EMI / RFI Filters

Feedthru Filters address automotive EMI concerns.
Electronic Components & Devices

Feedthru Filters address automotive EMI concerns.

Featuring miniature surface mount design, LC T configured FeedThru Filters provide design engineers with consistent broadband EMI filtering for critical drive by wire applications such as throttle and braking. AEC Q200-qualified units typically provide -30 dB of attenuation across 300 MHz frequency spectrum. Response can start as low as 75 MHz or end as high as 1,500 MHz. Current ratings range...

Read More »
IPADT IC combines common-mode filtering and ESD protection.
Electrical Equipment & Systems

IPADT IC combines common-mode filtering and ESD protection.

Model ECMF02 single-channel IC and ECMF04 two data-channel unit combine common-mode filtering, which prevents data errors caused by EMI, and ESD protection needed by high-speed data lines. Measuring 0.55 mm high, Integrated Passive and Active Device (IPADT) products feature 6 GHz differential bandwidth, and common-mode attenuation of -34 dB at 900 MHz and -20 dB between 800 MHz and 2.2 GHz. They...

Read More »
DC Blocks pass frequencies from 300 kHz to 3 GHz.
Electronic Components & Devices

DC Blocks pass frequencies from 300 kHz to 3 GHz.

Suited for use in broadband coupling and test and measurement applications, CBLK DC Blocks are designed to block DC voltage while passing frequencies from 300 kHz to 3 GHz. Units produce flat frequency response and offer low insertion loss of 0.02 dB at 300 KHz and 0.20 db at 3 GHz. DC input voltage is rated at 16 WVdc max and operating temperature range is -55 to +90°C.

Read More »
Low-Dissipation EMI Filters are military and aerospace rated.
Electronic Components & Devices

Low-Dissipation EMI Filters are military and aerospace rated.

Model FGDS-2A-50V is rated from 4-50 W at up to 2 A input current and measures 35.5 x 20.5 x 10.7 mm, while FGDS-10A-50V, rated from 50-150 W at up to 10 A input current, is housed in 40.8 x 27 x 12.7 mm package. Measuring 40.8 x 27 x 16.5 mm, model FGDS-20A-50V is rated from 150-300 W at up to 20 A input. All modules withstand transient and spike requirements of MIL-STD-704A and MIL-STD-1275B,...

Read More »
Injection Molding from 3D Printed Molds
Sponsored

Injection Molding from 3D Printed Molds

3D printing has become one of the biggest trending technological innovations of the 21st century. With its logistical efficiency, ability to easily modify designs, and speed of production, it’s no surprise that the manufacturing industry is turning to 3D printing for a multitude of applications. This white paper explores how 3D printing can be beneficial specifically for manufacturers focused on low volume injection molding of small plastic parts. The report features a succinct yet detailed overview of two case studies, both of which exhibit the advantages and possible challenges of making molds via 3D printing. The article goes on to offer advice on how such challenges can be overcome, as well as some guidelines for mold design. If you’re looking to break the mold to save time and money, download this white paper and see if 3D printing is the right solution for your business.

Read More »
Electronic Components & Devices

EMI Filter provides inductance and series resistance.

Featuring miniature case size of .156 in. OD x .128 in. ID with body length of .200 in. and overall length of .715 in., L Circuit EMI Filter is suited for microwave and RF applications. Hermetically sealed, feed-through solder-in unit provides filtering from 10 kHz to 10 GHz, with 10 pF to 0.033 µF capacitance, 10 A current rating, and voltage ratings from 50-200 Vdc. Monolithic capacitor...

Read More »
Electrical Equipment & Systems

Texas Instruments Delivers Thinnest EMI Filters with Highest ESD Performance

DALLAS - Texas Instruments Incorporated (TI) (NYSE: TXN) today introduced six- and four-channel electromagnetic interference (EMI) filters for LCD display applications, the TPD6F202 and TPD4F202. Electrostatic discharge (ESD) ratings exceed the IEC 61000-4-2 specification by at least three times for contact discharge. Both are 67 percent better than the specification for air-gap discharge. This...

Read More »
Electronic Components & Devices

Weatherproof Low-Pass RF Filter suits CATV applications.

Model CX5060 filter passes cable television (CATV) Docsis 3.0 signals, blocks multimedia-over-coax signals, and provides RFI shielding and surge protection within weatherproof metal housing. Unit's pass band frequency is from 5-1,002 MHz with impedance of 75 W and provides over 40 dB of insertion loss in 1,125-2,300 MHz frequency range. Operating over temperatures of -40 to +85°C, compact...

Read More »
Electronic Components & Devices

Two-Stage EMI Filters suit one-phase systems.

Characterized by high symmetrical and asymmetrical attenuation, FMBB NEO Series includes Design C, which attenuates potentially strong conducted interferences; Design D, which handles high frequency interferences; and Design F for low frequency attenuation. Units are dimensioned as 250 Vac filters with rated current of 1-36 A according to IEC and 125/240 Vac, 1-30 A according to UL/CSA....

Read More »
Miniature L Circuit EMI Filter has hermetic, solder-in design.
Electronic Components & Devices

Miniature L Circuit EMI Filter has hermetic, solder-in design.

Designed to provide inductance and series resistance for optimal transient performance, L circuit EMI filter has .156 in. OD, .128 in. ID, and .200 in. body length. Total overall length is .715 in., and monolithic capacitor construction features glass seal on one end. Feed-through, solder-in filter, suited for microwave and RF applications with space concerns, provides filtering from 10 kHz to...

Read More »

All Topics