Interlock / Safety Switches

Non-Contact Switches are triggered by sensors.
Interlock / Safety Switches

Non-Contact Switches are triggered by sensors.

Available in both surface mount technology and through-hole styles, non-contact capacitive switches detect changes in capacitance from proximity. Infrared version reduces influence of ambient light via internal compensating circuit, providing less false switching. They can be encased in plastic or glass, and sealed to IP68 for waterproofing. Without need to turn electromechanical contacts, units...

Read More »
Taspeswitch Adds Various Tactile Remote Switches to Product Offering
Interlock / Safety Switches

Taspeswitch Adds Various Tactile Remote Switches to Product Offering

February 2009, Farmingdale, NY. Tapeswitch Corporation recently announced a new addition to their extensive line of pressure sensitive safety and sensing switches, the Tactile Remote Switch. Used to activate lights and / or lasers with minimum actuation, this Tactile Remote Switch has a variety of applications. Among the line of four different tactile products being offered by Tapeswitch,...

Read More »
Emergency Stop Switches
Interlock / Safety Switches

Emergency Stop Switches

Mechanicsburg, PA - (Automation Systems Interconnect, Inc.) ASI offers mushroom head industrial switches typically used in e-stop, emergency stop, applications. These popular switches are now available in both metal and plastic and with either a 40mm or 60mm operator head. The line of e-stop switches also includes momentary, maintained, pull to release, maintained, twist to release and...

Read More »
Emergency Stop Switches are only 19.5 mm deep behind panel.
Interlock / Safety Switches

Emergency Stop Switches are only 19.5 mm deep behind panel.

Unibody XA E-stop switches are available with 29 and 40 mm mushroom operators, and offer up to 4 contacts with safe-break technology, which uses spring-pressure to assure that NC contacts will open if switch is damaged or if contact blocks break off due to excessive force. IP65 and IP40 rated, switches are available with engraved EMO markings, in 1NC and 2NC contact configurations, as well as...

Read More »
Safety Switch prevents small machines from restarting.
Interlock / Safety Switches

Safety Switch prevents small machines from restarting.

SENSING-SAF-STARTÂ-® replaces power cord on small machines, such as table saws and drill presses, so they will conform to O.S.H.A. safety standards. Switch disconnects machine's power during power loss and prevents it from resetting until after machine switch has been turned off. Available in three 120-volt styles and one 240-volt single phase style, all SENSING-SAF-STARTSÂ-® are...

Read More »
Interlock / Safety Switches

Point Level Switch offers SIL-certified overfill protection.

Safety IntelliPoint RF(TM) Switch, used in above-ground bulk storage tanks, meets American Petroleum Institute's 2350 Recommended Practice for overfill/spill protection. Specifically, it comes standard with SIL1 certification; SIL2 is optional, and SIL3 is possible with redundant switch. Integral software continuously monitors application for changes and maintains repeatable trip point on probe....

Read More »
Interlock / Safety Switches

Load Switch can handle continuous output current of 1 A.

With ability to operate under supply voltage range of 2.4-5.5 V, SiP4613A/B suits applications including load switching, battery switching, USB peripheral ports, hot-swapping, and power management applications. User-defined current limit level protects input supply voltage from excessive load currents. In shutdown mode, switch reduces supply current to less than 1 Â-µA. Available in Pb-free...

Read More »
Interlock / Safety Switches

Switch features built in serial and Ethernet networking.

Featuring built-in test/outage reporting, user-configurable alarms, and high-speed alarm capture capability, Zenith ZTE Series 40-4,000 A automatic transfer switch helps prevent problems that could damage equipment or cause unnecessary outages to critical loads. Auto Load Shed allows unit to signal for disconnection of downstream lower-priority loads in event of generator overload. Power quality...

Read More »
IEC Contactors and Overloads are CE and RoHS certified.
Interlock / Safety Switches

IEC Contactors and Overloads are CE and RoHS certified.

Offered in 4 frame sizes, GC Series Contactors range from 25-140 A and up to 75 hp at 460 Vac. Units are available with wide selection of AC and DC coil voltages, choice of screw or lug terminals, dual coil terminals, and at least one auxiliary contact. Providing class 10 trip protection for motor loads, matching GT Series Bimetallic Overloads include set of auxiliary contacts, test button and...

Read More »
Detect Switch has electrical life of 1,000,000 cycles.
Interlock / Safety Switches

Detect Switch has electrical life of 1,000,000 cycles.

With footprint of 6.5 x 2.3 mm, and sitting 2.3 mm off PC board, RS Series of miniature surface-mount reed detect switch suits application in industrial sensing, factory automation equipment, limit sensing, and security systems. Available with either gullwing or J-lead terminations, RoHS-compliant detect switches can be top or side actuated. Featuring omnipolar magnetic reed sensor with magnetic...

Read More »

All Topics