New EMC Filter Series Designed for Machine Safety
The new FMAC NEO and FMAD NEO 3-phase filter families from SCHURTER meet IEC 60204-1 standards.
Read More »
New ML61 EMI/RFI Filters Used in Military Electronic Systems
Offers voltage rate from 50 Vdc to 200 Vdc. Available with operating temperature of -55°C to +125°C. Ideal for military communication devices, oscillators and low noise amplifiers.
Read More »
New 3-Phase High Performance EMC Filter Features Screw Terminals for Safe Wiring
FMBC EP series is designed for currents from 16 to 230 A at an ambient temperature of 50°C. Metal flange provides an good earth connection when screwed to the chassis. Suitable for industrial applications with leakage currents
Read More »
New Ultra-compact Filters with High-performing Attenuation
Designed for rated currents ranging from 1 A to 36 A at an ambient temperature of 40°C up to 250 V. Wires can be fast-connected or threaded to 6.3 x 0.8 terminals. Suiteable for use in applications confronted with stubborn electro-magnetic interferences such as any equipment with fast semiconductor processing speeds at high switching frequencies.
Read More »
Your Complete Guide to Understanding & Selecting the Right Heat Recovery System
Learn about the important qualities of heat recovery systems.
Read More »
New FQB Series EMC Filters Comes with Flanged or Non-Flanged Baseplates Options
Available with standard production screening (-S suffix) and baseplate temperature rating of -40°C to +115°C, or with enhanced screening (-M suffix) and extended temperature rating of -55°C to +115°C. Operating input voltage ranging from 8.5 (start-up) to 40Vdc and the filters can withstand transients of up to -50 to +210V. Suitable for use in harsh and demanding environments, including...
Read More »
New EMC Filters with Rating of +/- 40VDC at 20A
Designed with high differential and common mode noise attenuation. Available with standard production screening and baseplate temperature rating of -40°C to +115°C. Suitable for harsh and demanding environments, including MIL-COTS vehicle and airborne applications.
Read More »
New FMAB HV Available with Quick Connect Terminals 6.3 x 0.8mm
Ideal for applications requiring AC voltages up to 277 V, such as 1-phase of 3-phase 480/277 VAC wye system. Provides current range from 1 A to 20 A at 277 VAC / 277 VDC according to IEC standard and 277 VAC/400 VDC according to UL/CSA standard. Features temperature range from -40°C to 100°C as well as provides high level of performance in small compact package.
Read More »
New GFP88221 High Amp Filter Panels Provide Short Delivery Lead Time
Available in 600 and 800 amp models and allows configuration of multiple panels side by side on same wall, different wall or back to back walls. Suitable for range of applications including government and commercial installations. Offered in small build that allows easy installation and transportation.
Read More »
SCHURTER Presents FMBB NEO Series EMI Filters with Nickel Plated Steel Housing
The FMBB NEO Series EMI Filters are available in C, D and F designs and can be operated in -40 to 100°C temperature range. The units are rated 1-36 A at 250 VAC and 1-30 A at 125/250 VAC according to IEC and UL/CSA standards respectively. They are suitable for frequency converters, stepper motors, UPS-systems, inverters, and current converters. The filters are offered with quick connect, bolts...
Read More »
New B84243* Series EPCOS EMC Filters Can be Operated in 30 mA RCD Environments
TDK’s B84243* Series EPCOS EMC Filters are optimized for motor cable lengths of either up to 25 m (C1) or 50 m (C2) and are designed for rated voltage of 530 V AC. Units are used in frequency converters for drives of elevators, pumps, conveyor systems and HVAC systems. The filters are offered in IP20 protected metal cases ranging from 190 x 40 x 95 mm to 450 x 170 x 230 mm dimensions. Units...
Read More »
SEALTITE® Fittings and Cord Grips Offer Longer Lasting Protection
Anamet Electrical's 316 Stainless steel SEALTITE® fittings and UL-listed cord grips protect sensitive wiring components from fluids, corrosive contaminations, bumps, and abrasions with a steel core and liquid tight conduit jacket. Check out this video to learn more.
Read More »
