Fixturing for Welding - Electronic Enclosures
Sometimes a fixture does not need a table for its base. U-Form Spacer Blocks are assembled into a rectangular structure. Changeover for different sized parts is elegant, yet simple. Open access to the middle makes loading the loose pieces easier. The U-Form Spacer Block on the near side can be accurately shifted in or out depending on the part's width. Fixture Highlights Nearside U-Form Spacer...
Read More »
Workholding Chuck precisely grips helical gears.
Designed to grip OD of 9 in. diameter helical gears, MG Mini-Gear Pitch Line Chuck features pins mounted in loose fitting housing so that they can float. Pins pick up pitch diameter, and jaws grip OD of pins. At 10 in. dia, Northfield model 1000 air chuck features 2 pin cages: one for left hand helix, and one for right hand helix. Pin cages are changed out by removing 3 mounting screws.
Read More »Test Fixture streamlines touchscreen testing process.
Projected Capacitive Test Fixture allows use of sampling method to verify integrity of touchscreens. Selected screens are individually connected to testing unit which outputs digital reading of sensor's touch levels and provides result of pass/fail. Fixture includes projected capacitive controller, 2 FPC adapter cables, power adapter, RS232 cable, as well as projected capacitive testing software....
Read More »
Hydraulic Workholding Fixture features dual-purpose design.
Suitable for primary, secondary, and tertiary clamping, Model H-PRP first snaps work piece into position and then, once hydraulics are actuated, clamps part for machining. Hydraulically actuated position and retention pin provides clamping force of 500 or 1,000 lb at 5,000 psi. Low-profile design enables machining from multiple sides, while eccentric body and adjustable head accommodate casting...
Read More »
Diaphragm Chuck is developed for indicator manufacturers.
Designed for manufacturers of electronic and mechanical indicators, Model DPH-600 is 6 in., 10,000 rpm, totally sealed, TIR diaphragm chuck with special jaws, stop, and changeable fixtures. It enhances and increases production of machining 2 bores that guide indicator rod. Once side is machined, fixture is turned over, and second side is machined; alignment of 1/10,000 TIR is achieved bore to...
Read More »Slat Wall System is eco-friendly.
Made of 100% recycled aluminum, AdjusÃ-® SlatWall and UpRight System can be used in wide variety of workspaces, from manufacturing or poultry processing plants to clean rooms. System securely clamps onto any existing work surface, without drilling any holes. One in. on-center SlatWall stands 6 in. tall and stacks to create an entire back wall or serve as bin rail. AdjusÃ-® SlatWall System...
Read More »
Fixture System is suited for 3D coordinate metrology.
Featuring fabricated T-slot fixture plate and integrated component kit, CMM T-Slot Fixture System offers infinite positioning of locating components, simplifying fixture construction. Combined with a laser engraved reference system for documenting fixture setup to maximize repeatability, T-slots are alpha-identified with engraved reference scales in English or Metric versions. System can be...
Read More »Agilent Technologies to Release Boundary Scan-VTEP Hybrid that Minimizes Obstacles to In-Circuit Test
SANTA CLARA, Calif., Feb. 14, 2008 - Agilent Technologies Inc. (NYSE: A) today announced that it will offer in-circuit test (ICT) users an innovative way to test their printed circuit board assemblies (PCBAs) in a limited access environment without sacrificing test coverage or time-to-market - while simultaneously saving on fixture cost and reducing test resources. The technology is a hybrid...
Read More »Development Kit provides complete workholding solution.
Unilock Starter Kit lets users plug components immediately into their production cell, eliminating setup time and promoting productivity. Offered as complete workholding solution, kit includes clamping chucks mounted to universal adapter plates; universal pallets that facilitate attach/detach of positioning; and clamping components used to hold that which needs to be exchanged in and out of...
Read More »
RAYCO Broadens Distributor Network and Introduces a New Round of Innovations
Rayco Manufacturing, Inc. of Sterling Heights, Michigan introduces an increased distributor network and new configuring options for advanced vision/contact CMM fixturing. A typical Rayco fixture can be developed in minutes, instead of the weeks or even months required to manufacture a dedicated holding fixture. If the part design is modified over time, the fixture can easily be modified to match...
Read More »
Eliminate Expensive Repairs with the Hot-Shot Pipe Thawing Machine
The new Hot Shot Pipe Thawing Machine delivers an innovative and highly effective approach to thawing frozen pipes. Easy to use and versatile, it is loaded with robust features that further suit it to many challenging environments. To learn all about it, see our video.
Read More »
