New Indicators Products

Measuring Instruments accurately read part features.

Outside Micrometers are offered in 0 to 1, 1 to 2, and 2 to 3 in. measuring ranges. Dial Calipers, available in 6, 8, and 12 in. range, provide outside, inside, depth, and step measurements in graduations of .001 in. Also offered: 1 and 0.5 in. Dial Indicator with +/-.001 in. accuracy. Test Indicators have range of 0.008 and 0.03 in. and graduations of 0.0001 and 0.0005 in. respectively. Digital...

Digital Indicator suits unamplified strain-gage devices.

Housed in ABS case, GlobeTrotter provides complete programming and set-up via 2 buttons on front panel. Weighing functions are displayed on 16 alphanumeric LCD characters. Dual 9V alkaline batteries power up to 8 strain-gage sensors with bridge impedances of 350 ohms. Standard functions include dead weight (zero offset) up to 1.5 mV/V, Maximum full scale 2.5 mV/V, minimum value of 1 microvolt,...

Bin Level Indicator enables continuous operation.

SafePoint(TM) fail-safe, rotary paddle, bin level indicator offers magnetic sensing technology, which continuously detects material presence and operational status. Unit's shaft rotation is monitored by detection of magnetized rotating disk; material sense and fail-safe outputs are provided. Housing features twist on/off cover, local status indicating light, and two conduit entrances. Safety...

Flow Indicators suitable for sterile applications.

FDA compliant, 3-A approved stainless steel and borosilicate glass visual flow indicators can be mounted as section of hose or pipeline. They provide clear view of virtually any process fluid or powder. Indicators have non-trapping O-ring, electropolished contact surface, and armored housing to protect glass from impact damage and pipe stress. Pressure ratings range up to 150 psig. Indicators can...

A Definitive Guide to Air Gaps in Magnetic Separation Equipment

This guide discusses how air gaps affect magnetic separation applications.

Level Transmitter has 4 to 20 mA output.

Jupiter(TM) magnetostrictive device measures level with precision of +/-0.015 in. and repeatability of +/- 0.005 in. It has LCD with pushbutton operation, simple set-up and configuration, and optional HART(R) interface. Transducer operates in ambient temperatures of -40 to +160 deg F and process temperatures to +248 deg F at waveguide. Works with company's Atlas and Gemini Magnetic Level...

Indicators are actuated by single or dual bellow.

Indicators are used for measurement of differential pressure, flow rate, and liquid level. Dial sizes include 3, 3 1/2, 4 1/2, and 6 in. Pointer traverses 270 deg arc and is driven by precision-jeweled rotary movement that multiplies rotation of torque tube through gear and pinion to pointer. Zero/range adjustments can be made without removing scale plate or pointer. Certain models have NEMA...

Digital Force Indicator offers 1 or 2 channels.

DFI 4215 microprocessor-based instrument measures and controls strain gage transducer based systems. It combines force channels, encoder position channels, print capabilities, and RS232/485 serial communications. Optional Auto ID feature automatically identifies load cell and applies calibration specifications.

Level Probe withstands high pressure steam.

Model 7XS high temperature/high pressure steam probe for Eclipse guided wave radar transmitters operates at 605 deg F @ 1,585 psi and withstands corrosive nature of steam applications. It measures levels in saturated steam applications, such as boilers, de-aerators, and feed water heaters.

Bin Monitors feature point level control sensors.

Rotary paddle level indicators detect dry bulk materials. They automatically shut off motor when paddle is in stalled position. Built-in slip clutch protects motor and drive gears from excessive forces. Housing is NEMA 4 and explosion-proof unit is also available. Interchangeable paddle assemblies fit most bulk solid application needs. High temperature unit can be used where temperatures reach...

Annunciator Relay lights up, sends signals.

Compact solid state Annunciator Target Relay (ATR) illuminates bright LED to indicate Trip event, and sends signals to activate two other devices, such as alarms, LORs, or other relays. Once Trip signal has been detected, ATR will latch on, keeping LED lit until it has been manually reset. Target LED is highly visible even when viewed from extreme angles. It is available in amber, red, green,...