Fixed Inductors

Fixed Inductors

37 Year-Old Coil Proves Product Durability

The Danfoss office in the north-west Czech Republic town of Chodov had a visit from a very satisfied customer recently. For the past four decades, the customer's domestic gas boiler had been working perfectly. But in March 2010, after 37 years without a glitch, a coil on an EVJD 6 solenoid valve wore out. Impressed that he hadn't had to do any maintenance on the boiler's valve system all this...

Read More »
Common Mode Choke Coils support USB 3.0 SuperSpeed signals.
Fixed Inductors

Common Mode Choke Coils support USB 3.0 SuperSpeed signals.

Supplied in 1.25 x 1.0 mm 0504 chip package, DLP11TB series reduces undesirable radiation noise in electronic equipment. Film inductor forming technology is used to boost cut-off frequency to 8 GHz or more, minimizing effects of noise on signals to enable quality USB 3.0 SuperSpeed transmission. Suited to mobile devices, products have common mode impedance of 80 Ohms at 100 MHz and match...

Read More »
Fixed Inductors

Inductors: Sample Kit with Current-Compensated Ring Core Power Chokes

TDK-EPC, a group company of the TDK Corporation, presents a new sample kit of EPCOS current-compensated ring core power chokes. These EMC components are designed for a voltage of 250 V AC and offer current capabilities of between 0.4 and 6.0 A. Their inductances are between 0.2 and 39 mH. The power chokes of the series B82721* are designed for the suppression of common-mode interference in...

Read More »
Fixed Inductors

Chip Inductors replace wire-wound units in DC-DC converters.

Designed specifically for miniaturization of DC-DC converters in LCD TVs and set top boxes, LQH6PP_43 Series features 2424 size casing measuring 6.0 x 6.0 x 4.3 mm. Magnetically shielded units range from 1.0 Â-µH model with DC resistance of 0.009 W to 100 µH model with DC resistance of 0.436W. Allowable DC current, based on inductance change within 30% of nominal, is 7.50 A for 1.0...

Read More »
0402 SMD Wire Wound Ceramic Chip Inductors
Fixed Inductors

0402 SMD Wire Wound Ceramic Chip Inductors

0402C-XXX is a family of a SMD Wire Wound Ceramic Chip inductors with a high Q at high Frequency and SRF up to 12.7 GHz. This family of parts is offered in values ranging from: 1.0 nH(1360mA) to: 68nH(100mA) with the following tolerances: K: ± 10% J: ± 5%, G: ± 2%. The Operating Temperature is from: -40°C to: +125Â-ºC. These parts can be used on Pagers, Mobile...

Read More »
SMD Common Mode Choke
Fixed Inductors

SMD Common Mode Choke

SMD Common Mode Chokes SCM2012F (0805) series and SCM3216F (1206) series suitable for personal computers and peripherals. Impedance range from 90 Ohms to 2200 Ohms @ 100 MHz.; DCR ranges from 0.3 Ohms to 1.2 Ohms; operating current ranges from 370 mA to 200 mA; IR 10 MOhms min. @ 125 Volts, packing: taped & reeled.

Read More »
Fixed Inductors

Delphi Extends Its Engine Management Systems Range in Strategic Product Families

Delphi extends its coverage up to 80% by introducing more than 40 new part numbers in 3 product lines PARIS, France - Delphi is launching 40 new part numbers in three key product lines in EMS (Engine Management Systems) to meet rising demand for its OE-quality replacement EMS components. Extensions include ignition coils, mass air flow sensors, and manifold pressure sensors. Delphi's ignition...

Read More »
Fixed Inductors

Wirewound Chip Inductors suit DC-DC converter applications.

Series LQH3NP_J0 series wirewound chip inductors has low profile (1.2 mm max), and is available in 1.0-47 Â-µH denominations. The series features low DC resistance, down to 0.040 Ohm, and rated current up to 1.62 A is supported. All parts are magnetically shielded to avoid electromagnetic interference with surrounding circuitry. Maximum footprint is 3.2 x 3.2 mm.

Read More »
Ceramic Inductors target aerospace and military markets.
Fixed Inductors

Ceramic Inductors target aerospace and military markets.

Suited for mission-critical applications, ML Series 0603-size inductors offer inductance values of 47 nH to 22 Â-µH and Q ratings as high as 50 at 250 MHz with self resonant frequencies as high as 16 GHz. Ceramic construction provides high current handling, while high-temperature encapsulant enables operation in ambient temperatures from -55 to 155°C. Featuring COTS Plus,...

Read More »
Coils suit solenoid valves in hazardous environments.
Fixed Inductors

Coils suit solenoid valves in hazardous environments.

Suited for use in Lucifer stainless steel solenoid valves as well as brass and aluminum X valves, d mb" and "ia" ATEX-certified 37 mm Electrical Coils meet T6 temperature classes. Stainless steel fittings and IP67 protection level permit coils to be used where ambient constraints are hard, aggressive, and sometimes corrosive. By using booster technology for "ia" product, current consumption is...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers