Wound Chip Inductors offer current ratings to 1,100 mA.
Fixed Inductors

Wound Chip Inductors offer current ratings to 1,100 mA.

Offered in packages with 16mmÂ-² footprint and heights from 1.0-1.8 mm, NR series is designed for use in DC/DC converter choke-coil applications. Ferrite-resin compound, applied to exterior of wound chip inductor, allows more space for internal conductor, minimizes heat generation, and improves DC inductance characteristics. Products exhibit damage-free durability, even when dropped from 6...

Read More »
Chip Inductors suit high-current applications.
Fixed Inductors

Chip Inductors suit high-current applications.

With low-profile height of 0.027 in., KQC 0603 Air Core Chip Inductors have nominal inductance range of 1.2-27 nH with ±5% tolerance. DC resistance ranges from 0.020-0.120 ohms with allowable DC current of 1.00-2.25 A. Available in 4 mm pitch embossed plastic, units feature black body with no markings and are suited for reflow soldering. Applications include high-frequency circuits, movable...

Read More »
Current Sensing Power Inductors offer 5% DCR tolerance.
Inductors

Current Sensing Power Inductors offer 5% DCR tolerance.

With 3.0 mm profile, Models IHLP-2525CZ-06 and IHLP-2525CZ-07 are specified for saturation currents from 7.0-60 A and for typical DCR values from 1.4-97.7 mOhm. Featuring 3.5 mm profile, Models IHLP-5050CE-06 and IHLP-5050CE-07 are specified for saturation currents from 14-51 A and for DCR range of 1.85-30.86 mOhm. Packaged in 100% lead-free, shielded housing, units operate over frequency range...

Read More »
Toroid Inductors provide noise suppression.
Inductors

Toroid Inductors provide noise suppression.

Series 2300 features iron powder core that helps eliminate undesirable conductive emissions, making units suited for high-current applications. Measuring 1.28 x 0.65 in., inductors have 0.5 in. lead length tinned to within 1/16 in. of body. They offer inductance range of 10-1,000 Â-µH; self-shielding, low core loss; and operating temperature range of -55 to +105°C. Horizontal and...

Read More »
Surface Mount Inductors provide EMI protection.
Inductors

Surface Mount Inductors provide EMI protection.

With magnetic shield, Series DR331-7-8-9 protects against EMI problems in high-frequency filtering applications. Units feature open-frame design with seated profile of 0.115 in. above circuit board. Depending on model, inductance ranges from 1.0-10,000 Â-µH with DCR from 0.040-32.8 ohms over max current rating from 3.0-0.02 A. They are compatible with extreme temperatures ranging from -40 to...

Read More »
RF Choke combines small size and high performance.
Inductors

RF Choke combines small size and high performance.

Series 79F Conformal Coated RF Choke comes in subminiature size of 0.10 in. dia with 0.16 in. length. Inductance range is 0.10-470 Â-µH, operating temperature is -55 to 105°C, and dielectric strength is 500 Vrms. Self-resonant frequency is 300 MHz, with high Q value. Epoxy coating provides durability and protection against harsh environments. Choke suits application in computers,...

Read More »
Chip Bead Inductors suppress noise in 1-3 GHz frequency range.
Fixed Inductors

Chip Bead Inductors suppress noise in 1-3 GHz frequency range.

Offered in EIA 0603 case size, surface-mountable FBMH1608HL series allows component impedance characteristics to be configured to specific end device frequency requiring noise countermeasure. Material and component structure incorporates silver (Ag) wire, allowing series to achieve, simultaneously, 110-1,900 ohm impedance and 0.4-2.5 A current operation at frequency of 1 GHz. Max RDC values range...

Read More »
Inductors suit switchmode power supply applications.
Inductors

Inductors suit switchmode power supply applications.

Series SPB-500 Ferrite Drum Core Inductors utilize ferrite material that is stable from 0 to full-rated current. It consists of 26 parts, each having inductance values from 180.0 Â-µHy at 15.0 A to 2200 µHy at 1.35 A dc. Mounting hole through center of core accepts No. 6 non-metallic screw to secure part to printed circuit board. Two leads extend radically from bottom of core and are...

Read More »
Power Choke offers current ratings from 10-26 A.
Inductors

Power Choke offers current ratings from 10-26 A.

Surface-mount Series FW1405 utilizes rectangular copper wire, edge-wound on thermoset epoxy bobbin base, and high-saturation ferrite core. Base features integral 3-terminal design for optimal part adhesion when soldered to pcb. Inductance values range from 0.40-3.9 Â-µH and operating temperature is -25 to +80°C. Standard packaging is 24 mm tape.

Read More »
Surface-Mount Inductors and Chokes suit SMPS applications.
Inductors

Surface-Mount Inductors and Chokes suit SMPS applications.

SMT series products suppress and filter AC ripple current in DC output circuit and can also be used for energy storage and common mode noise attenuation. Equipped with toroidal cores, header design aids installation via wire-clamping feature. Units occupy minimal circuit board real estate in switch mode power supplies, telecommunications equipment, computers, and cable modems. Products are also...

Read More »
Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring
Sponsored

Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring

Krueger Sentry Gauge, a leader in chemical sight gauges, now offers the ultimate in aggressive liquid storage monitoring devices. From sulfuric and hydrochloric acid to bleach, and acetone, our products are designed with robust features that deliver a long and trouble-free service life. See our video to learn all about this new and innovative line of sight gauges.

Read More »

All Topics