Injectors

Mirador™ Chemical Injection Control and Diagnostic Module Provides Greater Monitoring and Control Capabilities over the Chemical Injection Process
Injectors

Mirador™ Chemical Injection Control and Diagnostic Module Provides Greater Monitoring and Control Capabilities over the Chemical Injection Process

Corpus Christi, TX, December 5, 2017 - DCiii, LLC introduces the Mirador™ Chemical Injection Control and Diagnostic Module that provides greater remote control and diagnostic monitoring capabilities over the chemical injection process for reduced waste and production costs. Operating on an open-based platform with Modbus RTU communication protocol, the Mirador™ seamlessly integrates with...

Read More »
Injectors

TREE I.V. Injector System comes with Hex PDS™.

Delivering an injection speed of up to 120 lb/in., FSeries TREE I.V. System features built-in expansion port Hex Parallel Distribution System. Reducing injection time, system’s fill port on the bottle cap allows the bottle to be filled without removing cap assembly. Featuring ¼ turn ball for quick open and close, unit’s main cap comes with master needle valve.

Read More »
Fanuc Roboshot SI-20A Secondary Injection Unit is equipped with HMI control.
Injectors

Fanuc Roboshot SI-20A Secondary Injection Unit is equipped with HMI control.

Having 0.63 oz. of maximum shooting capacity, Fanuc Roboshot SI-20A vertically mounted Secondary Injection Unit provides high molding performance and sustainability. Compatible with ROBOSHOT Alpha and B-Series injection molding machines from 50 ton to 300 metric tons, SI-20A can be operated from operation screen of Roboshot. Featuring rotary table,SI-20A can be linked to ROBOSHOT-LINKi.

Read More »
Injectors

Chillers LIXSHOOTER Injectors and ACCU-CHILL provide hygienic mixer and automated box chilling.

Providing chilling solutions for processors that need to maintain temperature avoiding food contamination, Linde’s LIXSHOOTER Injectors and ACCU-CHILL automated box chiller are both hygienically designed and keep temperature control. Featuring dual cryogen option, LIXSHOOTER Injectors switches between CO2 and LIN. ACCU-CHILL uses CO2 snow to chill food in boxes on demand. Meat, poultry,...

Read More »
Midspan PoDM++ Injector powers simple DM systems.
Power Distribution Systems

Midspan PoDM++ Injector powers simple DM systems.

DigitalMedia™ Ultra Midspan PoDM++ Injector (DM-PSU-ULTRA-MIDSPAN) provides single-point midspan solution for simultaneously delivering power over extended distances via DM® cable to both upstream and downstream DM devices. Output power capacity supports PoDM++ powered devices, and dual RJ45 connectors are provided for HDBaseT® and DM signal pass-through without affecting video or...

Read More »
Eliminate Odor & Toxic Gases at Animal Waste Lagoons
Odor Control Equipment

Eliminate Odor & Toxic Gases at Animal Waste Lagoons

WENDELL, N.C.- Odor and toxic gas problems at swine production farms are an old and persistent problem that effect surrounding areas. Some argue that there are health hazards, pollution problems and quality of life issues in the affected areas. The basic problem for the farmer is that they do not have a good method to add dissolved oxygen to the wastewater in the lagoons to eliminate the odor and...

Read More »
Standard Motor Products Releases 213 New Parts for Standard® and Intermotor®
Miscellaneous Controls

Standard Motor Products Releases 213 New Parts for Standard® and Intermotor®

NEW YORK - Standard Motor Products, Inc. (SMP) announces the addition of 213 new part numbers to its Standard® and Intermotor® lines. The release spans 49 product categories and expands coverage through the 2016 model year with more than 100 million additional VIO. SMP continued to make expansions to its diesel program, with the introduction of a diesel fuel injection harness, diesel...

Read More »
Chain and Bearing Lubricators

High-Pressure Grease Injectors withstand rugged environments.

Intended for use with automatic lubrication systems in such heavy-duty applications as mining and construction, GL-1™ X and XL offer hex-head nut that lets users adjust lubricant output. Both single-piece injectors, manufactured with fully enclosed press fittings and without anyÂ- vent holes, provide years of reliable operation in harsh operating environments. Design allows for stand-alone...

Read More »
Injectors

Fully Compliant PoE+ Injector aids equipment location flexibility.

Increasing flexibility for location of installed equipment, PINJ30 Power over Ethernet (PoE) Injector adds up to 30 W power to Ethernet CAT5/6 cabling and provide electricity to connected devices. ProductÂ- complies with the IEEE 802.3at (PoE+) standard, is backwards-compatible with IEEE802.3af (PoE), and supports Ethernet runs of up to 100 m. It can power both existing 10/100Base-T network...

Read More »
Injectors

Gas Injector accelerates water deaeration.

With Dif-Jet Gas Injector, nitrogen gasÂ- is injected and mixed into pressurized water pipe and then discharged into and circulated in tank of water. Nitrogen, being highly soluble in water, will force oxygen out of water without requiring vacuum pump, heat, or other device. Oxygen is vented out of top of tank automatically. When fed 5 cfm of nitrogen at 25 psi, injector produces 500 gallons...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers