Limit Switches

AEM2G Series Limit Switches feature epoxy resin filled die cast metal housing.
Limit Switches

AEM2G Series Limit Switches feature epoxy resin filled die cast metal housing.

Available with 5-Pin M12 Quick Disconnect and 3m pre-wired pigtail cable (right exit) connection types, AEM2G Series Limit Switches are equipped with one normally-open and one normally-closed contact. Designed with standard U.S. 25mm mounting hole spacing, switches are available in various actuator types like metal plunger, lever, rod actuator and spring actuator. Units come with snap-action and...

Read More »
AutomationDirect adds NEMA Rated Limit Switches from Eaton
Limit Switches

AutomationDirect adds NEMA Rated Limit Switches from Eaton

AutomationDirect has expanded its limit switch offering to include F25 Series NEMA limit switches from Eaton. These limit switches are NEMA 3, 3S, 4, 4X, 6, 6P, 13, and IP67 rated for operation in a variety of rugged industrial environments. All F25 Series NEMA limit switches consist of three modular, interchangeable, plug-in components: operating head, switch body, and wiring receptacle....

Read More »
Sealed Limit Switches feature integrated M12 connector.
Limit Switches

Sealed Limit Switches feature integrated M12 connector.

To facilitate connection of limit switches as sensing devices to industrial bus systems, MP700 Series is available with M12 connector integrated directly into housing. Option is implemented for 30 mm and 35 mm housing sizes which reflects 20 mm EN and 25 mm US mounting style. Five-pin version is used in MP740/60 metallic cases and 4-pin is used for MP730/750 plastic cases. Electrical rating is...

Read More »
IP67-Rated Wireless Limit Switches operate without battery.
Limit Switches

IP67-Rated Wireless Limit Switches operate without battery.

Featuring internal electrodynamic energy generator, Wireless Batteryless Limit Switches are available for operation at 915 MHz or 868 MHz, with max transmission range of 40 m indoors and 450 m outdoors. Displacement of actuator generates power to send uniquely coded signal to one or more compatible receivers. If limit switch does not receive confirmation signal within 15 ms, it transmits second...

Read More »
Analog Signal Conversion Transducers install in tight areas.
Limit Switches

Analog Signal Conversion Transducers install in tight areas.

As universally configurable limit-value switch with PDT relay output, MINI PRO set-point relay module has plug-in connection technology. Analog input switching range is adjustable from 0–24 mA and 0–12 V, and form C relay on output side is rated to 250 V AC/DC up to 6 A. OfferingÂ- adjustable input values from 0–24 mA and 0–12 V, MINI PRO analog-to-frequency transducer supports...

Read More »
Obtained IECEx Certificate for Explosion Proof Limit Switch (SLP5130-AL/RL/LRL)
Limit Switches

Obtained IECEx Certificate for Explosion Proof Limit Switch (SLP5130-AL/RL/LRL)

QLight obtained ATEX (European ATmospheres EXplosibles) and IECEx(IEC System for Certification to Standards Relating to Equipment for Use) which is the most representative explosion proof certificate. IECEx that obtained this time is an international cross-certificate system for explosion-proof electric equipment published by IEC. It retains safety level of the explosion-proof electric devices...

Read More »
CleverLevel: Reliable Limit Detection for Bulk Goods
Limit Switches

CleverLevel: Reliable Limit Detection for Bulk Goods

The different media characteristics of bulk goods frequently pose technical challenges for commonly-used sensor systems when measuring limits in storage silos and process tanks. Under physical influences such as temperature variations or changes in pressure, these sensors quickly reach the limits of their operating capabilities. Baumer's CleverLevel series, based on frequency sweep...

Read More »
Safety Limit Switches provide position monitoring.
Limit Switches

Safety Limit Switches provide position monitoring.

Configured with positive-opening design of normally closed contacts, per IEC 60947-5-1 standards, SI Series monitors position ofÂ- guards, gates, covers, and other movable machine fixtures and tooling. Units provide reliable monitoring regardless of environmental conditions and withstand any attempt to override switch and defeat system. Available with plastic or die-cast aluminum...

Read More »
IEC Limit Switches offer modularity and simplified wiring.
Limit Switches

IEC Limit Switches offer modularity and simplified wiring.

Constructed with polymer thermoplastic body housing that is self-extinguishing, IEC Limit Switches are available with broad range of operating heads, such as roller plunger, push lever, roller lever, and wobble stick. Removable body cover has captive closing screw and is hinged at bottom, while metal heads have 4 position at 90° angle axial rotation. For wiring simplicity, auxiliary contact...

Read More »
Best-in-class Electronic Rotary Limit Switch: The Successful Cooperation of Baumer and B-COMMAND
Limit Switches

Best-in-class Electronic Rotary Limit Switch: The Successful Cooperation of Baumer and B-COMMAND

A common technology project in windpower was successfully completed: electronic rotary limit switch primeCAM with SIL2/PLd certification is the result of the joint development and close cooperation of Baumer and B-COMMAND. Merging the high innovation power and profound expertise of each partner, the project was successfully finalized with primeCAM certification and start of production. The...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers