Electrical Sensors / Detectors / Transducers

Electrical Sensors / Detectors / Transducers

Transducers provide DC current monitoring.

Available for differential and ground fault current monitoring, space flight Series S 767 and military grade Series 913 B provide isolated analog output directly proportional to input magnetically. Featuring Â-½ in. aperture, Series S 767 operates on 22-36 Vdc power with response time of 50 ms. Series 913 B, designed with ¾ in. aperture, operates from 24-32 Vdc power with response...

Read More »
Electrical Sensors / Detectors / Transducers

Wireless Sensor Network Platform integrates LabVIEW.

NI wireless sensor network (WSN) platform includes LabVIEW Wireless Sensor Network Module Pioneer for graphical programming. Its NI WSN measurement nodes, powered by 4 AA batteries for up to 3 yr, consist of NI WSN-3202 4-channel, ±10 V analog input node and NI WSN-3212 4-channel, 24-bit thermocouple node. Both offer 4 digital I/O channels that configure for input, sinking output, or...

Read More »
Mini Shock/Vibration Logger takes 1,000 measurements/sec.
Electrical Sensors / Detectors / Transducers

Mini Shock/Vibration Logger takes 1,000 measurements/sec.

Model MSR165 triaxial digital accelerometer mini datalogger allows for simultaneous temperature, humidity, pressure, light, and analog input voltage recording. It can store over 2 million measurement parameters and continuously record for 32 msec before main shock event. At 39 x 23 x 72 mm and 69 g, it operates on 150 mA at 13-bit resolution, and has rechargeable 900 mAh lithium-polymer battery....

Read More »
Magnetic Position Sensor comes in subminiature SMT package.
Electrical Sensors / Detectors / Transducers

Magnetic Position Sensor comes in subminiature SMT package.

Bipolar Hall-effect magnetic position sensor SS30AT has 4.5-24 Vdc supply voltages and ability to operate at up to 125°C. It features built-in reverse voltage protection and thermally balanced integrated circuit that provides stable operation over full temperature range. Available on tape and reel, device allows for automated pick-and-place assembly, and suits transportation and industrial...

Read More »
SMT Force Sensor allows for automated assembly on PCB.
Electrical Sensors / Detectors / Transducers

SMT Force Sensor allows for automated assembly on PCB.

Providing 20 million Mean Cycle To Failure (MCTF) at 25°C, low profile FSS-SMT Series utilizes low power consuming, unamplified, uncompensated Wheatstone bridge circuit design that provides inherently stable millivolt output over force range. Sensor offers low deflection of 30 microns typical at full scale. Applications include occlusion detection, load and compression sensing, and variable...

Read More »
Electrical Sensors / Detectors / Transducers

AC Current Detectors come in clamp-on and pass-thru models.

Designed to compare AC input to fixed or adjustable current threshold, Series 870 and ACS-3 provide isolated switch or relay output that is activated as required. Housed in metal case and operating from -20 to +71°C, Series 870 features SPDT relay output with 10 A contacts, frequency from 47-63 Hz, and Â-¾ in. dia aperture. Series ACS-3, operating from -50 to +65°C, is housed in...

Read More »
MicroStrain® Wins Silver and Gold at Sensors Expo
Electrical Sensors / Detectors / Transducers

MicroStrain® Wins Silver and Gold at Sensors Expo

Williston, VT - June 15, 2009 MicroStrain won two more Best of Sensors Expo" awards at Sensors Expo in Rosemont, IL. These Gold and Silver awards bring MicroStrain's total to ten Gold awards and two Silver awards, accumulated over the last eight years. This year's gold award was for HS-Link(TM) three channel High Speed Wireless Node with sample rates up to 100 kHz on all three channels. During...

Read More »
Emerson Process Management SMART Functionality in Analyzers and Sensors
Electrical Sensors / Detectors / Transducers

Emerson Process Management SMART Functionality in Analyzers and Sensors

Emerson Process Management PERpH-X pH sensors, Model 6081 wireless analyzer, Model 1056 dual-input analyzer, and Model 1057 multi-parameter analyzer feature SMART functionality. These are the first in a new generation of Rosemount Analytical sensors and analyzers that will be shipped with SMART capability embedded calibration that is uploaded to the analyzer from the sensor at start-up,...

Read More »
Electrical Sensors / Detectors / Transducers

CO2/Temperature WiFi Sensor helps conserve energy in buildings.

Designed to utilize existing IEEE 802.11 voice/data networks, wall-mounted TR9294-WF can be used to regulate outside air ventilation based on actual number of people in particular space. Signal can be directed over local network to building control system and/or over Internet to any remote monitoring/data collection location. Self-calibrating and maintenance-free sensor uses 24 Vac low-voltage...

Read More »
Customer-Specific Eddy Current Sensors for OEMs
Electrical Sensors / Detectors / Transducers

Customer-Specific Eddy Current Sensors for OEMs

Micro-Epsilon provides extremely flexible solutions in the area of eddy current sensors for OEM applications. This flexibility ranges from cost-optimised sensor systems with highly integrated electronics through to innovative sensors with silver/palladium coils embedded in glass/ceramic. In this way, these sensors achieve high levels of temperature stability and service life that were previously...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers