POL DC/DC Converters power DDR memory applications.
Featuring small form factor with 1U height, 60 A Model VCN60BADJTU-1C and 70 A Model VCN70BADJTU-1C offer current density of 50 A/inÃ-³ and 88% efficiency at full load. With input voltage of 12 Vdc, units deliver programmable output from 0.6-3.5 Vdc with setpoint accuracy of 0.5%. Both include soft start circuit, differential remote sense, power good signal, pre-bias turn on, and output...
Read More »
Axiomatic Releases A 10 A (240 Watt) Version of the Rugged 24 Vdc-24 Vdc Converter
January 18, 2008 - Mississauga, Ontario, Canada Axiomatic releases a 10A (240 Watt) version of the rugged 24Vdc-24Vdc converter and the 48Vdc-24Vdc converter, part numbers AX080200 and AX080000. Axiomatic high-efficiency power converters are used in mobile, military and oilfield service equipment. All our DC/DC converters are designed for harsh operating environments. DC-DC converters provide...
Read More »High-Density Switcher supplies 160 W in 2 x 4 in. package.
Built with 1U form factor, VMS-160 series open frame switching power supplies can output 160 W with 200 LFM forced air cooling or 100 W under convection-cooled conditions. Products, approved to medical EN60601-1 and ITE EN60950-1 safety standards, operate from universal input (90-264 Vac) and provide single output voltages of 5/12/24/48 Vdc. Along with 18 W/inÃ-³ power density, series offers...
Read More »
Gate Driver IC includes ground fault protection.
Featuring extra channel for PFC switch or inverter brake, 3-phase Model IRS26302D is suited for medium power appliance motor control applications. Device integrates power MOSFET/IGBT gate drivers with 3 high-side and 3 low-side referenced output channels to provide 200/350 mA drive current at up to 20 V MOS gate drive capability, operating up to 600 V. Negative Vs immunity circuitry is...
Read More »
EMI/RFI Shielding Considerations for Electric Vehicles
This white paper provides an overview into EMI/RFI shielding considerations for electric vehicles.
Read More »
Step-Down DC/DC Converter targets automotive applications.
Housed in 3 x 3 mm DFN or MSOP package, 2 A Model LT1912 features input voltage range of 3.6-36 V, making it suited for load dump and cold-crank conditions found in automotive applications. Device's 3.2 A internal switch delivers up to 2 A of continuous output current to voltages as low as .079 V. Operating from -40 to 125Ã-
Read More »Boost Controllers support LED lighting and dc/dc conversion.
Used for powering large LED arrays, SP7606 can also be used for dc/dc conversion in boost, flyback, Cuk, and SEPIC configurations. Internally compensated 1.2 MHz boost controller is suitable for driving any number of topologies using low side switch. Output feedback disconnect eliminates leakage path from input source during shutdown so that shutdown current is less than 80 Ã-µA. Contained in...
Read More »National Instruments Joins Freescale, IBM and Xilinx in Power.org Collaboration
NI Delivers Technology Leadership and Graphical System Design to Power Architecture Technology Nov. 20, 2007 - National Instruments today announced it has joined Power.org, an open and collaborative organization dedicated to developing and promoting Power Architecture technology as the preferred open standard platform for the electronics industry. Power Architecture technology, an instruction set...
Read More »New Cummins Power Generation Rental Power Unit Is Designed for Power Projects in Hot, Dusty Environments
November 19, 2007 When a refinery in Zambia was unable to rely on the grid for power, they turned to Cummins Power Generation and created their own power plant using C1250 DR2 Rental Power units. Minneapolis, MN - Having electric power in remote locations far from the grid has been a challenge for companies operating in the Middle East and Africa. Furthermore, finding equipment that can operate...
Read More »Medical Power Supplies offer custom outputs.
Available in 200, 400, and 600 W with universal ac input, Xmite Series is safety qualified to UL60601-1/ EN60601-1 for medical applications. Units may be populated with up to 4 powerMod output modules offering dc outputs ranging from 1.5-58 Vdc. Combining low loss technologies with planar magnetics and surface mount technology, power supplies offer 90% efficiency, active PFC, and status and...
Read More »
Switching Mode Power Supplies suit homeland security uses.
Featuring single rack that provides 50 kW to 1 MW of output from 10-150 kV, Series HVPS replaces large 60 Hz transformer rectifiers, eliminates parallel connection of small power supplies, and can be located at point-of-load. Each solid-state unit has 30 in. sq footprint and uses tap water for cooling. Suited for large x-ray inspection systems, particle accelerators, and radar applications, units...
Read More »
ISO-Certified J&D Tube Benders Delivers Rapid Tubeline Fabrication Services
J&D Tube Benders' laser cutting and machining services provide accurate and complex features on tubes of all shapes and sizes. Check out the video to learn more!
Read More »
