New Power Supplies Products

DC/DC Converters feature 4:1 input range.

Housed in half brick case measuring 2.3 x 2.4 x 0.55 in., 150 W Series HEW accommodates 12, 24, and 48 V nominal input voltage requirements and provides output voltages of 3.3, 5, 12, 15, and 24 Vdc. Modules are fully encapsulated with thermally conductive potting compound for performance in still air or limited airflow environment. Designed for PCB mount applications, converters include On/Off...

Power Supply offers 1-10 kV at 20 W with differential input.

Designed with hybrid topology of linear and switch mode power conversion, Model MPS20W features differential amplifier input for voltage programming signal to optimize immunity from external system noise. Alternatively, output voltage may be pre-set by internal potentiometer. Remote user interface is provided via 15-pin, D-type connector. Output voltage is arc- and short-circuit protected and...

DC/DC Converter includes boost and Schottky diodes.

Operating within VIN range of 3.6-34 V with transient protection to 36 V, Model LT3681 includes Burst ModeÃ-® operation to keep quiescent current under 50 Ã-µA, making unit suited for automotive applications. Internal switch, rated at 3.2 A, can deliver up to 2 A of continuous output current to voltages as low as 1.26 V. Housed in 3 x 4 mm DFN-10 package, step-down switching regulator...

Power Supply Kits are suited for security applications.

Pre-mounted in locking metal enclosure, Alarm Lock Power ALP-12V1A-KIT and ALP-12V3A-KIT are 12/24 V power supply kits that offer respective current rating of 1.5 and 3 A. Both turnkey, all-inclusive models exhibit RFI/EMI immunity and are supplied with surge/noise protection. Power supplies come with transformer and backup battery to facilitate installation.

The Ultimate Guide To Hydra Pneumatic and Servo Cylinders

This white paper provides a guide to hydra pneumatic and servo cylinders.

Inverters come in compact, contactor-style package.

Suited for fan, pump, conveyor, and other general-purpose applications, Series X200 includes safe stop feature that offers hardware-based emergency stop function compliant with EN standards. It also decelerates and stops motor using regenerative energy from load when ac supply power is lost. Other features include trip avoidance function, automatic energy saving function, built-in timing logic,...

Quarter Brick DC/DC Converters feature 4:1 input range.

Suiting industrial, medical, and telecom applications, UQQ family of converters supply 100 W of power. Offered in pin-compatible package measuring 2.22 x 1.46 x 0.43 in., converters install on PC boards with Ã-½ in. card spacing. Input ranges are 9-36 Vdc, 12 V and/or 24 VIN nominal, and 18-75 Vdc, 24 V and/or 48 VIN nominal. Available models include 3.3 V/25 A, 5 V/20 A, 12 V/8 A, 15 V/7 A,...

DC/DC Regulator features 2.3 mm profile.

Weighing 0.86 g, LTM4604 uModule(TM) regulator includes onboard controller, power switches, inductor, and bypass capacitors enclosed and protected in 9 x 15 mm LGA package. It operates from input supply range of 2.35-5.5 V, regulates an output voltage from 0.8-5 V, and achieves 93% efficiency when converting 3.3 V input to 2.5 V output at up to 4 A. Rated for operation from -40 to +85Ã-

Modular Power Supplies carry medical safety approvals.

Comprised of 4 platforms offering 300, 450, 650, or 900 W of power, ACE Series exhibits 80% operational efficiency and failure rate of 104 ppm for use in critical medical applications. Power can be configured with selection of 32 different single-/dual-output modules, with output voltages from 1.6-56 Vdc, to provide millions of possible configurations. Specified over -20 to +70Ã-

DC/DC Converter delivers up to 1.8 A continuous current.

Using constant frequency and current mode architecture, 4 MHz Model LTC3568 operates from input voltage of 2.5-5.5 V, making it suited for Li-Ion/Polymer battery inputs as well as 3.3 or 5 V inputs for point-of-load applications. Internal switches with RDS(ON) of 0.11 W enable efficiencies up to 96%. Housed in 3 x 3 mm DFN package, synchronous buck regulator uses Burst ModeÃ-® operation to...

Power Converters are made with RoHS compliant materials.

Series AMPL-UZ 10A and AMPL-UZ 16A non-isolated point-of-load converters offer efficiency rates up to 97%. Targeted to meet Intermediate Bus Architecture (IBA) applications requirements, both Series handle 5 V and 12 V input bus needs and have programmable output ranges of 0.75-5.0 V. Featuring no minimum load operation, remote output sense, and industry standard SMD footprint of 1.3 x 0.53 x...

ISO-Certified Plastic Injection Molding from Rodon

The Rodon Group is a proven leader in high-volume, close tolerance injection molding. We offer globally competitive, innovative manufacturing solutions for a broad range of industries. Check out our video to learn more.