Ethernet Switch features two 10 Gigabit uplinks.
Powered by Agere Systems' ET4K and Octal TruePHY(TM) 1081 Ethernet chips, 48-port TigerSwitch(TM) 1000 Model SMC8748L2 provides Gigabit switching at full wire speed. Layer 2 management features include Spanning Tree Protocol, VLANs, and link aggregation, which supports trunking 10 G ports. Able to distinguish between voice, video, and data IP traffic, switch includes ACLs and 802.1x for secure...
Read More »Industrial Ethernet Switch has 5- port design.
Designed for use in applications with limited space, such as automation systems, Skorpion-5 is EISK5-100T switch that occupies only 1 in. of DIN rail. Product requires no operator intervention and operates over 0 to +60Ã-
Read More »Gigabit Ethernet Switch PMC Card is conduction-cooled.
Unmanaged ruggedized mezzanine module PGR8 adds Gigabit Ethernet switched networks to VMEbus and CompactPCI-based embedded applications. Compliant with IEEE 802.3 Ethernet standard, it provides integrated 8-port Layer-2 switching and delivers full wire-speed performance over each port. Card supports jumbo packets up to 9,728 bytes and operates in PCI-X and 64-bit/66 MHz PCI modes with 10/100/1000...
Read More »Fiber Channel Switch aids in enterprise server applications.
Able to integrate into core or edge SAN configurations, QLogic 4Gb 10 and 20 Port FC Switches for BladeCenter enable end-to-end SAN solutions. McDATA 4Gb 10 and 20 Port FC Switches for BladeCenter offer same functionality, but integrate McDATA fabric into BladeCenter architecture. Also available, QLogic 4GB FC Expansion Cards for BladeCenter increase bandwidth connection between BladeCenter...
Read More »
Electric Aviation and a Sustainable Future
This white paper provides an in-depth overview into electric aviation and a sustainable future.
Read More »Fiber Optic Switch conducts Ethernet in Zone 1 areas.
Certified by KEMA, Single Port Fiber Optic Switch limits energy in fiber optic cable so it can be run without additional protective sheathing in flammable plant areas. DIN rail mounted unit uses 24 Vdc power and comes with four 10/100 MB TX Ethernet connections. Single fiber optic port can be used with DeltaV Zone1 I/O scanner as well as independently of DeltaV system to route Ethernet safely...
Read More »
Analog Signal Switches feature 130 MHz bandwidth.
Designed for high-speed switching of audio, video, and data signals in portable devices, SPST Models AS1741, AS1742, and AS1743 feature 1.6-3.6 V supply voltage, switching current up to 250 mA, and on-resistance of 0.8 Ohms. All digital logic inputs are 1.8 V CMOS compatible. Housed in 8-pin MSOP package, switches are suited for mobile phones, digital cameras, and PDAs, as well as MP3, CD/DVD,...
Read More »Ethernet Switch offers up to 4 Gb ports.
Suited for factories and other heavy-duty environments, Magnum(TM) 6K32T Managed Switch is available with user-selectable Gigabit transceiver modules, auto-negotiating 10/100/1000 Gigabit copper, and variety of fiber cabling types and distances. It can support total port count of 32 using any mix of 10/100 copper and fiber ports. Up to 2 Gb port modules can be traded off against 4-port 10/100...
Read More »
Ethernet Switch features eight 10/100 Mbps ports.
Suited for critical applications in harsh environments, Model EDG-6528L features screw terminals to ensure that power lines are solidly fixed and cannot be accidentally pulled out. It can be mounted on DIN rails or walls, and has operating temperature of 0-70Ã-
Read More »Network Switches include 1 or 2 hot-swap power supplies.
TotalStorageÃ-® SAN m-type switches include 8-, 12-, or 16-port SAN16M-2 Express Model and 16-, 24-, or 32-port SAN32M-2 Express Model. Both switches provide integrated support for Full-Fabric and FC-AL tape attachment; short-wave, 4 Gbps transceivers; and EFCM Basic, Open Systems Management Server, and Preferred Path. Optional Element Manager feature enables consolidated management via EFCM,...
Read More »Fabric Switch facilitates resource sharing.
TotalStorageÃ-® SAN32B-2 supports N_Port ID Virtualization, which provides IBM System z9 109 Linux(TM) server support for up to 256 virtual device addresses on single physical switch port. Virtual addresses can be allocated without impacting existing hardware implementation. Users activating NPIV on TotalStorage SAN32B-2 can optimize I/O performance through resource sharing and simplify...
Read More »
More performance and functionality for Sinumerik 828D CNC
Siemens new SINUMERIK 828D ADVANCED, SINUMERIK 828D and SINUMERIK 828D BASIC sets the standard for productivity enhancements of turning and milling operations on standardized machines and simplify the automation of grinding machines. See our video to learn all about it.
Read More »
