The HydroTech - Hydraulic Replacement Unit
Hydraulic Power Units

The HydroTech - Hydraulic Replacement Unit

Kokusai introduces their latest product. The HYDROTECH is a revolutionary product that can replace your current, leaking, noisy, high maintenance, and expensive hydraulic system with a 100% self contained electro-servo actuation module. The HYDROTECH offers improvements in electric power consumption, using only 4% of the existing oil and removes all of the tripping hazards due to the connecting...

Read More »
Hydraulic Power Units

Load Sensing Hydraulic Power Unit for Tower Erection

Power generation by wind is being revolutionized using the Venturi effect to accelerate wind energy around a tower into specially designed turbines. Optiwind, a Connecticut company, has pioneered this new technology using a single tower with three foundation points anchoring the triangular section to its base. The tower is erected in one piece from horizontal to vertical using two of its...

Read More »
Hydraulic Power Units

Hydraulics Let the Force be with You!!

The Problem: How to tilt a 14 foot wide by 42 foot long platform containing a slab of cement weighing 60,000 pounds from a horizontal position to 80 degrees from the horizon in an arc with a distance of 93 inches. The platform and cement slab are on a mobile truck trailer, no electricity is available and space under the platform is limited to about 3 feet. The Solution: Provide a battery start,...

Read More »
Power Supplies

Auxiliary Power Unit extends range of electric vehicles.

Added to pure electric drive vehicles, modular Range Extender APU extends operational range beyond that obtainable in pure electric mode. Autonomous auxiliary power unit employs 250 cc rotary engine running at 5,000 rpm with permanent magnet synchronous machine. Electric output is 15 kW at 320-420 V, and fuel consumption is 260 g/kWh. System-to-vehicle interfaces include high- and low-voltage,...

Read More »
Considerations for Choosing a Plastic Injection Molder
Sponsored

Considerations for Choosing a Plastic Injection Molder

Choosing a plastic injection molder is no small decision. There are a number of factors that play into your selection, and it's important to consider them all to ensure you find the plastic injection molding company that suits your unique needs. This eBook is your guide to identifying those factors to help you make an informed decision.

Read More »
Hydraulic Power Units come in horizontal and vertical models.
Hydraulic Power Units

Hydraulic Power Units come in horizontal and vertical models.

Equipped with Leeson(TM) electric motors, Hydraulic Power Units utilize Daman(TM) D03 or D05 sub-plates with Sun(TM) relief, and Magnaloy(TM) D03 or D05 bar manifolds and pump mounts with flexible drive couplings. Stauff(TM) pressure gauges include shut-off valves, suction strainers, and return line filters with dirt indicator. Available with 5-30 gal reservoirs, units operate at 1-10 gpm with...

Read More »
Electrical Power Generators

Mobile Power Unit provides up to 34 megawatts.

Incorporating LM2500 aeroderivative gas turbine with Brush 170ER generator, Model TM2500+ achieves full power in less than 10 min with 41.1% efficiency and noise level of 88 dBa. It can be applied in 60 or 50 Hz applications and can operate on natural gas or liquid distillate fuels. Water injection can be used to achieve NOx levels down to 25 ppm. It is packaged on 2-trailer system with...

Read More »
Power Units

Honeywell's Most Fuel-Efficient Auxiliary Power Unit Selected by China Eastern Airlines for Their A320 Fleet

PHOENIX, Nov. 4, 2008 - Honeywell announced today that its newest fuel-saving Auxiliary Power Unit (APU) has been selected to provide air conditioning, main engine starting and electrical power for China Eastern Airlines' recent order of 30 Airbus A320 aircraft. Terms of the agreement were not disclosed. Honeywell also secured a maintenance agreement with China Eastern to service the APUs. This...

Read More »
Training System enables classroom fluid power simulations.
Hydraulic Power Units

Training System enables classroom fluid power simulations.

Accommodating up to 4 students, HTS-2 fluid power training simulator demonstrates aeration and cavitation and provides experience with various fluid power concepts. Dual-operator station unit features several valves, including lever-operated, 4-way, 3-position tandem center directional control valve; 2 cylinders; and spool valve motor. Central power unit, supplying 1 or both sides, offers total...

Read More »
Miscellaneous Controls

ADMET Provides Servo-Hydraulic Actuators - Controllers for Custom Materials Testing Machine Designs

Builds on ADMET's retrofits experience... NORWOOD, Mass. - Feb. 29, 2008 - ADMET Inc., a provider of integrated materials testing systems and retrofits, today announced that it now provides components for customers who want to build their own testing machines. The components, primarily servo-hydraulic actuators and power units, as well as digital controllers, enable laboratory and production...

Read More »
Aircraft Maintenance and Repair Services

Revima APU Repair Activity Increases Significantly in 2007 and Adds New Capabilities

WINDSOR LOCKS, Conn., Feb. 20 - Revima APU, a joint venture company between Hamilton Sundstrand, a subsidiary of United Technologies (NYSE:UTX), and EADS Sogerma, shipped a total of 696 Auxiliary Power Unit repairs in 2007, up from 516 in 2006. Revima APU also received three international certifications to repair a wide variety of Auxiliary Power Units (APUs), employed on the world's most- flown...

Read More »

All Topics