Screw Conveyors

New Model 1450 Flexible Screw Conveyor is Available with UL-Listed Start-Stop Control Panel
Screw Conveyors

New Model 1450 Flexible Screw Conveyor is Available with UL-Listed Start-Stop Control Panel

Comes with 4-1/2 in. (114 mm.) O.D. polymer conveyor tube, carbon steel floor hopper and discharge housing. Offers conveyor tube that prevents product and plant contamination, while the gentle rolling action imparted by the screw prevents the separation of blends. Lower end of the screw requires no bearing, while the upper end is driven beyond the point of discharge, preventing material contact...

Read More »
Flexicon Introduces Screw Conveyor Featuring Integral Bin and Caster-Mounted Frame
Screw Conveyors

Flexicon Introduces Screw Conveyor Featuring Integral Bin and Caster-Mounted Frame

Flexible Screw Conveyor comes with “push type” and “pull type” drive systems positioned at lower intake end and upper discharge end of the conveyor respectively. Unit features a 9 cu-ft integral bin that can accommodate one third of the contents of bag measuring 3 x 3 x 3 ft. The conveyor’s tube consists of BEV-CON™ screw that allows the movement of difficult-to-convey bulk materials....

Read More »
Mobile Flexible Screw Conveyor features dust hood.
Screw Conveyors

Mobile Flexible Screw Conveyor features dust hood.

Mobile Flexible Screw Conveyor is equipped with multi-purpose hood. Unit is mounted on a frame using locking casters and comes with bulk bag spout, bag support tray and hinged door. Product is used to transfer material discharged from bulk bags and manually dumped from handheld sacks into elevated process equipment. This screw conveyor is suitable for handling free- and non-free-flowing bulk...

Read More »
Seal Stuff In, Seal Stuff Out
Sponsored

Seal Stuff In, Seal Stuff Out

One of the best ways to make sure that your machinery stays up and running in the face of adversity is to make sure that it's properly sealed. Of course, it's not always easy to determine whether the integrity of your seals are up to par. How can you tell when you have a problem?

Read More »
Sanitary Flexible Screw Conveyor features manual and automatic speed adjustment.
Screw Conveyors

Sanitary Flexible Screw Conveyor features manual and automatic speed adjustment.

Designed with caster-mounted frame, support boom and hopper grate, Sanitary Flexible Screw Conveyor can transport bulk materials from sub-micron powders to large pellets. Featuring quick-release clean out cap, quick-disconnect discharge box access cover and stainless control panel, conveyor can roll through doorways of 2134 mm low height and aisles as narrow as 1067 mm. Conveyor frame is...

Read More »
Flexible Screw Conveyor transfers material from front end loaders.
Screw Conveyors

Flexible Screw Conveyor transfers material from front end loaders.

Featuring purpose-built, heavy-gauge stainless steel hopper that holds up to 8 tons or 200 ftÂ-³, Flexicon® extreme-duty flexible screw conveyor transfers material with bulk densities up to 150 lb/ft³. Stainless steel screw rotates within 8 in. dia stainless steel tube. Driven at top end by 20 hp variable-speed electric motor and gear reducer, conveyor...

Read More »
Product Orientation "Upenders" Both Helix and Arm Upender Conveying Device Solutions
Screw Conveyors

Product Orientation "Upenders" Both Helix and Arm Upender Conveying Device Solutions

Winneconne, WI - Multi-Conveyor (www.multi-conveyor.com)- The Helix Upender, also known as a twist" style conveyor, is typically used to change product orientation by either 90 or 180 degrees, either clockwise or counter-clockwise, to facilitate ink-jet printing, labeling, case packing or even hand pack operations. Constructed with two (2) Table Top chains set at 90 degrees to each other,...

Read More »
Screw Conveyors

VAC-U-MAX Exhibits Ready-to-Operate Processing and Packaging Solutions for Powder and Bulk Ingredient Handling at Pack Expo 2015, September 28-30, Las Vegas Convention Center, Las Vegas, NV, Booth S-7422

BELLEVILLE, NJ USAÂ-  – VAC-U-MAX announces exhibition at Pack Expo 2015, September 28-30, Las Vegas Convention Center, Las Vegas, Nevada, Booth S-7422, exhibiting ready-to-operate processing and packaging solutions for powder and bulk ingredient transfer in the food, pharmaceutical, and chemical industries. Specializing in the design, manufacture, engineering, and automation of processes,...

Read More »
Screw Conveyors

VAC-U-MAX Exhibits Process Automation Systems and Solutions for Bulk Materials Handling Within the Food Industry at Process Expo 2015, September 15-18, McCormick Center, Chicago, Illinois, Booth 6710

BELLEVILLE, NJ USAÂ- – VAC-U-MAX announces exhibition at Process Expo 2015, September 15-18, McCormick Center, Chicago, Illinois, Booth 6710, exhibiting the latest powder and bulk ingredient handling technologies for the food industry. Equipment on display includes continuous bulk material transfer systems incorporating sanitary receivers designed to convey powders, milk powder, flakes,...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers