SATA II PCI-X Controller provides 4 external ports.
Able to connect up to 4 external SATA hard drives, hot-swappable ADSA3GX4R-E is powered by SATA II ASIC, which provides embedded support for first-party DMA commands for Native Command Queuing and on-chip hardware RAID. Controller supports PCI-X and PCI Bus systems, providing 3 Gbps throughput rate per port for RAID or non-RAID external disk arrays storage applications. Attatched drives can be...
Read More »
Flash Microcontroller enables intelligent power conversion.
Model PIC16F785 lets power-supply designers utilize programmability of digital control in power-conversion applications by providing analog building blocks within programmable, 8-bit Flash microcontroller. Product integrates onboard analog peripherals such as ADCs, 40 nsec comparators, 1.2 V bandgap voltage-reference output, and 2 op amps. It combines integration of mixed-signal capabilities with...
Read More »ATM Network Module suits telecommunications systems.
Featuring line traffic management that supports CBR and VBR, Telum 1001-DE DS3/E3 ATM network adapter supports full-duplex ATM DS3/E3 port for protocol data unit sizes as small as 2 cells. IPMI microcontroller subsystem initializes board-level parameters and monitors board voltage and temperature while maintaining system status. Channel and Digital Service Unit provides line alarm conditions and...
Read More »
Control System suits remote and local architectures.
Providing users with control solution combined with remote I/O system, X20 System provides universal solution for any automation task in machine and system manufacturing. Applications for control, visualization, and drive technology are created using B&R Automation Studio with minimal required programming. Composed of bus module, electronic module, and terminal block, product features remote X2X...
Read More »
A Definitive Guide to Air Gaps in Magnetic Separation Equipment
This guide discusses how air gaps affect magnetic separation applications.
Read More »
Adapter enables remote servicing of machines and plants.
With 40 mm format of Simatic-S7-300 module, Teleservice Adapter II mounts on DIN rail or S7 channel and incorporates analog or ISDN modem. It lets users perform diagnostics, set values, and transfer programs and data over telephone lines from anywhere in world. Linked to Simatic programmable controller over MPI, PPI, or Profibus-DP interface, product is assigned parameters and programmed over USB...
Read More »
Fail Safe Components use Profibus and Profinet.
Simatic CPU 317F-2 PN/DP fail-safe controller features Profibus and Profinet interfaces, while modular ET 200pro I/O system with IP65/67 protection includes fail-safe Profinet I/Os. Automation solutions for standard and safety-relevant tasks can be generated via Profinet and Profibus using Simatic S7 distributed safety engineering software. Solutions comply with IEC 61508, EN 954, and NFPA 79...
Read More »Hot Swap Controller protects load voltages fro 0-6 V.
Low voltage Model LTC4216 allows safe insertion and removal of boards from live backplane. Together with analog current limit amplifier, electronic circuit breaker with adjustable response time provides dual level overcurrent protection. Adjustable soft-start circuitry limits rate of change of inrush at start-up. Offered in 10-lead MSOP and 12-lead DNF packages, Model LTC4216 meets demands of...
Read More »Microcontroller features embedded programmable logic.
Fabricated using 130 nm CMOS technology, GreenFIELD STW21000 combines ARM926EJ-S MIPS RISC processor core, 16-Mbit on-chip eDRAM memory, eFPGA block, and range of analog and digital peripherals. Unit is available with on-chip multiple HDLC controllers, 10/100 Ethernet MACs, multi-channel serial port, and Power-On-Reset function. It is suited for feedforward and digital pre-distortion ratio...
Read More »Signal Controllers offer 100 MIPS, 32-bit DSP performance.
Models TMS320F2801, TMS320F2806, and TMS320F2808 combine real-time performance of DSPs with peripheral integration, C-language efficiency, and microcontroller functionality. Integrated PWM provides 16 bits of accuracy in 100 KHz control loop and 12 bits at 1 MHz. Model TMS320F2808 also provides 16-channel, 12-bit ADC with up to 6.25 MS/s conversion speed. PWM channels, timers, QEPs, and captures...
Read More »Motion Controller offers 16 axes of general motion control.
Available for 4-, 8-, and 16-axis applications, Series SMP includes soft PLC and Windows-based GUI application. Single PC performs all servo control, including feedback loops and NC path generation, and also provides user interface, data processing, plant monitoring, network communications, file management, and CAD/CAM. LadderWorks soft PLC offers ladder logic control and includes console for...
Read More »
Don't Let Your Money Drain Down the Hole...Drill Steel with Euroboor
As a globally recognized manufacturer of industrial grade portable tools, Euroboor is at the forefront of drilling and cutting technology. Our reputation as an industry leader is built on robust products that fit a wide range of industrial cutting and drilling applications. See our video to learn more about all of our quality products.
Read More »
