New Receivers Products

Cattron, a Unit of Laird Technologies, to Attend CeMAT Hannover 2011 Trade Show

Cattron, a Unit of Laird Technologies, to Attend CeMAT Hannover 2011 Trade Show Company to Focus on Remote Control Solutions for Material Handling and Industrial Market Segments St. Louis, Missouri, USA - Laird Technologies, Inc., a global leader in the design and supply of customized performance-critical components and systems for advanced electronics and wireless products, today announced it...

GLONASS/GPS Receiver features 29 sec cold start TTFF.

Measuring 25 x 25 mm, GLONASS/GPS Receiver can be used as drop-in replacement to upgrade existing GPS product. Unit features 145 dBm cold starting and -159 dBm navigation sensitivity. Receiver is capable of operating in 12 tracking channel GPS-only mode, 12 tracking channel GLONASS-only mode, and 24 tracking channel GLONASS + GPS mode. Combining multipath detection and mitigation algorithm,...

EMI Receiver optimizes compliance testing.

Serving as EMI receiver and signal analyzer, Model N9038A MXE is designed for laboratories that perform compliance testing of electrical and electronic products. Unit features displayed average noise level of -163 dBm at 1 GHz and measurement accuracy of Ã-

Alcatel-Lucent Bell Labs Showcases Next-Generation Optical Transmission Technologies at Annual Optical Fiber Communication Conference

Novel research solutions address industry's most pressing challenges PARIS -- Alcatel-Lucent (Euronext Paris and NYSE: ALU) today announced that scientists from its research arm, Bell Labs, have demonstrated a range of optical technology advances at the optical industry's annual Optical Fiber Communication Conference and Exposition (OFC) and National Fiber Optic Engineers Conference (NFOEC) in...

Responsible Spill Remediation in the Food & Beverage Industry

There are two major areas in which food & beverage product handling will take place: processing and distribution. As with all product handling scenarios, spills are an inevitable occurrence within both of these spaces.

Fiber Receiver carries HDMI signals up to 1,000 ft.

Accepting all analog and uncompressed HD A/V signals, control, data, and Ethernet from single multimode fiber strand, DM-RMC-150-S DigitalMedia 8G(TM) Fiber Receiver and Room Controller outputs standard HDMI to display device. Unit includes RS232, IR, and Ethernet ports as well as relays, closure sensing, and USB ports for additional control options. Additionally, Model DM-RMC-150-S provides...

Transmitter/Receiver Pair extends HDMI 1,000 ft over fiber.

Supporting HDMI 1.3a with deep color and 7.1 channel lossless audio, HD-TX3-F and HD-RX3-F transmitter/receiver pair extend uncompressed HDMI, analog audio, Ethernet, USB HID, and control signals up to 1,000 ft over single multimode fiber. Units manage EDID and HDCP, handle resolutions up to 1920 x 1200 and 1080p60, and are compatible with DVI and DisplayPort Multimode. Devices are housed in...

GNSS Receiver Module speeds OEM application development.

TrimbleÃ-® BD982 RTK GNSS receiver for guidance and control applications can receive GPS L1/L2/L5 and GLONASS L1/L2 signals and more. Single-board system is based on pair of 220-channel Maxwell 6 chips which offer dual antenna inputs and calculation of multiple GNSS RTK baselines. Unit provides on-board multipath migration, low-elevation tracking technology, and fast RTK initialization....

K-Tron Process Group to Introduce New Material Flow Aid, New Controls, and New K-Tron Premier Receiver Design, at PTXi 2010, May 4-6, 2010, Donald E. Stephens Convention Center, Rosemont, Illinois, Booth 1413

PITMAN, NJ - K-Tron Process Group will exhibit several new additions to the K-Tron Feeder and K-Tron Premier product line at PTXi 2010 (Powder and Bulk Solids Show), May 4-6, 2010, at the Donald E. Stephens Convention Center, Rosemont, Illinois, Booth 1413. For more information and online booth preview, visit www.ktron.com/PTXi. The K-Tron booth will feature the following powder and bulk...

Digital EMI Receiver/Analyzer suits small- to mid-sized labs.

Featuring frequency measurement range of 10 Hz up to 3 GHz, PMM 9010/30P utilizes digital signal processing as well as calibration-free CISPR detectors and IF and RBW filters. It has CISPR 16 detectors including RMS-AVG, C-AVG, and APD, as well as Peak, Quasi-Peak, and AVG detectors. Internal RF signal generator works in tracking mode up to frequency of 30 MHz, allowing device to be used as...

Coherent Receiver targets 100G optical communications market.

Model CR-100A compact coherent receiver is available in configuration that includes internal polarizing beam splitter, and one without. Compact form-factor compliant product supports four 32 Gbaud outputs and covers both C and L bands. It also incorporates optical beam splitters, mixers, high-speed photodiode arrays, and amplifier arrays. Next generation 40G, 100G, and beyond line-side...

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.