ETS Series Temperature Sensors feature built-in 4-digit display.
Combined with precision RTD sensing element, measuring electronics and process fitting in stainless steel transmitter probe, ETS Series Temperature Sensors feature pushbutton for setting up sensors. Designed with two solid state switch outputs, two yellow LED indicators, unit’s display can be electronically flipped 180° and housing can be rotated up to 310° after installation.
Read More »
EN1752 Temperature Detector comes with preconfigured set points.
Used in server rooms, storage areas, refrigerators, freezers, and pipe chases for pre-freeze warnings, EN1752 Temperature Detector comes with programming software which is compatible with PCs running on windows 10 or higher operating system. Having 80°F and 40°F preconfigured high and low set points, units can be customized using programmable cable accessory (ACC17XX) and PC software...
Read More »
EN1752 Temperature Detector comes with preconfigured set points.
Used in server rooms, storage areas, refrigerators, freezers, and pipe chases for pre-freeze warnings, EN1752 Temperature Detector comes with programming software which is compatible with PCs running on windows 10 or higher operating system. Having 80°F and 40°F preconfigured high and low set points, units can be customized using programmable cable accessory (ACC17XX) and PC software...
Read More »
1115 Wireless Temperature and Flood Detector can be programmed to four zones.
Designed with internal temperature sensor for detecting temperature ranges, 1115 Wireless Temperature and Flood Detector can be used for monitoring refrigerated or freezing temperatures and flood conditions when combined with T280R Temperature and 470PB Water Sensor Probe respectively. Compatible with DMP 1100 series wireless receivers and repeaters, unit is available in 1115-W, 1115-W/470PB,...
Read More »
Commercial Kitchen Ventilation Systems
If you can't stand the heat, don't get out of the kitchen! Download this white paper and see how you can improve your commercial kitchen ventilation system.
Read More »
1115 Wireless Temperature and Flood Detector can be programmed to four zones.
Designed with internal temperature sensor for detecting temperature ranges, 1115 Wireless Temperature and Flood Detector can be used for monitoring refrigerated or freezing temperatures and flood conditions when combined with T280R Temperature and 470PB Water Sensor Probe respectively. Compatible with DMP 1100 series wireless receivers and repeaters, unit is available in 1115-W, 1115-W/470PB,...
Read More »
DG Series Thermistors feature 32 AWG dumet wire leads.
Available in 10 kΩ, 40 kΩ, 50 kΩ, and 100 kΩ resistance values, DG Series Thermistors feature 3.0 mW/°C dissipation constant and 6 s thermal time constant. Operating in -55 °C to +200 °C temperature range, units provide TCR of -3.9%/°C, -4.40 %/°C, and -4.75 %/°C and beta values of 3500 °K, 3950 °K, and 4200 °K. Designed in 1.5 mm diameter, thermistors allow for encapsulation of ring...
Read More »
DG Series Thermistors feature 32 AWG dumet wire leads.
Available in 10 kΩ, 40 kΩ, 50 kΩ, and 100 kΩ resistance values, DG Series Thermistors feature 3.0 mW/°C dissipation constant and 6 s thermal time constant. Operating in -55 °C to +200 °C temperature range, units provide TCR of -3.9%/°C, -4.40 %/°C, and -4.75 %/°C and beta values of 3500 °K, 3950 °K, and 4200 °K. Designed in 1.5 mm diameter, thermistors allow for encapsulation of ring...
Read More »
Low Cost OEM Solution for Fiber Optic Temperature Measurement Debuts at SPIE Photonics West 2017
Designed for Environments where Thermocouples and RTDs Fall Short Camarillo, CA - January 6, 2017 - Debuting at SPIE Photonics West 2017 (January 31- February 2, 2017), Micronor (Camarillo, CA USA) and Optocon AG (Dresden, Germany) have collaborated to create the FOTEMP1-OEM-MNT; a low cost, small form factor, single channel signal conditioner that seamlessly integrates Fiber Optic Temperature...
Read More »
Low Cost OEM Solution for Fiber Optic Temperature Measurement Debuts at SPIE Photonics West 2017
Designed for Environments where Thermocouples and RTDs Fall Short Camarillo, CA - January 6, 2017 - Debuting at SPIE Photonics West 2017 (January 31- February 2, 2017), Micronor (Camarillo, CA USA) and Optocon AG (Dresden, Germany) have collaborated to create the FOTEMP1-OEM-MNT; a low cost, small form factor, single channel signal conditioner that seamlessly integrates Fiber Optic Temperature...
Read More »
Micro-Hybrid Hermeseal® Hermetic Packaging for NDIR Components
Micro-Hybrid has developed the Hermeseal® hermetic packaging for NDIR components; pyroelectric and thermopile detectors and IR sources. The Hermeseal® hermetic packaging is needed for applications where: • Low molecular weight gases like krypton that leak through an epoxy seal are used for high performance (Higher D* detectivity in detectors and higher output in IR sources) • High...
Read More »
ISO-Certified J&D Tube Benders Delivers Rapid Tubeline Fabrication Services
J&D Tube Benders' laser cutting and machining services provide accurate and complex features on tubes of all shapes and sizes. Check out the video to learn more!
Read More »
