New Dumper-Conveyor System Allows Dust-free Dumping of Bulk Solid Materials
TIP-TITE Drum Dumper accommodates drums from 30 to 55 gal weighing up to 750 lb and measuring 36 to 48 in. in height. Raises the drum hydraulically to form a dust-tight seal between the rim of a drum and the underside of the discharge cone. FLEXICON Screw Conveyor feeds material to elevated process equipment and storage vessels.
Read More »
Flexicon Introduces Screw Conveyor Featuring Integral Bin and Caster-Mounted Frame
Flexible Screw Conveyor comes with “push type” and “pull type” drive systems positioned at lower intake end and upper discharge end of the conveyor respectively. Unit features a 9 cu-ft integral bin that can accommodate one third of the contents of bag measuring 3 x 3 x 3 ft. The conveyor’s tube consists of BEV-CON™ screw that allows the movement of difficult-to-convey bulk materials....
Read More »
Mobile Flexible Screw Conveyor features dust hood.
Mobile Flexible Screw Conveyor is equipped with multi-purpose hood. Unit is mounted on a frame using locking casters and comes with bulk bag spout, bag support tray and hinged door. Product is used to transfer material discharged from bulk bags and manually dumped from handheld sacks into elevated process equipment. This screw conveyor is suitable for handling free- and non-free-flowing bulk...
Read More »
Screw Conveyor comes with trough hopper with stainless steel grate.
Able to receive material from multiple outlets of feeders and blenders, Screw Conveyor’s hopper comes with 1143 mm length charging adapter. Featuring U-shaped trough, unit comes with crevice-free surfaces. Designed for handling free- and non-free flowing materials, conveyor’s moving inner screw provides clearance between screw and tube wall.
Read More »
The Benefits of Safety Grating Over Similar Options
In this eBook, discussed are the factors to consider when choosing the right safety grating for your application and details about the varieties offered by Metalex.
Read More »
Sanitary Flexible Screw Conveyor features manual and automatic speed adjustment.
Designed with caster-mounted frame, support boom and hopper grate, Sanitary Flexible Screw Conveyor can transport bulk materials from sub-micron powders to large pellets. Featuring quick-release clean out cap, quick-disconnect discharge box access cover and stainless control panel, conveyor can roll through doorways of 2134 mm low height and aisles as narrow as 1067 mm. Conveyor frame is...
Read More »
Flexible Screw Conveyor transfers material from front end loaders.
Featuring purpose-built, heavy-gauge stainless steel hopper that holds up to 8 tons or 200 ftÂ-³, Flexicon® extreme-duty flexible screw conveyor transfers material with bulk densities up to 150 lb/ft³. Stainless steel screw rotates within 8 in. dia stainless steel tube. Driven at top end by 20 hp variable-speed electric motor and gear reducer, conveyor...
Read More »
Product Orientation "Upenders" Both Helix and Arm Upender Conveying Device Solutions
Winneconne, WI - Multi-Conveyor (www.multi-conveyor.com)- The Helix Upender, also known as a twist" style conveyor, is typically used to change product orientation by either 90 or 180 degrees, either clockwise or counter-clockwise, to facilitate ink-jet printing, labeling, case packing or even hand pack operations. Constructed with two (2) Table Top chains set at 90 degrees to each other,...
Read More »VAC-U-MAX Exhibits Ready-to-Operate Processing and Packaging Solutions for Powder and Bulk Ingredient Handling at Pack Expo 2015, September 28-30, Las Vegas Convention Center, Las Vegas, NV, Booth S-7422
BELLEVILLE, NJ USAÂ- – VAC-U-MAX announces exhibition at Pack Expo 2015, September 28-30, Las Vegas Convention Center, Las Vegas, Nevada, Booth S-7422, exhibiting ready-to-operate processing and packaging solutions for powder and bulk ingredient transfer in the food, pharmaceutical, and chemical industries. Specializing in the design, manufacture, engineering, and automation of processes,...
Read More »VAC-U-MAX Exhibits Process Automation Systems and Solutions for Bulk Materials Handling Within the Food Industry at Process Expo 2015, September 15-18, McCormick Center, Chicago, Illinois, Booth 6710
BELLEVILLE, NJ USAÂ- – VAC-U-MAX announces exhibition at Process Expo 2015, September 15-18, McCormick Center, Chicago, Illinois, Booth 6710, exhibiting the latest powder and bulk ingredient handling technologies for the food industry. Equipment on display includes continuous bulk material transfer systems incorporating sanitary receivers designed to convey powders, milk powder, flakes,...
Read More »
Septage Receiving System offers automated rock removal.
With SPIRALIFT® SR Septage Receiving System, TASKMASTER TT grinder uses trap system to settle out rocks with high level of efficiency. Automated rock removal option has automated gate valve that opens on pre-planned cycle and letsÂ- rocks fall into enclosed screw conveyor. They are then conveyed directly into bin for disposal without operator assistance. System is preferred by plants...
Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.
Read More »
