New Low Flow Indicator with Maximum Operating Pressure of 6.9bar (100psi)
Provides visual indication of flow between 0.3 and 4 liters per minute. Available in brass or reinforced nylon materials in sizes 1/4”, 3/8” and ½” in NPT or BSPP. Suitable for use inside critical, restricted cooling paths such as injection mold cooling lines with bubblers or baffles.
Read More »
RD Rubber Technology Corporation is Pleased to Announce A New Product Featuring Rubber to Metal Bonding Produced by Compression Molding
Santa Fe Springs, CA -- RD Rubber Technology Corporation is pleased to announce a new product featuring rubber to metal bonding produced by compression molding. “Compression molded rubber parts are valuable in a range of industries and applications” stated Greg Sallee, RD Rubber’s President. “The manufacturing process is ideal for low and medium-volume production runs and is capable of...
Read More »
New SilSo Clear 21002 with Non-Yellowing Properties
Resistant to ultraviolet (UV), temperature and moisture enables material to perform under environmental conditions. Low viscosity and fast curing makes it ideal for pour-in-place or injection molding. Ideal for optical applications such as lenses, light guides and LEDs.
Read More »
Smith Metal Products Announces 3D Binder-jet Metal Printing for Quick-turn Prototype MIM-Like Parts
Center City, Minnesota: Smith Metal Products adds quick-turn 3D Binder-Jet Metal Printing parts for customers to evaluate and verify their product run utilizing a MIM-like process without the cost of building a test mold. Now manufacturers can easily see, touch and evaluate comparable prototype MIM-like parts produced on Smith Metals advanced 3D Binder-Jet Metal Printing additive production...
Read More »A Complete Guide to Aerospace Metal Fabrication eBook
Check out this eBook to learn all about aerospace metal fabrication - materials, processes, and applications.
Read More »
M&H Plastics Introduces Spiral Effect Allows a Brand to Add a Series of Ridges Inside The Bottle
Creates the ridges vertically or allow the ridges to curve in order to create a spiral effect. Ridges can help to mix contents within the contained solution by acting as a figurative cement mixer while adding an up-market visual aesthetic. Allows the bottle to be smooth on the outside so as to not affect the experience for end customers.
Read More »
New Assistance for Injection Molding Success Service Eliminates Incorrect Design Principles
The Conventus Polymers’ Assistance for Injection Molding Success Service (AIMS) helps firearm product developers to maximize success for converting metal firearm components to injection molded engineering polymers. The service focuses on eliminating improper material selection. The Conventus provides material flow analysis and computer-aided engineering tools for firearm designers to help...
Read More »
AMETEK SCP Introduces Polyethylene Molding Capabilities with Embedded Sensors and Payloads
AMETEK’s new polyethylene molding capabilities provide long life and high reliability for full depth rated sea floor applications. Polyethylene is preferred for molding due to its lower permeability to seawater. These capabilities are provided at the factory or in-the-field to mold polyethylene cable splices, breakouts and connector terminations.
Read More »
Meissner Will Host Guests at BPI West, San Francisco, CA, March 20 - 21, 2018
Meissner is pleased to announce its participation in the BPI West event, in San Francisco, California, on Tuesday, March 20th and Wednesday, March 21st, 2018. Meissner will be hosting guests in booth #516, at the Hilton San Francisco Union Square, where the Conference is being held. Meissner will be highlighting BioLink™ Modular Overmolding for single-use systems (SUS) with an interactive...
Read More »
GlobTek's PN MOL1B/C19505 Overmolds are molded on PVC or Silicone material cable jackets.
GlobTek’s PN MOL1B/C19505 Overmolds are designed for Molex 5557 series such as 39012060, 0039012060, 0039012065, 0039039062, 0455590002, and 0469920610. Units enables connector to withstand thousands of plug/unplug cycles. The combination of overmold and connector is suitable for round UL type 1185 of 2464 wire.
Read More »A. Schulman to Highlight How It Supports Customer Success at K Fair 2016
From industry-leading service to timely innovations to 'trend books,' Company is invested in the success of its customers AKRON, Ohio, Oct. 17, 2016 - A. Schulman, Inc. (Nasdaq-GS: SHLM), a leading international supplier of high-performance plastic compounds, powders, composites and resins, today announced that it will be exhibiting at the K Fair, the world's leading trade fair for the plastics...
Read More »
Optimize Your Workforce with Weavix™ by PK Industrial
The Weavix™ platform takes productivity, quality, and visibility to a new level by providing better communication and real-time KPIs. Check out the video to learn more!
Read More »
