Company News

Murata Electronics North America, Inc.

2200 Lake Park Drive, Smyrna, GA, 30080, USA

  • 770-436-1300

Latest New Product News from
Murata Electronics North America, Inc.

Electronic Components & Devices

Hi-Cap MLCC Capacitors feature non-polarized construction.

March 20, 2017

Available in 1206 and 1210 case sizes, Hi-Cap MLCCs are suitable for power ICs and power output line filtering. Offering low ESL, low ESR and low ripple voltage and high frequency suppression, units provide capacitance of 150uF, 220uF and 330uF with 2.5V or 4V voltages.

Read More

Optics & Photonics

XRCED Series Crystal Unit offers ± 20 ppm frequency tolerance.

January 12, 2017

Incorporating unique technology, XRCED Series Crystal Unit provides low ESR. Operating in -30 to 85°C temperature, unit offers 60 ohms maximum ESR and 100 mW drive level. Meeting RoHS standards with XRCED37M400FXQ52R0 part number, unit allows lead free soldering. Products are used in smartphones, wearables, and hearing aids.

Read More

Electrical Equipment & Systems

Energy Device meets wireless sensor node demands.

July 28, 2016

Measuring 2.0 x 14.0 x 21.0 mm, UMAL High-Capacity Energy Source offers maintenance-free extended lifecycle, making it suitable for wireless sensor nodes, wearables, and backup power solutions. Thin laminate-type device has nominal voltage of 2.3 Vdc, can supply 12 mAh with max discharge current of 120 mA, and withstands load fluctuations. Operating from -20 to 70°C, unit has internal... Read More

Electronic Components & Devices

High Frequency Chip Inductors feature high-Q characteristics.

June 24, 2016

Supplied in 01005 size (0.4 x 0.2 mm) package, LQP02HQ Series consists of 57 devices with inductance values ranging from 0.4–22 nH and inductor tolerance of ±0.05 nH (0.4–1.5 nH). Film-type inductors feature optimum coil patterns and L-shaped electrode construction. Product line meets demand for complex RF circuit functionality in smartphones and other compact mobile devices. Read More

Electronic Components & Devices, Test & Measuring Instruments

Radiation Noise Suppressor doesn't degrade automotive audio sound.

June 9, 2016

Available in 0603 inch (1.6 x 0.8 mm) package, NFZ18SM_SZ series suppresses radiation noise in audio lines while maintaining sound quality in automotive infotainment applications. These multilayer noise filters, which achieve rated currents of 800.0 mA, 950.0 mA, 1.1 A, and 1.25 A, also deliver optimized THD+N characteristics. Inserting this series with audio line deteriorates audio... Read More

Health, Medical, & Dental Supplies and Equipment, Sensors Monitors & Transducers, Test & Measuring Instruments

Ballistocardiography Sensors offer continuous monitoring.

February 16, 2016

Designed for contact-less patient monitoring in elderly care centers and hospitals, Series SCA10H and SCA11H utilize MEMS accelerometers to provide vital sign information such as heart rate, heart rate variation, relative stroke volume, respiration rate, and bed occupancy. SCA10H-D01 solderable PCB module houses accelerometer and microcontroller with embedded algorithms, while SCA11H-A01... Read More

Electronic Components & Devices

Monolithic Ceramic Capacitors meet automotive standards.

February 2, 2016

Designed to meet AEC-Q200 Grade 2 standard, GRT Series is suited for automotive infotainment and comfort-and-convenience applications, such as navigation systems and audio equipment. Capacitors are available in case sizes of 0201 to 1210 with capacitance range of 1.0 pF to 100 µF and rated voltage of 4–100 Vdc. In addition, series delivers temperature characteristics of X5R, X6S, X7R, and... Read More

Electrical Equipment & Systems, Electronic Components & Devices

Miniaturized Energy Devices withstand load fluctuations.

January 12, 2016

Combining energy harvesting system, quick charge solution, and backup power supply in miniaturized package, UMAC Series provides maximum charge/discharge rate of 10 C (30 mA) and charge recovery rate of at least 90% after 1,000 cycles. Large-capacity, cylinder-type energy devices can be used as secondary batteries in same way as capacitors, making them suitable as power supplies for... Read More

Electronic Components & Devices, Mechanical Components and Assemblies

Power Line Common Mode Choke Coils serve automotive applications.

October 16, 2015

Capable of handling currents up to 5.6 A and operating temperature from -55 to +150°C, PLT5BPH Series AEC-Q200-compliant, wire wound-type, common mode choke coil targets automotive power line noise suppression. Case measures 5.0 x 5.0 mm, and common mode impedance ratings reach up to 500 Ω at 10 MHz. Due to benefits delivered to power line, this series is also suited for base station... Read More

Electrical Equipment & Systems, Test & Measuring Instruments

RF Wireless Modules offers high output power, data rates.

September 24, 2015

Suited for industrial, and medical applications, DNT Series incorporates frequency hopping spread spectrum (FHSS) for optimized interference immunity. Ranges cover up to 40 miles for 900 MHz installations and 10 miles for 2.4 GHz line of sight. Configurable with RF data rates up to 500 kbps in both 900 MHz and 2.4 GHz bands, modules also include DNT gateway and separate and secure LANs with... Read More

Electronic Components & Devices

Matching Device delivers IoT functionality as turnkey solution.

