CTS Corp.
Elkhart, IN 46514
Share:
Clock Oscillators solve timing problem in ADCs.
With power consumption of ~100 mW and 5 x 7 mm footprint, VFAC3 Series generates less than 1 ps rms jitter and is available in frequencies of 80-170 MHz. Consuming about 1.2 W at steady state, VFOV110 Series offers noise floor of -174 dBc/Hz at 100 MHz. It is available in 25.4 x 22.0 mm surface mount package with frequency range of 25-135 MHz.
Read More »Jitter Attenuator delivers low noise timing solution.
Featuring internal voltage regulator, Model VFJA100 jitter attenuator provides output frequency of up to 1 GHz with ultra low jitter of less than 0.200 ps. Timing module integrates internal synthesizer that locks to input reference clock and multiplies it to desired output frequency. Unit is designed for applications in SONET/SDH/ATM, DWDM Line Card, 10 Gigabit Ethernet, and forward error...
Read More »Crystal Oscillator includes tristate enable/disable feature.
Model 357, 5 x 7 mm surface mount VCXO, has frequency signal output that will interface with HCMOS electronic circuitry. It is targeted to support SONET, DSL, and Cable Modem applications where frequency servo is required. Unit is offered in frequencies from 1.500 to 45.000 MHz. It features Average Pull Range of Ã-
Read More »Voltage Controlled Crystal Oscillator measures 5 x 7 mm.
Model 357 surface mount voltage controlled crystal oscillator (VCXO) offers frequency signal output that interfaces with HCMOS electronic circuitry. Available in frequencies from 1.500 to 45.000 MHz, Model 357 includes tristate feature, which enables output frequency to be electrically switched as to enable or disable frequency source. Its average pull range is Ã-
Read More »VCXOs and Clocks work with 10 Gigabit Ethernet and SONET.
PECL voltage controlled crystal oscillators and reference clocks support applications for WAN and LAN environments. Model 352 VCXO and Model 652 reference clock have choice of two switched outputs and can combine frequencies from 150 to 1,000 MHz. Model 352 VCXO maintains frequency stability of +/-20 ppm while Model 652 clock maintains stability at +/-30 ppm. Both operate in temperatures of -40...
Read More »Duplex Filter fits 800 MHz CDMA applications.
Model CER0046A ceramic monoblock duplexer has typical performance of better than 2.0 dB on transmitting (TX) insertion loss and 3.0 dB on receiving (RX) insertion loss. Typical applications include disposable wireless handsets.
Read More »CDMA Filter handles high data rates.
Miniature Model CER0059A receive, ceramic, monoblock filter, for North American PCS applications, measures 7 x 5.5 x 3.8 mm, making it suitable for most space-limited designs. It can be used for high data rate (HDR) wireless modem terminals in laptops, PDA's and handsets using 2.5G and 3G CDMA lx technology.
Read More »Clock Oscillators support fibre channel data storage.
CB3 106.25 MHz clocks are available in stability grades of 25, 50 and 100 ppm. They are offered for 3.3 and 5.0 Vdc systems and draw 40 and 50 mA, respectively. Output is CMOS compatible and includes output enable/disable feature. Four-pad, 5mm x 7mm surface-mount oscillator packages are compatible with SMT pick-and-place assembly equipment. Temperature ranges include 0 to 70Ã-
Read More »Clock Oscillators solve timing problem in ADCs.
With power consumption of ~100 mW and 5 x 7 mm footprint, VFAC3 Series generates less than 1 ps rms jitter and is available in frequencies of 80-170 MHz. Consuming about 1.2 W at steady state, VFOV110 Series offers noise floor of -174 dBc/Hz at 100 MHz. It is available in 25.4 x 22.0 mm surface mount package with frequency range of 25-135 MHz.
Read More »Jitter Attenuator delivers low noise timing solution.
Featuring internal voltage regulator, Model VFJA100 jitter attenuator provides output frequency of up to 1 GHz with ultra low jitter of less than 0.200 ps. Timing module integrates internal synthesizer that locks to input reference clock and multiplies it to desired output frequency. Unit is designed for applications in SONET/SDH/ATM, DWDM Line Card, 10 Gigabit Ethernet, and forward error...
Read More »Crystal Oscillator includes tristate enable/disable feature.
Model 357, 5 x 7 mm surface mount VCXO, has frequency signal output that will interface with HCMOS electronic circuitry. It is targeted to support SONET, DSL, and Cable Modem applications where frequency servo is required. Unit is offered in frequencies from 1.500 to 45.000 MHz. It features Average Pull Range of Ã-
Read More »Voltage Controlled Crystal Oscillator measures 5 x 7 mm.
Model 357 surface mount voltage controlled crystal oscillator (VCXO) offers frequency signal output that interfaces with HCMOS electronic circuitry. Available in frequencies from 1.500 to 45.000 MHz, Model 357 includes tristate feature, which enables output frequency to be electrically switched as to enable or disable frequency source. Its average pull range is Ã-
Read More »VCXOs and Clocks work with 10 Gigabit Ethernet and SONET.
PECL voltage controlled crystal oscillators and reference clocks support applications for WAN and LAN environments. Model 352 VCXO and Model 652 reference clock have choice of two switched outputs and can combine frequencies from 150 to 1,000 MHz. Model 352 VCXO maintains frequency stability of +/-20 ppm while Model 652 clock maintains stability at +/-30 ppm. Both operate in temperatures of -40...
Read More »Duplex Filter fits 800 MHz CDMA applications.
Model CER0046A ceramic monoblock duplexer has typical performance of better than 2.0 dB on transmitting (TX) insertion loss and 3.0 dB on receiving (RX) insertion loss. Typical applications include disposable wireless handsets.
Read More »CDMA Filter handles high data rates.
Miniature Model CER0059A receive, ceramic, monoblock filter, for North American PCS applications, measures 7 x 5.5 x 3.8 mm, making it suitable for most space-limited designs. It can be used for high data rate (HDR) wireless modem terminals in laptops, PDA's and handsets using 2.5G and 3G CDMA lx technology.
Read More »Clock Oscillators support fibre channel data storage.
CB3 106.25 MHz clocks are available in stability grades of 25, 50 and 100 ppm. They are offered for 3.3 and 5.0 Vdc systems and draw 40 and 50 mA, respectively. Output is CMOS compatible and includes output enable/disable feature. Four-pad, 5mm x 7mm surface-mount oscillator packages are compatible with SMT pick-and-place assembly equipment. Temperature ranges include 0 to 70Ã-
Read More »