EMI / RFI Filters

EMI / RFI Filters

EMI Filter has 15-100 V range.

Suited for wide range of applications such as automotive, avionics, telecom, and ground systems, Model PFL4000 EMI filter is designed to meet filter requirements of conducted emissions per MIL-STD-461E for 5-100 W dc/dc converters. It features 99.5% efficiency, MTBF of 47.6 million hr, 6-sided shielding, and thermally conductive epoxy packaged in 1 x 2 x .5 in. metal case.

Read More »
EMI / RFI Filters

Common Mode Filter suppresses EMI on DisplayPort interfaces.

Measuring 1.25 x 1.0 x 0.6 mm, TCM1210U-500-2P wide-band thin-film common mode filter suppresses noise on DisplayPort connections for signal transmission between computers or audiovisual equipment and display monitors. DisplayPort link uses up to 4 lines, each rated for 2.7 Gbit/sec, resulting in total transfer rate of 10.8 Gbit/sec. Unit features 8.0 GHz cutoff frequency, 50 W common mode...

Read More »
EMI / RFI Filters

DC Front End Module comes in 2.28 x 2.2 x 0.5 in. package.

Providing EMI filtering and transient protection, M-FIAM9 28 V front-end module meets conducted emission/susceptibility per MIL-STD-461E and input transients per MIL-STD-704A/E/F and MIL-STD-1275A/B/D. With input voltage of 10-36 Vdc and output power up to 500 W, ruggedized unit can be mounted onboard or inboard for height-critical applications. It comes in 2 environmental grades, including -55...

Read More »
Audio IC combines handset audio filtering and ESD protection.
EMI / RFI Filters

Audio IC combines handset audio filtering and ESD protection.

From 2.42 x 1.92 x 0.65 mm flip-chip package, EMIF06-AUD01F2 implements complete EMI filtering and ESD protection for stereo headset output and external/internal microphones. Audible handset demodulation noise is eliminated by achieving -25 dB attenuation throughout stop-band 800-2,480 MHz using high-density 1.3 nF PZT capacitors on microphone lines. ESD protection is achieved via combination...

Read More »
The Economic and Strategic Benefits of Cloud Computing
Sponsored

The Economic and Strategic Benefits of Cloud Computing

Cloud computing and software-as-a-service (SaaS) are two of the hottest IT trends that have emerged in the last couple of decades. By creating the ability to store and access data and programs through the internet while cutting out the middleman (aka, hard drives and other physical devices), cloud computing offers many attractive features to companies in almost all industries, including fiscal savings, speed, scalability, ease of upgrades, and agility. Although the upfront savings of SaaS are undeniable, there are still many that favor on-premise systems and proprietary software. You may be wondering if transitioning to a cloud-based model is the right choice for your company, but with so many different viewpoints it can be hard to make sense of all the pros and cons. Using concrete data organized into helpful graphs, this white paper offers insightful interpretations of the numbers to show the ways in which SaaS can offer both financial savings and strategic advantages.

Read More »
EMI / RFI Filters

Filter Architecture boosts mobile handset signal integrity.

Based on coupled inductor design, Praetorian® III LC filter architecture utilizes 6-pole pi-filter topology and enables design of filters that can fit into small form factor, 0.4 mm pitch uDFN and chip scale packages. Filters, optimized for inductance and capacitance (down to 10 pF), promote attenuation and signal integrity. Products based on this architecture address EMI filter and ESD...

Read More »
EMI / RFI Filters

Electronic RF Filters are designed for shielded enclosures.

Mounted through outer wall of shielded enclosure, Series FCP power line penetration filters are RFI-secure and supplied with threaded nipple. Products are supplied with bleeder resistors to prevent shock hazards and can withstand 140% of rated current for 15 min without any deterioration. Providing specified insertion loss of 100 db min over indicated frequency range, series filters from 60-400...

Read More »
EMI / RFI Filters

EMI/RFI Filters meet MIL-F-15733 specification.

Dual and triple circuit power line electronic filters run at operating temperatures from -550 to +850°C; voltage ratings are 115 Vac, 400 Vdc, O-400 Hz. With minimum insertion loss characteristics, MIL-F-15733/75 filters suit variety of noise and interference filter and safety requirements of electro-magnetic compatibility. Also available is single circuit power line filter IAW to MIL-F-15733.

Read More »
EMI / RFI Filters

Inlet Filters feature earth line choke.

Model FN9233E IEC inlet filter includes earth line choke that helps reduce interference signals on ground wire. They are designed for maximum continuous operating voltage of 250 Vac, 50/60 Hz and frequency range of DC to 400 Hz. Also featuring current rating of 1-15 A at 50°C maximum as well as operating temperature range of -25 to +85°C, devices have MTBF of 1,710,000 hr at 40°C/230 V. Units...

Read More »
EMI / RFI Filters

RFI Filter is intended for three-phase applications.

Suited for frequency converters, industrial and machine tools, lift control systems, and switching cabinet construction, BCF filter is available for current ratings ranging from 7-180 A, and features high symmetric as well as asymmetric damping characteristics over entire frequency range of 100 kHz to 30 MHz. Compact bookform filter comes with light-weight design, and incorporates insulated...

Read More »

All Topics