PCB Connectors suit high voltage applications.
Suited for wire-to-board applications, GMSTB(A) 2.5 HC(V) consists of high-voltage header and plug with screw connection. It features 7.62 mm pitch and voltage ratings of 1,000 V IEC, 600 V UL. Integrated double-steel covering springs provide contact safety even at high power, severe temperature fluctuations, and in high-vibration environments. Available with 1-12 positions, MKDS 5 HV fixed PCB...
Read More »
Terminal Blocks offer 90-
Featuring bent lead design for installation on PCBs, Barrier Strip Terminal Blocks provide EMI/RFI filtering of ac and dc power and control lines. They are rated at 20 A, and feature capacitance values from 2,500-5,200 pF. UL recognized and CSA approved for dc voltages, units come in 2 through 6 terminal sizes and are appropriate for filtering power supplies in telecommunications equipment,...
Read More »
Terminal Connectors save PC board space.
Available in side stackable and polarized versions, CUF Series Female Connectors directly connect to comb edged male connector built on appropriate circuit board. With pole pitches of 5 and 10 mm, side-stackable units feature 2-16 poles, accommodating wire sizes from 12-30 AWG. Polarized versions come in 5-16 poles for 5 mm pitch and 2-8 poles for 10 mm pitch. Operating voltage for both types is...
Read More »
Terminal Blocks feature low profile and angled wire entry.
With profile height of 8.5 mm and 55Ã-
Read More »
Considerations for Choosing a Plastic Injection Molder
Choosing a plastic injection molder is no small decision. There are a number of factors that play into your selection, and it's important to consider them all to ensure you find the plastic injection molding company that suits your unique needs. This eBook is your guide to identifying those factors to help you make an informed decision.
Read More »
Modular Terminal Blocks feature multi-level design.
With up to 4 staggered levels of poles, PSQ Series offers maximum accessibility for all connection points. Units are available with 2-12 poles, in 5 and 10 mm pole pitches and accept wire sizes up to 11 AWG. Wire connections utilize M3 screws made of nickel-plated copper alloy. Rated for 300 V at 32 A, terminal blocks have PA6-6 polyamide housing and are CE, UL, CSA, VDE, and IMQ approved.
Read More »
Terminal Blocks are used for bridging of circuits.
With ability to accept wires ranging from 6-24 AWG, CBC series terminal blocks are designed to address applications where bridging of circuits is required for consecutive, alternate, and numerous terminal blocks in one assembly. Bridging is accomplished with Easy Bridge System comb-type bridge ranging from 2 to 50 positions. Available in 4 sizes and made of UL94V-0 polyamide insulating body,...
Read More »Miniature Terminal Blocks conserve cabinet space.
Miniature Double Level Terminal Blocks, ASIMBKKB series, offer 2 circuits per terminal block and can be mounted on 15 or 35 mm DIN rail. With current rating up to 20 A @ 300 V and wiring capacity of 30-10 AWG, series conserves space in cabinets along DIN rail with its 2 wiring levels that allow block to have double packing density. PV version can function as power distribution block because its...
Read More »
Plug Connectors offer choice of connection technologies.
Available in screw, spring, or IDC (insulation displacement connection) technologies, COMBI plug connectors plug into DIN-mounted pluggable terminal blocks, and use same plug-in zones for all basic blocks. Standard plugs (UP, SP, QP) feature wire exit on top, while plugs with screw and spring-cage technology (UPBV, SPV) have side wire exit. Units are available in pre-assembled position sizes or...
Read More »
Terminal Blocks accept 4 plug-in connectors.
Included in WeiCoS (Weidmuller Connection System) terminal block series, ZT4/2AN/1 and ZTPE4/2AN/1 are 4 mmÃ-² models that carry 600 V/32 A electrical rating and handle up to 10 AWG conductors. They combine terminal block and plug-in connection technology, resulting in modular, functionally flexible, and manufacturer-independent wiring system. Externally-tensioned contact and locking element...
Read More »
Terminal Blocks suit standard wire termination applications.
Ring-lug terminal blocks offer hinged shroud for safe wiring, and finger-safe design to eliminate need for standard/customized dust cover. Used together, WTL 6/4 FF (slide link terminal) and WTD 6/4 FF (standard feed-through) terminal can be configured to create multiple phase testing configurations for current transformer applications. Disconnect test terminals feature combi foot design for...
Read More »
Do You Have Unique Lifting Needs?
EZRig Cranes offers lifting solutions that are engineered for robust performance, providing the ultimate in portability. Designed for real-world lifting needs, our products are small and light with options and features that make them ideal for a broad range of applications. See our video to learn how an EZRig Crane can simplify your lifting requirements.
Read More »
