Eddy Current System improves inspection speed, efficiency.
Able to be used in multiplexed and simultaneous injection modes, multi-channel Apollo(TM) is designed for industrial facilities requiring eddy current tube inspection of heat exchangers and condensers. Design and digital capabilities suit single-person operations as well as large outages where multiple testers and large data rooms are required. Features include full signal capture,...
Read More »
Current Sensor offers 120 kHz bandwidth.
Featuring 100 -µW integrated current conductor, 50-200 A Model ACS758 provides AC or DC current sensing. Thermally enhanced device consists of linear Hall sensor circuit with copper conduction path. Applied current flowing through conduction path generates magnetic field, which is sensed by integrated Hall IC and converted into proportional voltage. Applications include motor control, load...
Read More »Transducer converts/isolates mV signals from shunt resistors.
Featuring three-way 1.5 kV isolation, MINI Analog Shunt Transducer filters, isolates, and converts mV signal from shunt resistors to standard analog current or voltage signal. Available with 6.2 mm housing and T-Bus power bus capabilities, units can be configured to accept -50 mV to 3 V drops. Hot-swappable signal conditioning slices clip onto powering T-Bus connector without removing bus bars or...
Read More »
Microwave Motion Sensors operate automatic pedestrian doors.
RMS Series sensors actuate sliding, swinging, folding, and revolving pedestrian doors when approaching traffic is detected. RMS-M-NA sensor features single SPST relay output operating in NO or NC, while model RMS-D-RC-NA includes remote control with LCD display for programming and adjustments. RMS-D-NA sensor has turtle-mode capability to detect extremely slow motion. They can be mounted as high...
Read More »
Next-Gen Nanoparticle Arc Shields
This white paper provides an overview into integrating nanoparticles into Paulson face shields.
Read More »Current Transducers meet military/industrial specifications.
With supply voltage of +22 to +32 Vdc, military-grade, bi-directional Series S651 provides output of 0 to -
Read More »
Pepperl+Fuchs to Unveil First Wireless HART Products at 2009 Hanover Fair
TWINSBURG, OH- Pepperl+Fuchs, a leading company directly involved in driving the development of the WirelessHART communication standard, will be unveiling its first WirelessHART enabled products at the 2009 Hanover Fair, April 20-24, 2009. Introductions will include a robust WirelessHART gateway designed for the demanding operating conditions typical of the process industry, a WirelessHART...
Read More »Wireless Sensors relay outdoor environmental conditions.
Featuring 1,400 ft line-of-site transmission range, which can be extended to several miles with optional repeaters, HOBOnode(TM) Series can wirelessly transmit air temperature and soil moisture data to receiver that interfaces with PC via USB cable. Accompanying software displays real-time graphs of environmental conditions and can also provide alarm notifications via text messages/email when...
Read More »
Current Transducers measure current from 6-50 Arms.
Designed for AC and DC isolated current measurement from 6-50 Arms nominal, CAS, CASR and CKSR family of PCB mounted current transducers feature 7-30 ppm/K of thermal offset drift, and have response time less than 0.3 microsec. Products utilize Closed Loop Fluxgate technology, and operate from single 5 V supply. Plastic case of unit has Comparative Tracking Index of 600. CKSR model has one more...
Read More »OVP Device offers automatic USB/charger-detection capability.
Incorporating on-board FET, FAN3989 detects presence of USB charger, eliminating external circuitry, and resulting in 15-20% of board space savings. It also monitors VBUS for over or under-voltage conditions, setting FLAG 2 pin low if VBUS is under 3.3 V or over 6.0 V, while turning off internal PMOS load switch. Suited for cell phone applications, unit comes in compact 8-lead MLP packaging,...
Read More »Wireless Sensor Kit optimizes portability, performance.
TempTrackr(TM) provides users of passive (no power/battery required) and wireless TFSS433D family of surface acoustic wave (SAW) sensors with mobility, portability, and performance required for real-time, in-process temperature sensing applications. Along with 4 passive wireless temperature sensors capable of reading temperatures from 0 to 120-
Read More »
Reduce Time to Market, Improve System Uptime with Dedicated Computing Medical Solutions
Embedded computing solutions from Dedicated Computing are designed to meet unique and specific requirements. As the preferred supplier to leading healthcare OEMs, the Dedicated Computing team of expert engineers gets your product out to the market faster while helping your company avoid costly validation and verification steps. Check out our video to learn more.
Read More »