September 15, 2015

Intended for use in sub-GHz 802.15.4 wireless IoT applications, LFD21891MMF3D931 is optimized for use with Silicon Labs Si4461, 868 MHz wireless transceiver IC. This high frequency matching device, by incorporating all necessary components within 2.0 x 1.25 x 0.7 mm package, helps reduce product design cycle as well as required engineering resources. Read More

Electronic Components & Devices

Monolithic Ceramic Capacitors operate above 100 µF.

July 27, 2015

In addition to 1206 size models with 150 µF and 220 µF capacitance and rated voltage of 6.3 V, GRM Series includes 1210 size model with 330 µF capacitance and rated voltage of 4 V. All have M (±20%) deviation rating and X5R temperature characteristics such that capacitance change is no more than ±15% within temperature range of -55 to +85°C. Applications include decoupling on... Read More

Electrical Equipment & Systems, Electronic Components & Devices

Surface Mount Module provides data and power isolation.

July 22, 2015

Able to switch automatically between full-speed (12 Mbps) and low-speed (1.5 Mbps) operation as required by application, NMUSB202MC provides 2-port USB data and power isolation from one upstream port. Module counts as 2 USB hubs for cascaded applications when used in conjunction with host controller and provides full 5 V/500 mA power to each downstream port. Standard 250 VRMS reinforced... Read More

Services

Cloud-Based SaaS targets Automated Demand Response market.

June 30, 2015

In addition to automated performance of demand response actions, PowerConnectSM provides automated monitoring and testing of emergency power supply systems. This allows for aggregation of multiple facilities into single portal. Since solution is vendor neutral, it works with virtually any building management system. Unlike other solutions that require turning devices off, PowerConnect... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

MEMS Accelerometer Combined Gyroscope is optimized for stability.

June 12, 2015

Used for acceleration and angular rate detection in all 3 sensing axis directions, SCC2000 series consists of low-g, 3-axis accelerometer with 2 angular rate sensor options of X- or Z-axis detection combined with 32-bit digital SPI interface. Z axis gyroscope version lets designers implement 6DOF sensor solution on one application PCB. Supplied in 24-pin, 15.00 x 8.50 x 4.35... Read More

Electrical Equipment & Systems

AC/DC Power Supply offers 95.5% efficiency at 50% full load.

March 30, 2015

Packaged in 2U format, Model D2U5T-H3-7000 provides 54 Vdc output at up to 7,000 W from 480 Vac input. User selectable standby output offers 3.3 or 5 Vdc, and up to 3,500 W can be delivered from 230 VAC input. Providing true 3-wire 3-phase operation without need for neutral connection, fan-cooled power supply accommodates input voltages from 180–264 Vac for 3,500 W operation and 320–525 Vac... Read More

Electrical Equipment & Systems

AC- and DC-Input Power Converters have 38 W/in.³ power density.

March 12, 2015

Designed to fit 1U enclosures, D1U86P Series achieves 94% efficiency at 50% load, offers 12 msec hold up time, occupies 86 x 197.7 mm footprint, and generates main output of 12 Vdc. Standby output of 12 Vdc is offered for power management circuitry, and main DC output delivers up to 133.3 A with droop current sharing when paralleling multiple power supplies. Output ratings are 1,600 W for... Read More

Optics & Photonics

High-Performance Crystals target automotive industry needs.

February 10, 2015

Comprising 2016-size (2.0 x 1.6 mm) crystals, XRCGB-F-A series supports frequencies from 24–48 MHz and exhibits frequency tolerance of ±30 ppm and frequency temperature stability of ±35 ppm within typical automobile operating range of -40 to +125°C. These AEC-Q200 compliant products are suitable for next-generation automotive LANs, such as Ethernet, or image processing ECUs as well as... Read More

Communication Systems & Equipment, Electrical Equipment & Systems, Electronic Components & Devices, Test & Measuring Instruments

EMI Suppression Filters offer high attenuation rates.

January 26, 2015

Employing exclusive circuit configuration combining capacitors and ferrite beads, BNX026/27/28/29 Series comprises LC combined-type EMI suppression filters offering attenuation rates of 35 dB or more over wide frequency range of 15 kHz to 1 GHz. Surface mount DC line noise filters with current rating of 15 A are suited for power supply circuits susceptible to low-frequency-band noise, while parts... Read More

Electrical Equipment & Systems, Test & Measuring Instruments

Digitally Controlled POL DC/DC Converters deliver 50 A/165 W.

December 18, 2014

Supplied in 30.85 x 20.0 x 8.2 mm module, OKDx-T/50 series accommodates 4.5–14 Vdc input and provides configurable output from 0.6–3.3 Vdc. Typ efficiency is 97.2% at 5 Vin, 3.3 Vout and with 50% load. Available in through-hole, single-in-line, and SMT formats, converters can be configured and monitored using PMBus commands. Standard features include Dynamic Loop Compensation, Non-Linear... Read More

Other Company News from
Murata Electronics North America, Inc.