New Linear Voice Coil Motor Delivers a Peak Force of 77.7 N
Moticont’s GVCM-051-089-05S06 Linear Voice Coil Motor is offered with high speed internal shaft and bearings in 50.8 mm dia. x 88.9 mm long housing with threaded mounting holes. Unit features high force to size ratio with continuous force of 24.6 N. The motor features a stroke of 69.9 mm and ground shaft with diameter of 5.99 mm. Unit is suitable for applications such as medical devices,...Read More »
Moticont's New Addition, LVCM-070-089-03, Features Higher Continuous and Peak Force
Moticont's new compact, linear voice coil motor, LVCM-070-089-03, has a higher continuous force and a higher peak force. It can work as a DC servo motor and performs with high accuracy and repeatability to less than 1 micron when in a closed loop use. This linear motor can be used in different settings such as work holding and clamping, antenna positioning, laser machining and drilling, and...Read More »
LVCM-019-016-02 Voice Coil Motor features stroke length of 0.25 in.
LVCM-019-016-02 Voice Coil Motor is suitable for testing, laser steering, mirror positioning, scanning, oscillations, dental or industrial applications. Unit produces continuous and peak force of 2.5 N and 7.8 N respectively. Having zero cogging and repeatability of less than 1 μm, unit come in 19.1 mm diameter x 23.8 mm long envelope. Motor offers high force-to-size ratio.Read More »
LCA6 Moving Coil Motor comes with built-in sensor feedback system.
SMAC’s LCA6 Moving Coil Motor offers linear stroke of 5-30 mm with encoder resolution of 0.1-5 micron. Having coil resistance of 18.9 Ω and peak force of 5N at 1.5 A, unit provides programmable position, force and velocity. Motors come with flat coils that are centered between cross rollers in order to reduce deflection load. LCA6 is used in electronic pick-and-place, biomedical dispensing,...Read More »
Bearing Solutions For Your Robotics and Automation Applications
This ebook provides an in-depth overview into bearing solutions for your robotics and automation applications.Read More »
Direct Drive Linear Motors offer 1.25 µm of resolution.
SDLM-019-070-01-01 Direct Drive Linear Motors come with quadrature optical encoder and optional plug-and-play linear motion system. Units come in 19.1 mm diameter and 69.9 mm long. Products provide stroke length of 12.7 mm, force rating of 2.7 N and peak force of 8.5 N. Motors are equipped with non-rotating shaft and linear bearings. SDLM-019-070-01-01 is suitable for semiconductor handling,...Read More »
Celera Motion Offers Low-profile Javelin™ Series Linear Motors
Designed for easy integration into OEM assemblies, the Applimotion Javelin Series Linear Motors are offered in a wide range of low-profile form factors. Frameless kit construction enables easy integration into machinery, linear stages and actuators. Built using state-of-the art magnetic designs, the Javelin Series delivers high acceleration and high speeds in compact, lightweight form factors....Read More »
Direct Drive Linear Motors offer 5 µm and 1.25 µm resolutions.
Available in SDLM-025-095-01-05 and SDLM-025-095-01-01 models, Direct Drive Linear Motors are compact with 1.0 in. stroke and 1.00 in. diameter with length of 3.75 in. Designed with 0.059 in. air gap, motors can be used for vibration, noise cancelation, scanners and laser beam steering. Rated to 5.82N continuous force and 18.4 N peak force, motors are attached to load for providing high...Read More »
LMG and LMS Linear Motors offer speed up to 10m/s.
Minimizing amount of force ripple, LMG and LMS Linear Ironcore Motors are fully pin-to-pin compatible. Motors uses single magnetic track and are operated with 600 V supply. Delivering up to 908N continuous force and 3640N peak force, motors feature compact design and offer no backlash. Suitable for direct drive applications, LMG and LMS motors are compatible with 50, 70 and 100mm track widths.Read More »
Can Stack Linear Actuators offer max holding force of 50 N.
Featuring 7.5-° step angle that provides fine incremental movement, 20 mm Series 20DBM is suitable for electronic pipettes, medical and non-medical analyzers, XY stages, and valve actuators. Customizable linear stepper motors are powered by high-energy neodymium magnets, optimized electromagnetic circuit, and bearing preload design. RoHS compliant products are available in Captive and...Read More »
Miniature Linear Voice Coil Motor has high force to size ratio.
Along with 14.5 oz continuous force and 45.7 oz peak force, 0.875 in. dia x 0.50 in. long LVCM-022-013-01 offers zero cogging, 0.25 in. stroke length, and precision drilled and tapped 4-40 UNC-2B mounting holes. This clean, quiet, low-inertia, high-acceleration, high-speed motor delivers repeatability toRead More »
Neagle Choice, LLC Announces New Available Services
Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.Read More »