Rotary Positioning Stages / Tables

Rotary Positioning Stages / Tables

Rotary Table offers stepper and servo motor options.

Providing load capacity of 180 kg when mounted horizontally and 40 kg when mounted vertically, cast aluminum Rotary Table 2 delivers final output reduction ratios of 1:6, 1:18, 1:54, and 1:162 by connecting 1:3 belt reduction module. Table is available with 306 oz-in stepper motor or 330 W servo motor. Options include 490 mm dia flat milled aluminum attachment disk, 200 mm T-slotted attachment...

Read More »
Rotary Systems feature direct-drive design.
Rotary Positioning Stages / Tables

Rotary Systems feature direct-drive design.

With no gearboxes or worm gear drives, Super-Precision® Rotary Systems produce accurate bidirectional response with .01 arc/sec repeatability and zero backlash. Featuring pneumatic collet closer with dual cylinder that delivers 4,560 lb adjustable draw bar pull, A2-5 16C is suited for precision machining or jig grinding applications. System A2-4 5C provides indexing speed of...

Read More »
Electronic Indexer is fully programmable.
Rotary Positioning Stages / Tables

Electronic Indexer is fully programmable.

Rotary Indexer Product Set offers direct drive solution that requires no maintenance over entire system life. With repeatability to ±1.2 arc-sec with no backlash and system accuracy to ±26 arc-sec, compact system. can be programmed to go in any direction, at any speed, at any angle. Index times are also programmable, and no homing is ever required; absolute position feedback maintains...

Read More »
Infinite Positioning Indexer offers ergonomic operation.
Rotary Positioning Stages / Tables

Infinite Positioning Indexer offers ergonomic operation.

Greased for life to provide zero-maintenance positioning solution, RS-320A has low-profile design (14 in. from floor to mounting surface) and incorporates near-zero backlash gearbox with right angle motor mounting. System features cast iron base, unbalanced load support capability, and no pre-set stops. Thrust capacity is 11,000 lb, positioning accuracy is .0025 in. at 3 ft radius, and E-stop...

Read More »
Rotary Positioning Stages / Tables

Centricity Corporation Introduces NETWORKING within the MS Series Line of Low-Cost, High-Precision Programmable Indexers

GIRARD, OH - Centricity Corporation, in Girard, Ohio, announces network capability within its line of high precision programmable indexers. Now all the parameters and features of the popular MS Series Indexer can be accessed over the network, allowing your PLC to store multiple indexer configurations. So if one job is a 6-stop indexer moving clockwise, and another job is an 11-stop indexer moving...

Read More »
Rotary Positioning Stages / Tables

Parts Handling System makes stacks of different components.

Utilizing Feedscape(TM) I.D. feeding technology in conjunction with MS Series(TM) Indexer, VERSA-STACK lets users create stacks of various sub-assemblies. Feedscape isolates and feeds each component directly from bowl feeder or spring feeder, and guides them on series of indexing pins positioned on outer edge of indexer dial plate. Once stack is complete, escapement deposits stack to final...

Read More »
Rotary Stages provide 45-300 rpm continuous rotation.
Rotary Positioning Stages / Tables

Rotary Stages provide 45-300 rpm continuous rotation.

Available in 100, 150, 200, 250, and 325 mm aperture sizes, ALAR Rotary Stages provide angular positioning and velocity control with axial load capacity of 300-1,000 lb. Stages are 65-160 mm tall and deliver smooth motion without travel restrictions. They utilize brushless, slotless motors with zero cogging and no torque ripple. Performance is assured with encoder line counts from 31,000-74,000...

Read More »
Rotary Positioning Stages / Tables

Horizontal Boring Mills with Five Axis and Multi-Tasking Capabilities

Chicago, IL, September 6, 2006 - First introduced at the end of 2004, the new generation of Giddings & Lewis horizontal boring mills quickly became the fastest selling G&L product with more than 60 sold since their introduction. At IMTS 2006 Giddings & Lewis displays a rotary table boring mill, the RT 1250, with five-axis and multi-tasking capabilities. Fifth Axis Table-On-Table An optional...

Read More »
Rotary Tilt Table suits high production applications.
Rotary Positioning Stages / Tables

Rotary Tilt Table suits high production applications.

Featuring 105 mm diameter table and max workload of 15 kg per spindle, multi-spindle Model 5AX-2MT provides rotational speed of 22.2 rpm and tilting rotational speed of 11.1 rpm. Both rotary and tilting axes can be controlled by machine's CNC control or via independent controllers. Included braking system produces 147 Nm clamping torque. Options are available to meet workholding, fixturing, and...

Read More »
New: Tsudakoma Rotary Tables to be introduced at IMTS...
Rotary Positioning Stages / Tables

New: Tsudakoma Rotary Tables to be introduced at IMTS...

The Tsudakoma TN-130 super compact NC tilting rotary table features massive clamp torque utilizing a newly designed dual disc tapered ball clamping system. The TN-130 is a high speed table with total flexibility for the addition of rotary joints, scales, and hydraulic chucks. The Tsudakoma RNA Series rotary tables also utilize the newly designed dual disc tapered ball clamping system resulting in...

Read More »
Locon Sensors Withstand Extreme Temperatures
Sponsored

Locon Sensors Withstand Extreme Temperatures

Locon Sensor Systems offer robust sensor solutions for even the most severe environmental conditions. Their line of high-temp inductive sensors and their cylindrical photoelectric series can operate in temperatures up to 250 degrees Celsius. See our video to learn more.

Read More »

All Topics