ANDA Networks and Nortel Sign Agreement to Provide Bundled End-to-End Carrier Solution for the Mid-Band Ethernet Market
Nortel to Provide ANDA MEF Certified EtherToneÃ-® Platforms with Nortel's OME 6500 for Carriers to Address the Multibillion-dollar Mid-Band Ethernet Opportunity CHICAGO, June 19 - NXTcomm - ANDA Networks, the leader in carrier-class fiber and copper-based access network platforms, announced today that Nortel has signed an agreement to bundle and resell ANDA's EtherReach 2000 units with...
Read More »
SPDT Switch offers high isolation in un-powered state.
Housed in surface mount PGFN package, Model MASWSS0201 maintains isolation greater than 63 dB up to 110 MHz and 45 dB up to 900 MHz while maintaining low insertion loss. When switch is up-powered, it automatically enables default-on state. Tested in 75 W system, broadband switch achieves less than 0.9 dB of insertion loss and 65 dB of isolation at 100 MHz. Unit is fabricated on 0.5 micron...
Read More »Frost & Sullivan Commends Power Distribution's Expanding and Comprehensive Product Line in the Static Transfer Switch Market
(Palo Alto, Calif. - July 17, 2007) - Frost & Sullivan selected Power Distribution, Inc. (PDI) as the recipient of the 2007 North American Frost & Sullivan Award for Product Differentiation Innovation for introducing the WaveStar(TM) communications package in the static transfer switch market. PDI's modern production and test facilities provide customized, quality products and solutions. PDI has...
Read More »Lantronix Expands Industrial Device Networking Solutions with New Line of Ruggedized Ethernet Switches
Six new products launch the XPress-Pro family of industrial Ethernet switches offering a full range of managed and unmanaged network connectivity solutions for use in harsh environments IRVINE, Calif., July 11, 2007 - Lantronix, Inc. (Nasdaq: LTRX), today announced the expansion of its Industrial Device Networking product offerings with a new family of industrial Ethernet switches. The XPress-Pro...
Read More »
Advantages of VPSA Technology for Your Application
VPSA technology uses different equipment than PSA and requires significantly less energy, resulting in an average cost savings of one-third to one-half in comparison to PSA systems.
Read More »Tact Switch features ultra-miniature design.
Measuring 4.5 x 6.8 x 2 mm, Model TL3200 features dual LEDs with single or dual color options available in red, green, or yellow. Unit has contact rating of 50 mA at 12 Vdc, contact resistance of 500 mW, and dielectric strength of 250 Vac. Operating from -25 to +85Ã-
Read More »Sonus Networks and Operax Extend Standards-Based Ecosystem through Partnership
Integration of Operax dynamic Bandwidth Management solutions with Sonus' Network Border Switch Enables Network Operators to Deploy TISPAN-Compliant Border Gateway Function (BGF) WESTFORD, Mass. and STOCKHOLM, Sweden, June 18 - Sonus Networks NXTcomm BOOTH #4215 - Operax NXTcomm BOOTH #6922 - Sonus Networks (NASDAQ:SONS), a leading supplier of service provider Voice over IP (VoIP) infrastructure...
Read More »NEC Chooses Altera Stratix II GX FPGAs for New ExpEther Interface Technology
PCI Express-to-Gigabit Ethernet Interface to be Demonstrated at INTEROP Tokyo and HOT CHIPS Symposium SAN JOSE, Calif., June 18 / - Altera Corporation announced today that Tokyo-based NEC System Platforms Research Laboratories has selected Altera's transceiver-based StratixÃ-® II GX FPGAs and NiosÃ-® II embedded processor for implementing its new high-speed ExpEther interface. ExpEther is...
Read More »OpVista and Force10 Networks to Demonstrate Advanced GbE Distribution and Delivery for Operators at NXTcomm
OpVista's New 'EtherWave' Solution and the Force10 S25P High Performance GbE/10 GbE Access Switch Showcase How to Lower the Cost of GbE Distribution and Delivery CHICAGO, June 18 - OpVista and Force10 Networks-® today announced that the companies will conduct a network simulation at NXTcomm in Chicago (in OpVista's booth, 7415) demonstrating how carriers can cost-effectively distribute GbE...
Read More »
Vibration Limit Switch is designed for bulk solids industry.
Offering plug-and-play commissioning, Vibracon LVL-B Series has solid-state design that contributes to maintenance-free level sensing of fine or coarse-grained bulk solids materials. It requires no calibration and is insensitive to material build-up, external vibration, and flow noise. Each product features 10 in. vibrating rod, and extension pipes are available in 20, 40, and 60 in. sizes....
Read More »
SEALTITE® Fittings and Cord Grips Offer Longer Lasting Protection
Anamet Electrical's 316 Stainless steel SEALTITE® fittings and UL-listed cord grips protect sensitive wiring components from fluids, corrosive contaminations, bumps, and abrasions with a steel core and liquid tight conduit jacket. Check out this video to learn more.
Read More »
