Rotary Hammer is powered by 36 V lithium-ion battery.
Electric Hammers

Rotary Hammer is powered by 36 V lithium-ion battery.

Weighing 9.5 lb, Model 11563VSR LITHEON(TM) Bulldog® Rotary Hammer features 7.2 A motor that delivers 0-4,260 bpm and 0-960 rpm, while dialed-in and concentric piston, striker, impact bolt, and guide tube provide strike force of 2.2 ft-lb. Drilling depth ranges from 3/16 to 5/8 in. in concrete, with 1 in. solid bit capacity and 2 5/8 in. thin wall core capacity. Three-mode selector allows...

Read More »
Electric Hammers

Rotary Hammers provide 7.0 lb-ft impact energy.

Rated at 11.0 A, 1 9/16 in. Model HR4001C and 1 9/16 in. Model HR4010C with AVT technology feature 235-480 rpm speeds synchronized with 1,350-2,750 blows/min to prevent overlapping impacts. AVT counterbalance system minimizes vibration to 4.5 m/sÂ-², while variable speed dial with 5 preset speeds and electronic speed control minimizes speed loss. Torque limiter ensures stable torque control...

Read More »
Hydraulic Hammer features 500 lb-ft energy class.
Hydraulic Hammers

Hydraulic Hammer features 500 lb-ft energy class.

Sized for use with all Cat® skid steer and multi-terrain loaders as well as 302.5, 303.5, and 303 CR mini hydraulic excavators, Model H55Ds features recommended carrier weight of 5,500-9,900 lb. It can be equipped with chisel, moil, spade, or compacting plate. One-piece body eliminates tie rods and nuts. Enclosed housing protects power cell, while recoil isolation protects carrier from...

Read More »
Hammers

Demolition Hammer delivers 19.2 ft-lb of impact energy.

Equipped with 12.5 A motor, 20 lb SDS Max Demo Hammer Model H60MRV features variable speed control dial, no-load noise level of 91.5 dB, vibration absorbing handle that flexes on sides to isolate shock, and adjustable side D-handle that rotates 360° and swivels front to back depending upon application. With Internal Double Insulation technology, aluminum housing of hammer is intertwined...

Read More »
Electric Hammers

Rotary Hammer is suited for chipping and light demolition.

Able to work with stone, concrete, and brick, MHE 65 SDS-Max Chipping Hammer employs 10.5 A motor that provides 1,325-2,650 bpm and 1.0-10.0 joules of single blow energy. Vario-Tacho-Constamatic electronic speed control maintains constant speed between load and no-load. Other features include magnesium die-cast gear housing, auto-stop carbon brushes, spring-loaded lip seal, winding protection...

Read More »
Electric Hammers

Bench Rammer delivers 760 blows per minute.

With bore size of 1 5/16 in. and 4 in. stroke, Model MP-241B features replaceable rubber butt and double-action sand wiper seal to exclude dirt and grit from inside tool. Aluminum backhead minimizes weight and operator fatigue, while hooked lever throttle maximizes operator comfort.

Read More »
Rotary Hammer offers efficient dust collection capability.
Electric Hammers

Rotary Hammer offers efficient dust collection capability.

Suited for continuous operation, 1 in. HR2432 has built-in dust collection system that consists of bag, fan, and in-line dust collection hose with elbow-shaped nozzle. Unit weighs 6.6 lb, is rated 6.7 A, and provides 1.6 ft-lb impact energy. With no-load speed of 0-1,000 rpm, hammer delivers 0-4,500 bpm and features 3-mode operation switch. Optimum chisel positioning is accomplished with...

Read More »
Electric Hammers

Rotary Hammer provides 3 modes of operation.

Equipped with 7.0 A motor, 15/16 in. SDS Plus Rotary Hammer, Model DH24PF3 produces 2.5 lb-ft impact energy, no-load speed of 0?1,150 rpm, and impact rate of 0?4,600 ipm. Three modes of operation include drilling only, hammering only, and hammer drilling, controlled by mode selector dial located under body. When using cold chisel or spade bit, variable lock mechanism, available in hammer mode...

Read More »
Rotary Hammer performs hammer drilling and chiseling.
Electric Hammers

Rotary Hammer performs hammer drilling and chiseling.

Equipped with 9.6 A motor, Spline Drive KHE 54 offers no-load speed of 135-275 rpm and 1,300-2,600 bpm. Vario-Tacho-Constamatic electronic speed control enables tool to maintain constant speed between load and no-load. Overload clutch limits maximum amount of torque applied if tool blocks during operation. Hammer offers rotational torque of 531 lb-in. and drilling range of Â-½-1½ in....

Read More »
Rotary Hammer delivers 2.2 lb-ft at 0-5,800 bpm.
Electric Hammers

Rotary Hammer delivers 2.2 lb-ft at 0-5,800 bpm.

Offered in D-handle and Pistol-Grip versions, 1 in. SDS-plus® Bulldog Xtreme(TM) Models 11255VSR and 11253VSR operate from 0-1,300 rpm using 7.2 A motor. Drilling range in concrete is 3/16-5/8 in. with solid bit capacity of 1 in. and thin wall core capacity of 2 5/8 in. Piston, striker, and impact bolt and guide tube are dialed in with tight tolerances to remain concentric. Rotating brush...

Read More »
Gorbel Introduces New Mobile Fall Protection Unit
Sponsored

Gorbel Introduces New Mobile Fall Protection Unit

Providing adequate fall protection is always a critical consideration and one that in many cases can be difficult to ensure. The new Mobile Fall Protection Unit is designed to facilitate positive fall protection in applications that would typically be difficult or impossible to provide with standard methods. To learn all about the advantages and convenience, see our video.

Read More »

All Topics