Tubes and Tubing

VIP Rubber and Plastic Company Approved as Source on BMS1-72 Specification

La Habra, CaliforniaÂ- — Vip Rubber and Plastic Company (Vip) today announced that it has received approval as a supplier for the Boeing material specification BMS1-72. This is the second approval Vip has received from Boeing, it is currently an approved supplier on the BMS1-57 specification. I am pleased with Boeing's confidence in Vip," said Howard Vipperman, president of Vip Rubber...

Read More »
Custom Connectivity Solutions
Electrical Connectors

Custom Connectivity Solutions

In the industrial manufacturing Industry, connectivity failures can lead to costly downtime, temporary outage, and in the worst case scenario, cause a line down situation in the facility. In most cases, the connectivity issues are caused by one of following conditions: Small dusts or particles getting into threads and contacts between connectors Liquids and chemicals causing corrosion of the...

Read More »
Atlas' Dick Pfingstler issues State of the PM Industry
Metal Injection Molding Services

Atlas' Dick Pfingstler issues State of the PM Industry

SAN DIEGOÂ- – In the annual state-of-the-industry address, Metal Powder Industries Federation president and Atlas Pressed Metals CEO, Richard Dick" Pfingstler, posed a picture of "resilience and creativity" for the powder metals industry, which is again poised for growth in 2015. Pfingstler's comments were presented at last month's POWDERMET 2015 conference in San Diego. Indicators...

Read More »
MD&M East: RAUMEDIC, the Single Source Provider for Polymer Tubing, Molding and Assembly
Tubes and Tubing

MD&M East: RAUMEDIC, the Single Source Provider for Polymer Tubing, Molding and Assembly

Leesburg, NCÂ- — RAUMEDIC is a development partner and system supplier for polymer products for the medical technology and pharmaceutical industry. At MDM East in New York, the company presents the newest innovations from the world of polymers. Thermoplastic PTFE Moldflon tubing, unique silicone molding parts and innovative catheter systems will be the highlights at booth 1245. As a...

Read More »
Laser Direct Structuring (LDS) Pioneer A-Laser to Showcase MID Advances At BIOMEDevice Event
Electrical Connectors

Laser Direct Structuring (LDS) Pioneer A-Laser to Showcase MID Advances At BIOMEDevice Event

At the upcoming BIOME Device event, set to take place May 6th 7th in Boston, MA,Â-  A-Laser, will highlight how its unique capabilities of Laser Direct Structuring (LDS) of Molded Interconnect Devices (MID), are lending new design and functionality freedom to the MID market.  From booth 845, A-Laser technology experts look forward to discussing LDS and its MID-enabling capability for...

Read More »
Viscoelastic Polyurethane Gel offers high elongation.
Resins

Viscoelastic Polyurethane Gel offers high elongation.

Featuring Shore OO 40 Durometer hardness and elongation over 1,000%, NTG-7 suits applications requiring soft elastomeric material with cushioning effect. Polyurethane molding/casting material offers good tear strength and less tacky surface without use of plasticizer. Since gel is viscoelastic, it slowly/gently absorbs pressure at low compression depth, and its deflection increases...

Read More »
Injection Molding Still a Steadfast Manufacturing Process
Molding Machinery

Injection Molding Still a Steadfast Manufacturing Process

The custom injection molding process is now more than 150 years old. It remains one of the most dependable manufacturing processes still in use today. The plastics we know of today owe their origins to the late 19th century European and American chemists who experimented with many kinds of rubber and residue from various chemical mixtures. From the early 20th century scores of new plastic...

Read More »
Premiere: Reduced Opening Stroke for IML Applications Thanks to Patented Solution from Beck Automation at the NPE 2015
Metal Injection Molding Services

Premiere: Reduced Opening Stroke for IML Applications Thanks to Patented Solution from Beck Automation at the NPE 2015

Typical USA: High productivity thanks to 4-cavity mold IML technology in a nutshell Oberengstringen (CH)Â- – IML has arrived in North America. IML, introduced in Europe more than 25 years ago, is currently gaining in significance in North America. Reason enough for Beck Automation to take up this trend. Beck Automation will be presenting the highly dynamic IML system B4 on the stand of the...

Read More »
Metal Injection Molding Services

PMES Powder Forged Components

PM Engineered solutions, the source for engineered solutions to metal or plastics component users, is a leader in providing powder forged components to our customer that are high strength, tough and requires only minor secondary machining. Powder forging is capable of taking powders such as iron and copper and putting them through a process where they are compacted, heated and forged so that...

Read More »
Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring
Sponsored

Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring

Krueger Sentry Gauge, a leader in chemical sight gauges, now offers the ultimate in aggressive liquid storage monitoring devices. From sulfuric and hydrochloric acid to bleach, and acetone, our products are designed with robust features that deliver a long and trouble-free service life. See our video to learn all about this new and innovative line of sight gauges.

Read More »

All Topics