Users specify host PC's IP address and port number in configuration menu. In TCP Server Mode, unit can accept TCP connection from control host and provide dual-direction transmission between control host...
Read More »
Embedded Board delivers industrial Ethernet.
Single-port serial Ethernet communication board, PS100B, brings RS232/422/485-based industrial devices under control of 10 Mbit/s Ethernet network. It incorporates selectable RS232/422/485 serial interface and transfers industrial device data up to 115 Kbit/s. Offering voltage from 9-30 V, it accommodates power requirements in industrial automation environments. Features include device management...
Read More »Serial-Ethernet Converter supports Dynamic DNS and PPPoE.
Linux-based HelloDevice SS100 employs 32-bit processor, embedded web server, and open Linux platform. It supports RS232/422/485 serial communication, allowing most asynchronous serial devices to be accessed over network via its DB9 serial port. Converter handles serial data transfer rates up to 230 kbps, supports TCP/UDP-based communication modes, and includes modem emulation mode, status...
Read More »
Serial-to-Ethernet Converter features 3DES data encryption.
HelloDevice Pro Series manages RS232/422/485-based serial devices over network. It provides IP address filtering to protect unintentional data streams from being transmitted to serial device. Static key-based 3DES data encryption promises secure data communication. Series supports open network protocols such as TCP/IP, UDP, and PPPoE allowing serial devices to be accessed over DSL-based broadband...
Read More »
Serial-to-Ethernet Converter supports TCP/UDP based modes.
Wireless HelloDevice Super Series manages RS232/422/485 based serial devices over network with features such as PCMCIA interface, flexible host mode, security, and event handling. Units present modem interface to serial device in modem emulation mode, accept AT modem commands, and make raw RS-232/422/485 data travel across local LAN. They run embedded Linux OS and support SSLv2, SSLv3, and TLSv1...
Read More »