ESD Products

ESD-Protection Array has less than 1 pF typical capacitance.

Model VBUS054B 4-line diode array protects dual high-speed USB ports or up to 4 other high-frequency signal lines against transient voltage signals up to 15 kV. It features typical leakage current of less than 0.1 Â-µA at maximum working voltage of 5 V. Bus port-protection array offers breakthrough voltage of 6.5 V at 1 mA, and maximum clamping voltage of 15 V at 3 A. Array comes in leadless...

Read More »
ESD Protection Array comes in compact LLP1713 package.

ESD Protection Array comes in compact LLP1713 package.

Integrating 8 diodes in LLP1713 package with 0.55 mm profile, VESD05A8A-HNH provides ESD protection in portable electronics. It protects up to 8 signal or data lines in bidirectional asymmetrical mode and can also be used as 7-line protection device in bidirectional symmetrical mode. Max leakage current is less than 1 Â-µA, and typ capacitance is 30 pF. Unit provides transient protection for...

Read More »
Diode Array provides up to 15 kV ESD protection.

Diode Array provides up to 15 kV ESD protection.

VBUS054B 4-Line Bus Port Protection Diode Array protects dual high-speed USB ports or up to 4 other high-frequency signal lines against transient voltage signals. It offers capacitance of less than 1 pF and typical leakage current of less than 0.1 Â-µA at maximum working voltage of 5 V, as well as breakthrough voltage of typical 6.5 V at 1 mA. Packaged in leadless LLP75 with 1.6 x 1.6 mm...

Read More »
ESD Protection Diode features 0.4 mm profile.

ESD Protection Diode features 0.4 mm profile.

Housed in SOD923 package, single-line Model VCUT0714A-02Z features low typical capacitance of less than 8 pF at 0 V and max leakage current of less than 0.1 Â-µA. Bi-directional, asymmetrical unit measures 0.6 x 1.0 mm, minimizing board space required for ESD protection in portable electronics. With working ranges from 7-14 V, diode provides transient protection for one data line as per...

Read More »

Dual Conductor Cords control static.

Available in 5, 10, and 20 ft lengths, Series 2300 features double-insulated jacket that helps cords withstand repeated flexing. Cords are part of personnel ground monitoring system designed to control personal ESD when used in conjunction with ESD workstation monitors. Models 2360, 2370, and 2371 feature straight plug design. Models with right angle plug include 2360R, 2370R, and 2371R with 3.0...

Read More »
ESD Diode Arrays come in micro leadframe packages.

ESD Diode Arrays come in micro leadframe packages.

Designed to protect static-dissipative equipment from damage or degradation caused by overvoltage transients, ESD Diode Arrays offer ESD protection up to 15 kV for 1-5 lines. Featuring 2 ESD diodes in SOT883 package, Model ESDALC6V1M3 offers 7 pF capacitance and can be used for 1- or 2-line ESD protection. Models ESDA(LC)6V1M6 and ESDA(LC)6V1-5M6 are 4- and 5-line ESD diode arrays offering 2...

Read More »

Polypropylene Compound offers ESD protection.

Nexstat-10C896 static dissipative polypropylene compound can be molded with consistent resistivity in range of 106-109 ohms/sq. It protects static sensitive components from damage caused by field induced voltages. Recyclable compound has low ionic contamination, low out gassing, and minimal sloughing. Product suits manufacture of static protective storage bins, tote boxes, guide rails,...

Read More »
Material Handling Components eliminate static build-up.

Material Handling Components eliminate static build-up.

ESD anti-static components protect electronics from static during assembly and handling operations. They use conductivity to eliminate static build-up and safeguard circuitry. Components include pipe, slide pipe, and L-channel slide pipe; metal joints; height adjusting feet; grounding end caps; and casters. Parts allow users to design and assemble material handling structures for use in static...

Read More »
ESD Suppressor suits IEEE 1394 and dual USB 2.0 protocols.

ESD Suppressor suits IEEE 1394 and dual USB 2.0 protocols.

PulseGuardÂ-® PGB Series 0805 Surface Mount ESD Suppressor features low capacitance of 0.055 pF and ESD event response time of less than 1 ns, ensuring ESD protection without waveform distortion. Four-channel component is capable of clamping direct-contact pulses of 8 kV of ESD energy. Leakage current is less than 1 nanoamp. Polymer-based suppressor comes in glass epoxy package and is...

Read More »
ESD Suppressor also has EMI/RFI filtering.

ESD Suppressor also has EMI/RFI filtering.

SPUSB1 provides upstream USB port protection. Device combines ESD protection up to 30 kV, EMI/RFI filtering, and termination into SC70 six lead package. Able to protect upstream circuit elements such as USB controllers, it replaces 10 discrete devices required for same functions. Suppressor provides ESD protection for all data lines as tested under MIL-STD-883D specification. It also offers 15 kV...

Read More »

All Topics