Terminal Blocks

New Cooper Bussmann® UL1953 Listed Enclosed Power Distribution Blocks Offer High Short-Circuit Current Ratings
Terminal Blocks

New Cooper Bussmann® UL1953 Listed Enclosed Power Distribution Blocks Offer High Short-Circuit Current Ratings

ST. LOUIS, March 1, 2007 - With high short-circuit current ratings (SCCRs) of up to 200kA, the new Cooper Bussmann® enclosed power distribution blocks are the first of their kind to be UL1953 Listed and also recognized as being IP-20 finger-safe under specific conditions. The enclosed power distribution blocks can replace low-rated power distribution blocks to achieve higher assembly SCCR,...

Read More »
PCB Connectors suit high voltage applications.
Terminal Blocks

PCB Connectors suit high voltage applications.

Suited for wire-to-board applications, GMSTB(A) 2.5 HC(V) consists of high-voltage header and plug with screw connection. It features 7.62 mm pitch and voltage ratings of 1,000 V IEC, 600 V UL. Integrated double-steel covering springs provide contact safety even at high power, severe temperature fluctuations, and in high-vibration environments. Available with 1-12 positions, MKDS 5 HV fixed PCB...

Read More »
Terminal Blocks offer 90° lead bends.
Terminal Blocks

Terminal Blocks offer 90° lead bends.

Featuring bent lead design for installation on PCBs, Barrier Strip Terminal Blocks provide EMI/RFI filtering of ac and dc power and control lines. They are rated at 20 A, and feature capacitance values from 2,500-5,200 pF. UL recognized and CSA approved for dc voltages, units come in 2 through 6 terminal sizes and are appropriate for filtering power supplies in telecommunications equipment,...

Read More »
Terminal Connectors save PC board space.
Terminal Blocks

Terminal Connectors save PC board space.

Available in side stackable and polarized versions, CUF Series Female Connectors directly connect to comb edged male connector built on appropriate circuit board. With pole pitches of 5 and 10 mm, side-stackable units feature 2-16 poles, accommodating wire sizes from 12-30 AWG. Polarized versions come in 5-16 poles for 5 mm pitch and 2-8 poles for 10 mm pitch. Operating voltage for both types is...

Read More »
Terminal Blocks feature low profile and angled wire entry.
Terminal Blocks

Terminal Blocks feature low profile and angled wire entry.

With profile height of 8.5 mm and 55° angle of wire entry, MTB Series is furnished with double captive screws of nickel plated copper alloy with accessible testing points and housed in PA6-6 polyamide. Series is offered in configurations from 2-18 poles at 3.5 mm pitch, accepting wire size range of up to 16 AWG. Rated voltage is at 300 V with current rating up to 17.5 A, depending on...

Read More »
Modular Terminal Blocks feature multi-level design.
Terminal Blocks

Modular Terminal Blocks feature multi-level design.

With up to 4 staggered levels of poles, PSQ Series offers maximum accessibility for all connection points. Units are available with 2-12 poles, in 5 and 10 mm pole pitches and accept wire sizes up to 11 AWG. Wire connections utilize M3 screws made of nickel-plated copper alloy. Rated for 300 V at 32 A, terminal blocks have PA6-6 polyamide housing and are CE, UL, CSA, VDE, and IMQ approved.

Read More »
Terminal Blocks are used for bridging of circuits.
Terminal Blocks

Terminal Blocks are used for bridging of circuits.

With ability to accept wires ranging from 6-24 AWG, CBC series terminal blocks are designed to address applications where bridging of circuits is required for consecutive, alternate, and numerous terminal blocks in one assembly. Bridging is accomplished with Easy Bridge System comb-type bridge ranging from 2 to 50 positions. Available in 4 sizes and made of UL94V-0 polyamide insulating body,...

Read More »
Terminal Blocks

Terminal Block incorporates double level spring clamp.

Modular double level DIN rail terminal block features 26-14 AWG wire rated spring clamp connection on one side and industry standard pluggable terminal block on opposite side. Individual terminal blocks can be mounted beside each other in groups from 2-24 positions so that pluggable terminal blocks can be inserted at lower/upper level in equal number of positions. As terminal blocks are angled,...

Read More »
Modular Terminal Blocks suit limited-space applications.
Terminal Blocks

Modular Terminal Blocks suit limited-space applications.

Featuring vibration-proof, tension clamp connections, Z-Compact mini terminal blocks are UL-rated for 300 V, 20 A and carry UL 94 V-0 flammability rating. Model ZDU 2.5N single-level feedthrough terminal measures 1.4 in. long and mounts on TS-35 DIN-rail. Unit features one pluggable jumpering channel per terminal block and is offered in 3 and 4 branch configurations. Dual level versions, such as...

Read More »
Terminal Blocks

Fuse Terminal Blocks provide branch circuit protection.

UL-Listed for Branch Circuit applications, Class CC Fuse Holder (UK 10.3-CC HESI) is marked with Class CC Only and will reject 10.3 x 38 mm fuses. It is available with Short-Circuit Current Rating (SCCR) of 200 kA. Also available, UK 20.6-J HESI and UK 27-J HESI are UL-Listed Class J versions that respectively accept Class J fuses up to 30 and 60 A and have SCCR of 200 kA. All versions are...

Read More »
Gorbel Introduces New Mobile Fall Protection Unit
Sponsored

Gorbel Introduces New Mobile Fall Protection Unit

Providing adequate fall protection is always a critical consideration and one that in many cases can be difficult to ensure. The new Mobile Fall Protection Unit is designed to facilitate positive fall protection in applications that would typically be difficult or impossible to provide with standard methods. To learn all about the advantages and convenience, see our video.

Read More »

All Topics