Company News

Parker Hannifin Corporation

6035 Parkland Blvd., Cleveland, OH, 44124, USA

  • 800-272-7537

General Information:
Ben Thomas
Phone: 763-544-7781
E-mail this person

Latest New Product News from
Parker Hannifin Corporation

fluid & gas flow equipment, mechanical power transmission

Small-Frame Pumps have strength-optimized barrel bearing cages.

December 3, 2015

To meet performance demands of Tier 4 engines and powertrain systems, small-frame size 6/7/8 GOLD CUP® hydrostatic piston pumps feature bearing cage designs that maximize productivity and pump life. Size and thickness of Severe Duty barrel bearing lend to robust cage construction. Available for all Gold Cup frame sizes, Extreme Duty barrel bearing runs with low-viscosity and exotic fluids and accommodates high temperatures. Single-piece bronze cage optimizes strength and minimizes friction. Read More

fluid & gas flow equipment

Antimicrobial Polyurethane Tubing resists degradation.

October 24, 2014

Specially formulated with Sanitized®, Series EA resists degradation from mildew, algae, fungi, and biofilm. Product is non-leaching and is 100% treated without using silver additives. Antimicrobial additive is fully compounded into tubing to protect both inner and outer surfaces, benefiting water systems, food and beverage, or any application where microbes can cause problems. Available in ¼, 3/8, and ½ in. sizes, tubing is also BPA- and phthalate-free. Read More

mechanical power transmission, green & clean

HEV Motor provides up to 36 Nm torque.

October 9, 2014

Part of Global Vehicle Motor Series of PMAC traction motors, Model GVM142 features 142 mm frame size with SAE A adapter mount to be close coupled to hydraulic pumps. Within frame size, there are 3 rotor lengths and dozens of winding variations, allowing more than 100 combinations of base speed and power output. Operating from 24–800 Vdc, motor is rated from 2.6–30 kW+ with speed range from 1,600–9,800 rpm and peak power densities up to 3.7 kW/kg. Read More

fluid & gas flow equipment

Hydraulic Hoses and Fittings meet ISO 18752 specification.

October 7, 2014

Comprising 5 hydraulic hoses and 2 fittings, GlobalCore Series is designed to meet most common working pressures in industry—3,000 to 6,000 psi in sizes 4–32 in. Hoses are compatible with Parkrimp family of crimpers and feature no-skive, abrasion-resistant covers, minimizing downtime and extending intervals between replacements. Read More

fluid & gas flow equipment, mechanical power transmission

Sub-Sea Connectors offer redundant sealing.

May 1, 2014

Sub-Sea Coupling Solutions comprise coupling/fitting connections and configurations engineered to address challenges posed by sub-sea environment. Secure, repeatable connections and redundant sealing promote sustained performance. Depending on selection, standard sizes of fittings/coupling range from ¼–1 in. ID. Also available, 520N hydraulic hose features compact OD for facilitated routing and accelerated response. Read More


Maintenance Software lets users target unplanned downtime.

April 30, 2014

To prevent unplanned downtime, Parker Tracking System (PTS) Pro provides asset tracking and maintenance tools. Asset Management Dashboard lets users schedule inspections/replacements as needed, locate assets when maintenance is required, and record historical inspection details and results. Along with asset criticality settings, transfer, and batch maintenance, features include barcode, metal, or RFID tag generation; material and budgeting; and inspection template customization capabilities. Read More

mechanical power transmission, green & clean

Traction Motors serve EV and HEV applications.

January 28, 2014

Intended for electric and hybrid electric vehicle traction applications, Global Vehicle Motor (GVM) Series offers respective peak power and torque ranges of 8–325 kW and 76–703 Nm, base speed range of 843–7,575 rpm, and peak power densities to 4.2 kw/kg. With 210 mm frame size, GVM210 offers 6 rotor lengths and multiple winding variations. This enables 100+ combinations of base speed and peak power output for fine-tuning of vehicle performance. Operating voltages vary from 24–800 Vdc. Read More

machinery & machining tools

Flanging and Flaring Machine makes leak-free connections.

December 16, 2013

Capable of flanging and flaring ¼ x .028 in. through 1½ x .120 in. steel and stainless steel tube, Parflange ECO 25 creates leak-free Seal-Lok O-ring Face Seal and Triple-Lok 37° JIC tube connections up to 9,200 psi without brazing or welding. Mobile machine features orbital spindle motion and multi-functional tooling, creates smooth mating surface on flanges (90°) and flares (37°), and requires one die set per tube size for both flanging and flaring. Read More

fluid & gas flow equipment

Spiral Hoses suit heavy-duty applications.

December 4, 2013

Offered in -24 and -32 sizes with pressure ratings of 5,000 and 6,000 psi, no-skive Compact Spiral™ Hoses weigh less than SAE spiral hose and have smaller bending radii. Hoses are tested up to 2,000,000 impulse cycles and are available with nearly 300 fitting configurations. Offering direct routing options, large sizes meet market needs in oil and gas, mining, forestry, and heavy off-road equipment applications. Read More

sensors, monitors & transducers

Wireless Vibration Sensors advance predictive maintenance.

November 27, 2013

Intended for use as part of conditioning monitoring system, wireless vibration sensors attach to machinery and wirelessly transmit full dynamic vibration spectrum and temperature data to local server or cloud via receiver/gateway. Data transmission occurs based on user-selected time interval, and specific monitoring bands can be used to set alarm thresholds and create notifications. Measuring 1 x 1 x 2.5 in. (excluding antenna), sensors perform for up to 7 years on 3.6 V Li-ion battery. Read More

electrical equipment & systems, mechanical components & assemblies

Protective Hose Sleeve contains bursts at up to 12,000 psi.

