Temperature Sensors / Detectors / Transducers

Micronor Fiber Optic Temperature Sensor Presentation at Sensors Expo, June 28, 2017 at 11am
Temperature Sensors / Detectors / Transducers

Micronor Fiber Optic Temperature Sensor Presentation at Sensors Expo, June 28, 2017 at 11am

Debuting at Sensors Expo (June 28-29, 2017), Micronor (Camarillo, CA USA) and Optocon AG (Dresden, Germany) have collaborated to create the FOTEMP1-OEM-MNT; a low cost, small form factor, single channel signal conditioner that seamlessly integrates Fiber Optic Temperature Sensing into any industrial control system, medical instrumentation or other OEM design. The compact FOTEMP1-OEM-MNT...

Read More »
Temperature/Humidity Sensor comes with touch-sensitive mode button.
Temperature Sensors / Detectors / Transducers

Temperature/Humidity Sensor comes with touch-sensitive mode button.

Featuring three-digit, seven-segment display with °F, °C and % indicators and character height of 0.39 in., Temperature/Humidity Sensor with 69 x 38 x 108 mm dimensions is wall mountable. Supporting applications from -4 to 140°F temperature range and 0 to 90% relative humidity, unit comes with touch sensitive LED light button. CAT5/5e/6/6a cable of 305 m can be connected between the sensor and...

Read More »
CHT-FS Series Sensors feature flexible stem design.
Temperature Sensors / Detectors / Transducers

CHT-FS Series Sensors feature flexible stem design.

Suitable for UAVs, light aircraft, power generators and motorsports applications, CHT-FS Series Cylinder Head Temperature Sensors are installed under spark plug or head bolt. Available for 10, 12, 14, or 18 mm OD bolts/spark plugs, units are operated in -40°C to +1000°C temperature range. Used for monitoring engine performance and critical over-temperature conditions, sensor’s stem design...

Read More »
ETS Series Temperature Sensors feature built-in 4-digit display.
Temperature Sensors / Detectors / Transducers

ETS Series Temperature Sensors feature built-in 4-digit display.

Combined with precision RTD sensing element, measuring electronics and process fitting in stainless steel transmitter probe, ETS Series Temperature Sensors feature pushbutton for setting up sensors. Designed with two solid state switch outputs, two yellow LED indicators, unit’s display can be electronically flipped 180° and housing can be rotated up to 310° after installation.

Read More »
EN1752 Temperature Detector comes with preconfigured set points.
Temperature Sensors / Detectors / Transducers

EN1752 Temperature Detector comes with preconfigured set points.

Used in server rooms, storage areas, refrigerators, freezers, and pipe chases for pre-freeze warnings, EN1752 Temperature Detector comes with programming software which is compatible with PCs running on windows 10 or higher operating system. Having 80°F and 40°F preconfigured high and low set points, units can be customized using programmable cable accessory (ACC17XX) and PC software...

Read More »
1115 Wireless Temperature and Flood Detector can be programmed to four zones.
Temperature Sensors / Detectors / Transducers

1115 Wireless Temperature and Flood Detector can be programmed to four zones.

Designed with internal temperature sensor for detecting temperature ranges, 1115 Wireless Temperature and Flood Detector can be used for monitoring refrigerated or freezing temperatures and flood conditions when combined with T280R Temperature and 470PB Water Sensor Probe respectively. Compatible with DMP 1100 series wireless receivers and repeaters, unit is available in 1115-W, 1115-W/470PB,...

Read More »
DG Series Thermistors feature 32 AWG dumet wire leads.
Temperature Sensors / Detectors / Transducers

DG Series Thermistors feature 32 AWG dumet wire leads.

Available in 10 kΩ, 40 kΩ, 50 kΩ, and 100 kΩ resistance values, DG Series Thermistors feature 3.0 mW/°C dissipation constant and 6 s thermal time constant. Operating in -55 °C to +200 °C temperature range, units provide TCR of -3.9%/°C, -4.40 %/°C, and -4.75 %/°C and beta values of 3500 °K, 3950 °K, and 4200 °K. Designed in 1.5 mm diameter, thermistors allow for encapsulation of ring...

Read More »
Low Cost OEM Solution for Fiber Optic Temperature Measurement Debuts at SPIE Photonics West 2017
Temperature Sensors / Detectors / Transducers

Low Cost OEM Solution for Fiber Optic Temperature Measurement Debuts at SPIE Photonics West 2017

Designed for Environments where Thermocouples and RTDs Fall Short Camarillo, CA - January 6, 2017 - Debuting at SPIE Photonics West 2017 (January 31- February 2, 2017), Micronor (Camarillo, CA USA) and Optocon AG (Dresden, Germany) have collaborated to create the FOTEMP1-OEM-MNT; a low cost, small form factor, single channel signal conditioner that seamlessly integrates Fiber Optic Temperature...

Read More »
Micro-Hybrid Hermeseal® Hermetic Packaging for NDIR Components
Temperature Sensors / Detectors / Transducers

Micro-Hybrid Hermeseal® Hermetic Packaging for NDIR Components

Micro-Hybrid has developed the Hermeseal® hermetic packaging for NDIR components; pyroelectric and thermopile detectors and IR sources. The Hermeseal® hermetic packaging is needed for applications where: • Low molecular weight gases like krypton that leak through an epoxy seal are used for high performance (Higher D* detectivity in detectors and higher output in IR sources) • High...

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics