ESD Products

Miscellaneous Controls

ESD Protection Array targets digital consumer devices.

Housed in 4 x 1.7 mm, 16-lead TDFN package with 0.5 mm pitch, XtremeESD CM1238 provides 8 channels of ESD protection that meet ±15 kV contact discharge and ±20 kV air discharger per IEC61000-4-2 standard. Unit incorporates PicoGuard XS® architecture, which integrates inductors with diodes to create fixed point impedance matching for high speed data lines. Device is suited for...

Read More »
Miscellaneous Controls

Compact ESD Array protects high-speed serial interfaces.

Supplied in 0.8 x 0.8 x 0.4 mm CSP, PicoGuard CM6100 provides 2 channels of 15 kV air discharge ESD protection with sub 1.5 pF capacitance for USB 2.0 Hi-Speed interfaces as well as LVDS and emerging serial interfaces such as MIPI used in handsets and mobile devices. Dynamic resistance (0.7 ohm) and clamping voltage (9.8 V typ) define how quickly internal diode reacts to ESD strike and how much...

Read More »
Modules

8 Channel Universal Analog Input Modules with High Voltage Protection

In these tough times, at least your electrical equipment can be insulated from disturbances. Both our M-7019R and our I-7019R provide serious ESD protection (3KV, 4KV respectively) in addition to delivering a real variety of network data acquisition and control functionality. Both input modules accept input through 8 differential, configurable channels of the types mV, V, mA and thermocouple with...

Read More »
Circuits

ESD Protection Diodes are suited for portable devices.

Model ESD11N5.0ST5G is 0.6 pF unit that has clamping performance and minimal capacitance needed for USB 2.0 and HDMI applications. It also maintains less than 0.5 dB insertion loss up to 3 GHz. Model ESD11B5.0ST5G is 15 pF product that suits general purpose and low-speed data lines. Housed in 0.6 x 0.3 x 0.3 mm, 0201 DSN-2 package, both provide clamp input ESD waveform of 8 kV, per IEC61000-4-2...

Read More »
Construction Materials for the Future
Sponsored

Construction Materials for the Future

In this eBook, we highlight some key advantages of Cross-Laminated Timber (CLT) and show why every builder needs to consider adopting this remarkable construction advancement. We'll also introduce you to the latest innovation in CLT, GRIPBlock™, an exciting new technology that will change the way you look at CLT forever.

Read More »
Circuits

ESD Device protects antennas in mobile handsets.

Intended for FM radio, GPS, Bluetooth, and WLAN antennas, single-channel PicoGuard CM1282 features low capacitance of 0.5 pF and low insertion loss of less than -0.25 dB through 1.8 GHz. Device delivers 8 kV contact discharge protection per IEC 61000-4-2 Level 4. Available in SOD-882 lead-free package, RoHS-compliant unit meets linearity mask for 802.11 protocols.

Read More »
Circuits

ESD Protection Devices offer integrated impedance matching.

Incorporating PicoGuard XS architecture, which integrates inductors with ESD diodes, ExtremeESD® CM1235 and CM1236 feature 8 channels of ESD protection that meet 8 kV contact discharge requirements of IEC61000-4-2 standard, while also meeting 100 W differential impedance matching requirements of HDMI(TM) 1.3a and DisplayPort(TM) digital video standards. Housed in 16-pin TDFN package,...

Read More »
Rectifiers (Diodes)

ESD Protection Diodes come in 0201-sized package.

Featuring 0.18 sq-mm footprint, ESDALCxx-1U2 Series includes 3 models with breakdown voltages of 3.9, 6.1, and 14.2 V. All can survive multiple strikes up to IEC61000-4-2 Level 4, which specifies contact-discharge pulse of 8 kV and 30 A surge current. When ESD pulse occurs, diode protects chips from pulse energy by diverting surge current to ground and clamping voltage spike to low level that IC...

Read More »

New ESD-Conductive Cable Carrier

EAST PROVIDENCE, R.I. - September 25, 2008 - igus®' 'T3' cable carrier for applications involving very high speeds and accelerations was one product to catch the attention of visitors to IMTS. The lightweight cable carrier runs extremely smoothly with minimal vibrations and virtually no noise: 33 dB(A) with 26.5 dB(A) of background noise. The polymer side bands are injection-molded as one...

Read More »
Two New 'ESD' Logistics Structures Enhance Applications
Material Handling and Storage Racks

Two New 'ESD' Logistics Structures Enhance Applications

Creform® Corporation demonstrates the versatility, ergonomics, flexibility and adaptive application potential of its Creform® System with two new ESD rated material handling and logistics structures. The structures are designed to safeguard static sensitive electronics during assembly and transport. The new concepts include a mobile workstation and, as a complement to the station, an...

Read More »
ESD Safe Tools feature SwissGrip® handle.

ESD Safe Tools feature SwissGrip® handle.

With soft handle surface that ensures secure grip even if hands are wet, SwissGrip® screwdrivers transfer rotational forces of the hand to screw, maximizing torque. Compact 8215 ESD Screwdriver Set includes ESD handle and precision screwdrivers. Designed to check screw tightening torques for assembly operations, 8315A ESD Torque® Handles come with preset torque setting range of 10 cNm...

Read More »

All Topics