November 6, 2013

Designed to prevent worker injuries and equipment damage from high-pressure hose bursts, Partek Defense® features endurance-boosting weave pattern that contains pressure and dissipates media within hose assemblies. MSHA-rated sleeving is highly flexible and does not restrict hose routings. As added benefit, fibers used to make sleeve are coated to protect hoses against sunlight, ozone, and other environmental conditions that cause deterioration. Read More

fluid & gas flow equipment

Thermoplastic Hose offers abrasion resistance.

August 20, 2013

Designed to withstand harsh environments, both internally and externally, Model 518D combines core material that resists permeation of hydraulic fluids with outer jacket that provides abrasion resistance. Non-conductive hose is available in sizes ranging from 3/16–¾ in. ID and can be supplied as bonded or multi-line assembly to further reduce jacket wear. Read More

fluid & gas flow equipment

Bellows Valves feature pressure rating of 2,500 psig CWP.

July 15, 2013

Designed for high temperature, high pressure instrumentation applications in power industry, FB Series Bellows Valves feature 316 SS construction and are available with welded or gasketed body to bellows sealing. Secondary packing system acts as backup seal above primary bellows seal, which is available in Grafoil® or PTFE with temperature ratings of -65 to 1,000°F and -65 to 450°F, respectively. Single and double ferrule tube compression ports come in ¼, 3/8, or ½ in. fractional sizes. Read More

display & presentation equipment

Factory Display delivers critical messages to factory floor.

June 10, 2013

To accelerate response to downs and non-conforming conditions, Parker Factory Display (PFD) visualization system provides workers with real-time situational awareness. Solution comes with controller-only option, HD flat panel display options up to 55 in., and version 3.0 of Windows® XP/7 (32-/ 64-bit) compatible PFD software. Standard features include built-in networking, and controller-only option is equipped with 80 GB SSD and includes 2 Ethernet ports. Read More

fluid & gas flow equipment

Electrically Heated Hoses offer customization options.

May 14, 2013

Designed for heating and conveying Diesel Exhaust Fluid through SCR system on commercial vehicles, Electrically Heated SCR Hose Assemblies are available in 3 and 4 mm Nylon options along with 4 and 5.5 mm EPDM hoses. SCR hoses encapsulate heating elements with extruded sheath for protection and uniform heating, and have overmold on fittings for impact and water resistance. Available for 12 or 24 V systems, hoses offer multiple options for fittings, electrical connectors, and overall lengths. Read More

fluid & gas flow equipment

Heated Hose Assemblies support range of fittings/connectors.

May 6, 2013

Electrically Heated SCR Hose Assemblies include 3 and 4 mm Nylon options along with 4 and 5.5 mm EPDM heated hoses. Also, custom solutions for DEF fill lines and other on-engine heated lines are available in sizes from 7.5–24 mm ID. Designed for heating and conveying DEF (Diesel Exhaust Fluid) throughout SCR system on commercial vehicles, SCR Hose features optimized thaw profile and encapsulate heating elements with extruded sheath for protection and uniform heating. Read More

fluid & gas flow equipment

Flow Control Valve integrates stream switching and filtering.

April 26, 2013

With modular design that facilitates maintenance, Gen II R-max™ offers backward compatibility so that features can be installed on existing R-max units – available in NC, NO, and single 3-way configurations. Captured vent prevents cross-contamination, and position indicator helps accelerate recognition of valve actuation. Featuring atmospheric reference vent module and surface mount technology, system is designed to control gases and liquids in analytical systems from vacuum to 500 psig. Read More

electronic components & devices

Mechanical Crimp Connection Adapter has leak-free design.

February 13, 2013

Comprised of one-piece crimp adapter with bite ring and internal sealing, Mechanical Crimp Connection (MCC) eliminates welding and ensures reliable, leak-free connection. Internal seals in MCC adapter ensure leak-free connection and protect against ingression. With working pressure capability of near 5,000 psi, MCC adapters are offered in carbon steel and achieve NPS pipe connections in common weld sizes from 1–2 in. Multiple end configurations are available. Read More


Hydraulic Oil Coolers serve mobile and industrial markets.

February 11, 2013

Heavy-duty hydraulic oil coolers are offered in 4 designs to accommodate needs of mobile and industrial applications. For industrial use, ULAC with AC motor has 400 hp max cooling capacity. ULOC cooling system, with 60 HP max cooling capacity, is also suited for industrial use. Mobile applications are accommodated via ULDC with DC motor which has 40 hp max cooling capacity and ULHC with hydraulic motor, which also serves industrial use and has 215 hp max cooling capacity. Read More

fluid & gas flow equipment

PVDF Tubing resists permeation and abrasion.

January 14, 2013

Featuring Shore D hardness of D75-D85, PVDF Tubing comes in Flex® and SuperFlex® designs for critical applications where abrasion and/or permeation is problematic. PVDF is suitable for applications requiring high purity, strength, and resistance to solvents. Material also has 94-VO rating, so it resists combustion and does not promote flame spread. Available in sizes from 1/8–1 in. OD, SuperFlex design offers 10x flexibility of standard Flex tubing. Read More

Other Company News from
Parker Hannifin Corporation