Resistor Networks

Resistor Networks

Dynamic Braking Resistors meet UL and CSA standards.

Designed to meet UL508A and CSA C22.2 No. 14 safety standards, Dynamic Braking Resistors work in concert with company’s Dynamic Braking Units to dissipate regenerative energy generated from motors controlled by IMPULSE® brand variable frequency drives. Units are designed specifically for crane and hoist duty cycles and are available in grid, wire wound, or edge wound resistor coils...

Read More »
Resistor Networks

Precision Resistor Network Devices suit applications to +230°C.

Based on Z1-Foil technology, PRND HT Series provides load-life stability to ±0.03% typical at +200°C for 2,000 hr at derated power and long-term, high-temperature exposure to ±0.03% typical at +230°C for 1,000 hr at zero power. Offered in dual-in-line, flatpack, gull wing, and leadless chip carrier configurations, hermetically sealed devices feature wide resistance range...

Read More »
Resistor Networks

Thin Film Resistor Networks come in 14 or 16-pin SOIC packages.

NOMCA series of dual-in-line thin film resistor networks features low absolute TCR of ±25 ppm/°C, TCR tracking of 5 ppm/°C, ratio tolerances to ±0.05%, and long-term ratio stability of 0.05% after 1,000 hours at +125Â-ºC. For improved ESD and moisture protection, resistor networks are constructed with self-passivating tantalum nitride resistor film on high-purity...

Read More »
Resistor Networks

SMT Resistor Networks feature 5 x 5 x 1 mm package.

Quad-precision, thin film SMT resistor networks in QFN series are contained in 20-pin no-lead package with 0.65 mm pitch. They offer tolerances to ±0.05% and stable film and performance characteristics of 500 ppm at +70°C for 2,000 hr. Resistance values can be different for each resistor in networks and range from 100 W/resistor to 500 kW/package. Operating in temperatures from -55 to...

Read More »
Resistor Networks and Dividers come in thin film SMT format.
Resistor Networks

Resistor Networks and Dividers come in thin film SMT format.

Supplied in 4 x 4 mm DFN package with 0.65 mm pitch and 1 mm profile, precision thin film SMT resistor networks and dividers offer ratio tolerances to ±0.05% and stable film and performance characteristics of 500 ppm at +70°C for 2,000 hr. Respective TCR tracking is ±3 ppm and ±5 ppm, and power rating is 50 mW at +70°C per resistor. While DFN resistor networks offer...

Read More »
4-Resistor Network is hermetically sealed.
Resistor Networks

4-Resistor Network is hermetically sealed.

Combining 4 independent Bulk Metal® Foil resistors in one 8-pin, SMT, ceramic gull wing package, SMNH resistor network features load life stability of 0.005% at 0.1 W/resistor at +70°C for 1,000 hr and load life stability ratio of 0.005%. Shelf-life stability per resistor is 0.0002%, and shelf life stability ratio is 0.0001% for at least 6 years. Immune to ESD up to 25 kV,...

Read More »
Bulk Metal Z-Foil SMT Resistor Networks come in BGA format.
Resistor Networks

Bulk Metal Z-Foil SMT Resistor Networks come in BGA format.

Comprised of 2-resistor VFB1012D voltage divider, 3-resistor VFB1515N, and 4-resistor VFB2028N, Bulk Metal® Z-Foil SMT resistor networks provide absolute TCR of ±0.05 ppm/°C from 0-60°C and ±0.2 ppm/°C from -55°C to +125°C, +25°C Ref. Characteristics include PCR tracking of ± 5 ppm at rated power and load life stability ratio of...

Read More »
Power Resistor Networks offer 2-sided design option.
Resistor Networks

Power Resistor Networks offer 2-sided design option.

Comprised of thick film resistors on ceramic base, Series 143-XXX offers completely customizable resistor values, power, size, and pinout. Power Resistor Networks feature matching resistors in SIP lead configuration, with total available power rating up to 10 W and tolerance of 1%. They are designed specifically for power line testers and attenuators, high voltage test equipment, motor drivers...

Read More »
Thin Film Resistor Networks come in small outline packages.
Resistor Networks

Thin Film Resistor Networks come in small outline packages.

Housed in surface mount SON packages, SFN Series comes in custom, isolated, bussed, and voltage divider circuit configurations. Units are offered in 6-pad, 2 mmÂ-² outline with 0.65 mm pad pitch as well as 8-pad, 4 mm² outline with 0.8 mm pad pitch. Available with 2, 4, or 7 resistors, standard networks feature nominal resistance ranges from 10 W to 100 KW with absolute tolerance to...

Read More »
Thin Film Resistor Networks are hermetically sealed.
Resistor Networks

Thin Film Resistor Networks are hermetically sealed.

Offered in through hole DIP and surface mount packages, thin film resistor networks feature resistance range from 10 to 1 M, with absolute tolerances to less than 0.05% and ratio tolerance to less than 0.01%. TCRs are less than 25 ppm/XC with TCR tracking to less than 5 ppm/XC. Available with hot solder dip, tin-lead plate, and gold plate finishes, units meet MIL-STD-883, MIL-STD-1835,...

Read More »
Precision Fabricating with Over 40 Years of Experience
Sponsored

Precision Fabricating with Over 40 Years of Experience

Quality Sheet Metal specializes in delivering precision, value, and customer service. With a client base that spans many diverse industries and a reputation for excellence that goes back over four decades, our clients know that we can provide the optimal combination of value and flexibility regardless of the challenge. See our video to learn what we can do for you. Through investments in state-of-the-art design, manufacturing, and quality control systems, Quality Sheet Metal remains focused on maintaining a high standard of quality, customer service, and competitive pricing. With an emphasis on customer satisfaction, Quality Sheet Metal is dedicated to establishing long-term partnerships, similar to the ones they currently have with their valued clients. If you're looking for a new partner with extensive capabilities in sheet metal fabricating and finishing, look no further.

Read More »

All Topics