Electrical Sensors / Detectors / Transducers

Electrical Sensors / Detectors / Transducers

MicroStrain® Wins its Ninth Best of Sensors Expo Award

Williston, VT - June 26, 2007 - MicroStrain, Inc. today announced that it has been awarded another Gold "Best of Sensors Expo" award in the sensor category. MicroStrain® has now won eight Gold awards and one Silver award in 6 years. This year's award was for an energy harvesting wireless strain node ("ESG-LINK") which was recently used to measure static and dynamic strains in rotating...

Read More »
Electrical Sensors / Detectors / Transducers

Vehicle Sensor offers integrated wireless connectivity.

Suited for multiple vehicle sensing applications, M-GAGE(TM) Wireless Sensor Node comes with integrated FlexPower(TM) battery that supplies power for both sensing and wireless connectivity up to 10 yrs. Sensor features IP67/NEMA 6 housing, internal or external antennas, and 900 MHz and 2.4 GHz systems for global applications. Product also offers connectivity to Modbus RTU RS-485 and RS-232 serial...

Read More »
Electrical Sensors / Detectors / Transducers

Wireless Monitoring Systems suit labs and hospitals.

Available in 2.4 GHz and 900 MHz, Wireless Remote Monitoring Stations can monitor temperature, humidity, CO2, differential pressure, airflow, light level, door ajar condition, and motion. Up to 8 sensors can be connected to each station over plug-and-play SensorBus network. Incoming data is compared against user-assigned alarm limits and generates messages when out of range conditions are...

Read More »
Wireless Pressure Sensor withstands harsh conditions.
Electrical Sensors / Detectors / Transducers

Wireless Pressure Sensor withstands harsh conditions.

Constructed out of 316L Stainless Steel, PressureSensorOne(TM) (PS1) is suited for industrial use where precise pressure measurements are needed without running wires or cables. Dimensions are 30 x 166 cm, and unit is completely self-contained. Featuring IEEE 802.15.4/ZigBee radio modems operating at 2.4 GHz, solution is offered in 8 pressure ranges from 100-10,000 psi. Internal battery powers...

Read More »
Electrical Sensors / Detectors / Transducers

Integrated Circuit suits 12 V hot-swap applications.

Combining Hall-effect current sensing with hot-swap control circuitry, Model ACS760 incorporates external high-side FET gate drive, and produces analog output voltage proportional to applied current. User-controlled soft-start/hot-swap function is accessed via logic enable input pin. Housed in QSOP package, unit is designed for single-supply operation from 10.8-13.2 V. It has 1.5 mW internal...

Read More »
Electrical Sensors / Detectors / Transducers

Millennial Net Announces Wireless Solutions for Enterprise Energy Management

New hardware and software are designed to make a significant impact on energy conservation, energy use management and policy driven by enterprise-wide Energy and Green strategies. BURLINGTON, Mass., June 12 /-- Millennial Net introduces revolutionary wireless energy management solutions at Sensor-2007 EXPO*. The initial release includes several new wireless devices and web-based software in an...

Read More »
New Microwave Moisture Sensor
Electrical Sensors / Detectors / Transducers

New Microwave Moisture Sensor

Scale-Tron has introduced a major upgrade to its RadarTron line of moisture sensors for sand and fine aggregates. The RadarTron model 2450 D has a completely new exterior and interior design incorporating digital electronics. In addition to its analog signal output, it now has a digital RS232 output, compatible with other sensors in its class as well as batching controllers using digital input,...

Read More »
Electrical Sensors / Detectors / Transducers

Gentag, Inc. and the CORE Institute® Sign Agreement to Develop RFID Diagnostic Sensors

WASHINGTON and SUN CITY WEST, Ariz., May 16 / -- Gentag, Inc. and The CORE Institute® are pleased to announce a joint collaborative effort to develop and market RFID Skin Patches for Medical Applications in the area of Orthopedics. The aim of the joint program is to facilitate post surgery monitoring applications by physicians and patients using RFID enabled cell phones under Gentag,...

Read More »
Electrical Sensors / Detectors / Transducers

Balluff Increases Welding Productivity with New Weld Select Products

Florence, KY, June 2007: Balluff has introduced a family of products that significantly increases the life expectancy of sensors and connector components in harsh weld cell environments. The Weld Select family consists of Weld Field Immune sensors, SteelFace(TM) sensors, SlagMaster(TM) slag resistant laminate coatings, improved mounting hardware, connector components, and Weld Repel(TM) products...

Read More »
Electrical Sensors / Detectors / Transducers

Current Transducer operates from single +5 V power supply.

Surface-mounted onto PCB, Model HMS current transducer measures .630 x .531 x .472 in. and integrates primary conductor. It features 2.5 V internal reference voltage and -40 to +85°C operating temperature range. Four standard units are available to cover nominal ac, dc, pulsed, and mixed isolated current measurement of 5, 10, 15, or 20 ARMS, up to 50 kHz, with measuring span of up to...

Read More »
Let Our Safety Experts Lower Your Risk
Sponsored

Let Our Safety Experts Lower Your Risk

Elite Technical Services provides your company with qualified and experienced safety experts. Specializing in confined space and high-angle technical rescue and jobsite hazard assessment, your workplace safety is the top priority. Check out the video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers