Bi-Directional Encoder offers resolutions from 1 to 10,000.
Accu-Coder(TM) Cube Series Model 715 operates in one of 2 modes. In first mode, Model 715-1 provides constant pulse width output on one output channel for clockwise shaft rotation, and on another channel for counter clockwise rotation. In second mode, Model 715-2 provides constant pulse width output on one channel, regardless of direction of shaft rotation. Pulse width is programmable from 10...
Read More »Rotary Optical Encoder has brushless commutation outputs.
Available with resolutions up to 2048 lines, model RCM15, 1.5 in. dia rotary optical encoder combines brushless motor commutation pulses and incremental position feedback. Offerings include company's slide/gap mechanism and one LED. Built-in servo groove allows Ã-
Read More »Multi-Turn Rotary Encoder features 36-bit resolution.
Dignalizer absolute optical rotary encoder measures 262,144 pulses per revolution over 262,144 revolutions, allowing it to track over 68 billion pulses with binary codes. Internal monitoring electronics decrease output lag, allowing for accurate monitoring of rotary process as fast as 6,000 rpm. Dignalizer supports major bus system outputs, as well as RS-485 outputs. It features IP64 sealing and...
Read More »Optical Shaft Encoder is suitable for harsh environments.
Superseal encoder, built on Model 725 Size 25 Optical Shaft Encoder platform, adds double o-rings to case seal and 2 TeflonÃ-® seals to bearing assembly. Double case, within sealed encoder design, provides protection for critical components. Additional sealing around cable ports and connector options such as Turck EurofastÃ-® are included. Unit withstands caustic, fine dust, and saline...
Read More »5 Unique Applications for Surface Treatment Equipment eBook
The surface requirements and restrictions for components may vary from one industry to another. For this reason, components may have to undergo different types of surface treatments.
Read More »Thru-Bore Encoder replaces tachometers.
Accu-Coder(TM) Model 225 can be used in applications that previously incorporated tachometers and similar devices. It is available in bore sizes up to 7/8 in., and comes with variety of connector options, including the Turck Eurofast(R), and with encoder electronics.
Read More »Hollow Bore Encoder accepts large shaft sizes.
Model 755A Round Series Accu-Coder(TM) is available in extended bore sizes up to 0.750 in., allowing it to be mounted on motors with large shafts. Encoder is industry standard size 15 (1.5 in. dia) and offers resolutions up to 30,000 cycles per revolution. Sensing technology assures accuracy and reliability.
Read More »Optical Encoders suit tight package constraint applications.
MOD 700 Series incremental rotary encoders are comprised of LED and OptoASIC in 17.7 x 9.6 x 8.89 mm package. They offer resolutions as high as 2,540 ppr. OptoASIC provides +/- 0.010 in. tolerance for axial movement, 40 mA power consumption, and operating temperature of 0 to 85 deg C. Stainless steel code disk features range of standard optical radii, from .375 to .860 in., and can accommodate...
Read More »Rotary Encoder suits tight constraint applications.
MOD 700 is comprised of LED and OptoASIC configured into small caliper, offering resolutions as high as 2,540 PPR. Opto-ASIC phased array photo diode IC features high tolerance for axial movement (+/- 0.010 in.) and power consumption of 40 mA. Standard stainless steel code disk offers range of standard optical radii, from .375 to .860 in. MOD 700 can be surface mounted onto PCBs or installed onto...
Read More »Measuring Wheels work with encoders to measure linear motion.
Measuring Wheels are available in 6 in., 12 in., 1/3 meter, 200mm, 300mm, 400mm, and 500mm with choice of rubber or knurled aluminum contact surfaces. Cube Series Accu-Coder(TM) encoders with dual shafts work well in measuring wheel applications, since putting measuring wheel on each shaft results in twice the traction and improves bearing load by leveling radial pressure.
Read More »Modular Encoder requires no calibration.
Accu-Coder(TM) Model 121 Self-Centering Modular Encoder has all-metal construction that will not warp or deflect. It requires no gapping or special tools to install. User simply tightens shaft clamp and installs mounting screws. Model 121 is available with up to 12-pole commutation, or with extended temperature range up to 100 deg C.
Read More »SpillVak Absorbs Up to 6X More Fluid Than Rock- and Clay-based Absorbents
Are you struggling to find an absorbent that doesn't result in at least some leaching? SpillVak outperforms all rock and clay-based materials. Check out our video to learn more.
Read More »