Turning Machinery

Tooling System facilitates hard part turning.
Turning Machinery

Tooling System facilitates hard part turning.

Machining steels and alloys hardened to 45-62 Rc levels, ValEDGE Hard Part Turning System utilizes ceramic and CBN inserts as well as ValTURN(TM) ProGRIP(TM) toolholders. It is provided with T-Land corner break width and angle as well as light hone finish. For vibration-free machining, spring-loaded clamp grips insert in 2 places. Inserts, offered with 35, 55, 60, 80, and 90° geometries,...

Read More »
Vertical Turning Center offers self-loading operation.
Turning Machinery

Vertical Turning Center offers self-loading operation.

Suited for automotive parts suppliers and production job shops, inverted-spindle BLUETURN 250 features turn/swing diameter of 250/320 mm, rapid traverse rates of 60 m/min, and acceleration rate of 6 m/sÂ-². It includes 12-station turret with DIN 69880 VDI 40 tool holder adapter. GE Fanuc 21i controller provides straightforward operator interface and interactive screens. Turning program can...

Read More »
Multi-Tasking Turning Center can finish part in one setup.
Turning Machinery

Multi-Tasking Turning Center can finish part in one setup.

Combining turning and milling functions on 4 axes, Model SKT2500MT features symmetrical head stock with built-in 30 hp spindle motor, which helps prevent heat generation. It includes 22-tool high-speed ATC and Fanuc 18ITB control with 320 m memory. For manufacturing complicated parts, tool head with contouring B-axis offers 0.001° NC indexing. Able to work simultaneously with 4 or 5 axes,...

Read More »
Turning Center features 30 hp spindle motor.
Turning Machinery

Turning Center features 30 hp spindle motor.

Equipped with base mounted tooling system, Model SKT 250MS offers maximum swing of 24.4 in., 15.9 in. turning diameter, and X, Z, B axis traverses of 11.4, 29.5, and 27.6 in., respectively. Main spindle features max speed of 3,500 rpm, while sub-spindle with 8 in. chuck operates at 4,000 rpm. Three-piece coupling enables heavy cutting as well as milling. Offering 0.001° NC indexing, Model...

Read More »
Milling Machines

Vertical Turning/Milling Machine suits large, complex parts.

Model VTM-80YB offers X-, Y-, and Z-axis travel of 44.0, ±13.98, and 44.69 in., respectively. Pivoting spindle B-axis, combined with rotating C-axis, can accomplish indexing, 5-axis machining. B-axis can be used to drill horizontal, vertical, and diagonal holes, while long-stroke Y-axis permits high-speed, high-precision drilling. Machine accepts loads up to 3,300 lb and features 18.5/15 kW...

Read More »
Bar Machine suits high-volume applications.
Turning Machinery

Bar Machine suits high-volume applications.

Featuring hydraulic collet chuck and automatic parts unloading, CNC 30 G incorporates U-shaped cross slide gang tooling with T slots for tool-holder positioning. Machine has 94.5 x 86.6 in. footprint and includes interactive programming screens, 5,500 rpm spindle, 7.5 hp ac motor, and GE Fanuc 0i-Mate control. Max bar capacities are 1.625 in. round, 1.250 in. hex and 1.00 in. square, with max bar...

Read More »
Parts Feeders

Spindle Machines include integrated bar loader.

Single-spindle, Models Deco 10a and 13a feature Robobar SBF 216, which reduces channel guide changeover time down to 15 min. With quick-change system, operators index guide block to proper size capacity and changeover is complete. System accommodates up to 150 bars in sizes from 2-16 mm. Gripper system adjusts to whatever bar size is being used in machine. All setups are integrated into machine...

Read More »
Digital Replay and Copy System has SCSI interface.
Audio Visual (AV) Equipment

Digital Replay and Copy System has SCSI interface.

Compatible with A, D, and GSR Series digital recorders, W Series provides digital-to-digital copying of recorded media such as DLT or AIT Tapes, Hard Disks, and Solid State flash memory. System is also compatible with media recorded in Heim DATaRec and IRIG106 Chapter 10 formats. Models are available with single or dual plug-in cartridge receivers. Data transfer to host computer is done via...

Read More »
Trunnion Machines suit high-volume part manufacturing.
Turning Machinery

Trunnion Machines suit high-volume part manufacturing.

Model HPT features 8 workholding stations, each with its own spindle and 2-jaw chuck, while Model HDT features 6. Model HPT can be equipped with up to 20 separate sliding tool carriers, and Model HDT can be configured with up to 15. Heads can be arranged in horizontal and radial positions to machine multiple features at each station. Sliding spindle carrier allows most cutting tools to be changed...

Read More »
Milling Machines

Multifunction Machine Tools perform milling and turning.

EMCOTURN 420MC has 2 main spindles, 2 counter spindles, and 2 tool turrets. It handles simultaneous machining of two parts without interruption or collisions. Digital drives produce performance in both main spindle and X and Z axes. HYPERTURN 665MC combines 4 axis turning capability with Y and B axes, adjustable milling spindle, cross-roller linear guides, and easily accessible tool turrets. It...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics