Parts Washing Equipment

Ultrasonic Cleaning System offers closed loop recycling.
Parts Washing Equipment

Ultrasonic Cleaning System offers closed loop recycling.

AquaSonic® AQS-7500 combines PLC controlled, fully automatic ultrasonic stencil cleaning machine with wastewater recycling. All machine functions are controlled via an operator touch screen interface. Cleaning system has 2 tank design that utilizes ultrasonic wash tank and spray chamber. It uses integral pulse and sweep ultrasonic generation, 5 Â-µ wash tank filter, stainless steel...

Read More »
Cleaning Concentrate is used in ultrasonic tanks.
Parts Washing Equipment

Cleaning Concentrate is used in ultrasonic tanks.

Aqualar alkaline, water-based soluble detergent concentrate exhibits effective cleaning and wetting properties even when diluted with up to 10 parts water. It rinses completely, leaving no hard water stains. Solution is biodegradable and environmentally friendly. It can be used to remove waxes, greases, oils, and buffing compounds found on metals, glassware, and plastics. Aqualar is suitable for...

Read More »
Parts Cleaning System has basket rocking and full rotation.
Parts Washing Equipment

Parts Cleaning System has basket rocking and full rotation.

LeanClean(TM) 360 Cellular Basket Aqueous Parts Cleaning System provides variable-speed, multi-directional rocking of baskets containing parts to be cleaned. Parts can be rocked from 5° to 60° on each side of basket centerline. Unit incorporates complete immersion of components in conjunction with high pressure, submerged turbulation, and high volume spray in wash and rinse cycles....

Read More »
Parts Washer cleans complex, 6-sided components.
Parts Washing Equipment

Parts Washer cleans complex, 6-sided components.

U-Jet III, with triplex pump, produces water pressure to 1,015 psi and delivers flow rates to 13.00 gpm. With sonic velocities to 1,100 ft/sec, washer incorporates horn nozzle-design to create controlled cavitation in washing solution. Equipment includes 200 V, 3-phase, 60 Hz electrical system; 4-axis PLC-controlled robot; automatic tank filling system; 0.15 mm wire-mesh chip filter; and oil...

Read More »
Parts Cleaning System has ultrasonic cavitation.
Parts Washing Equipment

Parts Cleaning System has ultrasonic cavitation.

LeanClean(TM) 360 aqueous parts cleaner has omnidirectional Sonotube ultrasonic transducers that uniformly disperse ultrasonic cavitation into parts as basket rotates or articulates. Piezoelectric resonating transducers have 1,000 W output at 25 or 40 KHz frequency. System provides automated, variable speed wash/rinse and dry cycles for up to 10 standard or 20 small baskets per hour. Submerged...

Read More »
Carousel Wash System is adapted for de-oiling and chip removal.
Parts Washing Equipment

Carousel Wash System is adapted for de-oiling and chip removal.

Cell-Mate 200 is fitted with carousel return-to-front conveyor. It is built on rigid steel chassis with fork lift channels for relocation. Stainless steel fabrication of solution tank and process chambers provides resistance to corrosive, aqueous chemistries. High-impact, V-spray nozzles surround component in first process chamber, while second chamber utilizes multi-adjustable air knives that...

Read More »
Basket Washer accommodates high production requirements.
Parts Washing Equipment

Basket Washer accommodates high production requirements.

Rotary Basket Washer System is available in single or multi-stage configurations with manual or automatic load and unload systems. Basket system can be designed to accommodate various part sizes and geometries. Stainless steel tanks and enclosures provide durability and chemical resistance. Available heating systems include electric, gas, or steam. Standard units come in 2, 4, 6, 8, and 12 basket...

Read More »
Parts Cleaner Exhaust System reduces moisture loss.
Parts Washing Equipment

Parts Cleaner Exhaust System reduces moisture loss.

Exhaust Moisture Reduction System for parts cleaning systems minimizes moisture escape, enhances part drying, and conserves water, chemistry, and energy. It works with aqueous based parts washing systems that rely on spraying heated water. Exhaust system pre-warms incoming make-up water and blow-off air, and directs exhaust moisture back to solution tank. Exhaust air can be vented directly to...

Read More »
Radiator Washer reduces reject rate.
Parts Washing Equipment

Radiator Washer reduces reject rate.

High-volume radiator washer has high velocity blow-off units that reduce cross contamination between process stages, and remove excess water from radiator's inherent dense coil to ensure complete drying capability. Full width interlocking access doors to spray wash stages facilitate maintenance. It has polished stainless steel construction, and natural gas heat for wash, rinse, and dry stages.

Read More »
Loop Tunnel Parts Washer provides multi-stage cleaning.
Parts Washing Equipment

Loop Tunnel Parts Washer provides multi-stage cleaning.

CellMate 200 return-to-front conveyor parts washer includes aqueous spray washing and heated air drying in small-footprint package that has fork lift channels or caster for relocation. Overall dimensions of basic stainless steel machine are 37 x 78 in. Complex components may be fixtured on conveyor to facilitate targeted impingement of spray blow-off nozzles onto hard-to-clean or hard-to-dry...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics