Smoke and Fume Extractors

Fume Extractor features mobile design for occasional use.
Smoke and Fume Extractors

Fume Extractor features mobile design for occasional use.

Specifically designed for low amounts of dust, Smart Master features rotatable and swiveling exhaust hood that enables use in 360° radius. W3 approval make welding fume filter system suitable for welding chrome, nickel, and steel. Instead of exhaust arm, SmartMaster can also be connected by hose below welding table, so that suction of smoke particles is carried out directly at source....

Read More »
Fume Extraction System captures fumes up to 5 ft away.
Smoke and Fume Extractors

Fume Extraction System captures fumes up to 5 ft away.

Featuring ZoneFlow technology, FILTAIR® Capture 5 provides capture area up to 4 ft wide and 5 ft deep. Air enters arm at standard fume capture rate of 900 cfm, whileÂ- technology moves clean, filtered air out of arm at 90° angle, creating negative pressure zone which funnels particulates toward center of arm to maximize fume capture. Rated 15–16 on MERV scale, FilTek XL filters...

Read More »
Overhead Hood Ventilation System removes fumes, heat at source.
Smoke and Fume Extractors

Overhead Hood Ventilation System removes fumes, heat at source.

Available in 27, 32, and 37 in. hood diameters and with 250 or 450 cfm exhaust blowers, table-top Vent-A-Fume systems capture toxic fumes and heat immediately at their source. Single-speed motor for cooler running and more efficient operation, and support stand facilitates installation as well as height adjustments of overhead hood. Standard hoods are fabricated from .063 gauge aluminum;...

Read More »
New Dust Collector Hoppers Fit Low-Profile Applications
Smoke and Fume Extractors

New Dust Collector Hoppers Fit Low-Profile Applications

Low Pro hopper Jonesboro, Ark. - Camfil APC has introduced two new dust collector hoppers for use where space constraints dictate the use of a low-profile dust collection system. Designed to fit Farr Gold Series® cartridge dust collectors, the Low Pro hopper is best suited to collection of dust and fumes from cutting, blasting, welding and thermal spray operations; while the Low Boy hopper...

Read More »
OK International to Exhibit at SMTA International 2012
Smoke and Fume Extractors

OK International to Exhibit at SMTA International 2012

GARDEN GROVE, CA - OK International, a leading global supplier of soldering tools and equipment for production assembly, announces it will exhibit in booth #617 at the upcoming SMTA International Conference and Expo, scheduled to take place Tuesday October 16 and Wednesday, October 17, 2012 from 9 a.m.-5 p.m. at the Walt Disney World Dolphin Hotel in Orlando, FL. Highlighted at the show will be...

Read More »
Recondition Older Exhaust Removal Systems
Smoke and Fume Extractors

Recondition Older Exhaust Removal Systems

Is your exhaust removal system 100% effective in protecting firefighters from breathing exhaust gases and soot in the firehouse? MagneGrip Group can repair and upgrade older exhaust removal systems--including those made by other manufacturers. If parts of your system are still functional (such as the overhead tracks and ductwork), MagneGrip can convert the remainder of the system at a fraction of...

Read More »
Smoke and Fume Extractors

Weld Fume Extractors range from 2,000-12,000 cfm.

Available in 5 models, FILTAIR Industrial Centralized Weld Fume Extraction Series is customizable to variety of welding cells and applications. Units combine TruLock(TM) Filter technology with MERV 15 nanofiber filter pack to capture up to 95% of particles ranging from 0.2 to 1 micron. TruLock technology uses surface webbing of small fibers to capture weld fumes on surface. To extend filter pack...

Read More »
Welding Fume Extractor enhances workplace safety.
Smoke and Fume Extractors

Welding Fume Extractor enhances workplace safety.

Manufactured on casters for mobility, Fanquip welding fume extractor filters and clears air of highly toxic and potentially carcinogenic fumes down to 0.3 micron. It features 2-stage filtration as well as onboard filter monitor and can be supplied with 2, 3, or 4 m arms, which measure 150 or 200 mm in diameter. Product can also be used in food sector as general air cleaner for dust.

Read More »
OK International Will Showcase Assembly and Rework Technology Advances at Nepcon China 2011
Smoke and Fume Extractors

OK International Will Showcase Assembly and Rework Technology Advances at Nepcon China 2011

The OK International team will display and demonstrate its full range of soldering and production assembly technologies at this year's Nepcon China in Shanghai, May 11 - 13. These industry-leading solutions will be fully operational at booth #1F10, including advanced soldering, desoldering and rework systems, programmable pre-heaters, fume extraction and a comprehensive range of dispensing...

Read More »
Smoke and Fume Extractors

Advanced OK International Technologies on Show at SMT Germany 2011

OK International will be showcasing a wide range of advanced technologies for production assembly at this year's SMT Germany exhibition, being held from May 3rd - 5th in Nuremberg, Germany. Represented on Weidinger stand 101 in Hall 6, OK International products on show will include advanced soldering, desoldering and rework systems - to name a few! Taking centre stage on the Weidinger stand, OK...

Read More »

All Topics