ETS-Lindgren to Support LTE OTA Testing Using Anritsu MT8820C One-Box Tester
Anritsu's Support of LTE Physical Layer Test with Call Processing and 2x2 MIMO Enables Integration ORLANDO, Fla. -- Anritsu Company (CTIA Booth #2234) and ETS-Lindgren (CTIA Booth #760) are proud to announce that the Anritsu MT8820C One-Box Tester has been selected by ETS-Lindgren as an approved test solution for Over-the-Air (OTA) LTE testing, including MIMO. Based on this selection, support for...
Read More »QAM Monitoring System assists cable system operators.
Combining 3-tuner QAM device with CableCard Decryption and V-Factor video quality monitoring technology, V-FactorÃ-® Stream Probe QAM LD enables cable system operators to verify video quality at hub site just before programs are transmitted to home. System maximizes monitoring coverage through smart and flexible scheduling algorithm assigning channel lineup across units and tuners, while...
Read More »AXIe-Based Logic Analyzer offers 4 Gbps capture rates.
Combining 4 Gbps state capture speed on 68 channels and 2.5 Gbps on 136 channels with ability to capture data on eye openings as small as 100 ps by 100 mV, U4154A lets engineers measure digital signals used in emerging technologies as well as validate/troubleshoot designs. Timing zoom provides simultaneous state and timing measurements with 80 ps timing resolution and 256 K-sample memory depth,...
Read More »Malvern Instruments Insitec System Is Integral to New Automated RealTime Milling System on Sturtevant Inc. Booth #1827 at Interphex 2011
Malvern, UK: Following recent joint development, Malvern Instruments Insitec on-line particle size analyzer will be exhibited on the Sturtevant Inc. booth at Interphex 2011 (March 29-31, New York). The Insitec will be displayed together with a Sturtevant Mill and Schenck Accurate Feeder as the first time introduction of ARTMiS, a new Automated RealTime Milling System. This novel combination...
Read More »Thermal Solutions Guide: The Challenges for Heavy Equipment OEMs
In this guide, we consider some of the most common applications that require thermal solutions, such as vehicle exhausts, fuel tank shielding, and engine compartments, firewalls, & underbodies. As well as the options available to mitigate risk around combustion engines.
Read More »Signaling Tester supports W-CDMA/GSM wireless device testing.
With MX848001E-17 Simultaneous 64QAM/MIMO software option, MD8480C Signaling Tester can conduct protocol-based testing on W-CDMA/GSM wireless devices that incorporate this feature. Simultaneous 64QAM/MIMO offers 42 MBps download speeds similar to DC-HSDPA, with spectrum conserved through use of single 5 MHz channel. Using option, Model MD8480C supports all W-CDMA data rates, from 12.2 KBps voice...
Read More »Handheld Spectrum Analyzer conducts interference analysis.
Covering 100 kHz to 3 GHz frequency range, Model MS2711E has Displayed Average Noise Level of greater than -142 dBm in 100 Hz RBW, dynamic range of greater than 85 dB to measure small signals in presence of larger ones, and frequency accuracy of less than Ã-
Read More »Anite's LTE Test Platform Selected by CETECOM
CETECOM selects Anite for Verizon Wireless device certification testing CETECOM has selected Anite's LTE conformance toolset and SAS test solutions for Verizon Wireless device certification testing. Anite's Conformance Toolset delivers comprehensive & industry leading coverage of LTE signalling protocol test cases encompassing both GCF and PTCRB certification requirements. In addition, Anite...
Read More »Laser Beam Propagation Analyzer measures M-² at any wavelength.
Combining NanoScan near-field profiler with dedicated MÃ-² measurement hardware and software, NanoModeScan enables quantitative measurement and viewing of high-power CO2 laser beams in as little as 20 sec. System also reports beam waist diameter and location, divergence, and beam's Rayleigh range for each axis. With update rate of 20 Hz, system is suitable for CO2 laser-based material...
Read More »EMI Receiver optimizes compliance testing.
Serving as EMI receiver and signal analyzer, Model N9038A MXE is designed for laboratories that perform compliance testing of electrical and electronic products. Unit features displayed average noise level of -163 dBm at 1 GHz and measurement accuracy of Ã-
Read More »CS844 Carbon and Sulfur Determinator
St. Joseph, Mich.-The CS844 Carbon/Sulfur Determinator is designed for wide-range measurement of carbon and sulfur content of metals, ores, ceramics, and other inorganic materials using the combustion technique. The instrument features a custom MS WindowsÃ-®-based software interface designed specifically for touch-screen operation. The CS844 is the result of long-term research that...
Read More »Ensure Safety, Reliability in Your Cement Plant with Aerzen Blowers and Compressors
Aerzen offers blowers and compressors for challenging cement applications such as pneumatic conveying from raw mill to raw meal silos, combustion air, cement silos fluidization, and more. At Aerzen, safety is our top priority. Check out our video to learn more.
Read More »