Electrical Enclosures

Grimanesa AmorÃ-³s Studio Chooses EIC Solutions Air Conditioned Enclosures for Art Installation
Electrical Enclosures

Grimanesa AmorÃ-³s Studio Chooses EIC Solutions Air Conditioned Enclosures for Art Installation

Grimanesa AmorÃ-³s was born in Lima, Peru and lives and works in New York City. She is an interdisciplinary artist with diverse interests in the fields of social history, scientific research and critical theory, which have greatly influenced her work. Her art incorporates elements from sculpture, video, lighting, and technology to create site-specific installations to engage architecture and...

Read More »
Electronics Enclosures are designed for indoor applications.
Electrical Enclosures

Electronics Enclosures are designed for indoor applications.

Unsealed (IP41) DATEC-COMPACT handheld enclosuresÂ- enable effecting housing of electronics for OEM designers. Ergonomic units – enclosures, desk stations, and wall holders – can be specified with built-in contacts for charging three 1.5 V AAA or AA cells, and IP65 version withÂ- battery compartment enables SD cards and USB connectors to be housed within sealed area. Construction is...

Read More »
Conduction-Cooled ATR Chassis meet military standards.
Electrical Enclosures

Conduction-Cooled ATR Chassis meet military standards.

Available in ATR format or in specialty Small Form Factor designs, Conduction-Cooled Chassis support both OpenVPX and MicroTCA architectures. Units come in standard Â-½ and Â-¾ sizes for 3U or 6U boards. There are also options for MicroTCA.3 Hardened form factor as well as heat exchanged versions.Â- Enclosures are designed to meet MIL-STD-704, MIL-STD-810G, and MIL-STD-461. For...

Read More »
ATR Format Enclosures have conduction-cooled design.
Electrical Enclosures

ATR Format Enclosures have conduction-cooled design.

Available for both OpenVPX and MicroTCA architectures, conduction-cooledÂ- ATR format chassis comes in Â-½ andÂ- Ã‚-¾ sizes for 3U or 6U boards. Options are also available for MicroTCA.3 Hardened form factor as well as heat exchanged versions. Designed to meet MIL-STD-704, MIL-STD-810G, and MIL-STD-461, products are also available with power interface boards forÂ- incorporating...

Read More »
Power Distribution Boxes eliminate voltage drop in field.
Electrical Enclosures

Power Distribution Boxes eliminate voltage drop in field.

Designed for field-based power supply voltages of 24 V, M12 Power Distribution Boxes, in combination with standard M12 power cables of 4x10 AWG conductors, can eliminate voltage drop that occurs across long cable runs. Distributor has four T-coded M12 receptacles with current load up to 10 A/channel. Each of 8 channels is equipped with plug-in fuse, and LEDs indicate status of input and output...

Read More »
Enclosure Kits allow flexible transmitter mounting.
Electrical Enclosures

Enclosure Kits allow flexible transmitter mounting.

Offered in kits with hinged or flat cover, Signet 9900 Transmitter Rear Enclosures enable flexible mounting of Signet 9900-1P Transmitter onto pipes, walls, tanks, struts, at angles, or inside panels. Holes for wiring in any orientationÂ- can be drilled on any enclosure side for further flexibility, and room is provided to accommodate all accessory modules: 4–20 mA output, batch, relay,...

Read More »
Die-Cast Aluminum Boxes feature IP68 rating.
Electrical Enclosures

Die-Cast Aluminum Boxes feature IP68 rating.

Combining corrosion-resistant die-cast aluminum construction with continuous silicon gasket, AN-A Series can house sensitive equipment in hazardous, dusty, and washdown factory environments, as well as in wet outdoor locations. Enclosures are available in 24 sizes ranging from 3.54 x 1.42 x 1.18 in. to 10.24 x 6.30 x 3.56 in., suited for machine controls, security, lighting, instrument cases,...

Read More »
Tough Type 1 Metal Cabinets
Electrical Enclosures

Tough Type 1 Metal Cabinets

STI’s Metal Protective Cabinets protect equipment from hazardous parts and provide a degree of protection to enclosed equipment against ingress of falling dirt. Ideal for junction and power supply boxes, the heavy-duty cans are constructed with a powder coated metal to help protect against corrosion. They have a continuous piano type hinge and seven Â-½, Â-¾ inch conduit knockouts....

Read More »
Electronics Enclosures support wall mounting with adapter.
Electrical Enclosures

Electronics Enclosures support wall mounting with adapter.

Designed for portable instrumentation applications, CARRYTEC large and handheld instrument enclosures support wall mounting, for charging and data transfer, via available adapter. This option adds to existing mounting methods (desktop, tripod, rail, suspension arm) and is molded in off white (RAL 9002) ABS (UL 94 HB) for indoor applications or UV-stable lava ASA+PC-FR (UL 94 V-0) for outdoor use....

Read More »
Electrical Enclosures

Cabinet System protects equipment during severe earthquakes.

Engineered to protect and store network equipment in seismically active areas, Z4-Series SeismicFrameÂ-® Cabinet SystemÂ- features 1,500 lb seismic equipment load with additional 100 lb top load for cabling per GR-63-CORE testing. Unit comes in multiple size options, including 600 and 800 mm, as well asÂ- 1,200 mm deep model with narrow width. Features include factory-installed...

Read More »
Delivery Equipment That Really Delivers
Sponsored

Delivery Equipment That Really Delivers

Are you in need of safer, more efficient transportation equipment? Do you feel like your delivery equipment could really use an upgrade? Check out this video, and learn about Halo Ramp Company's patented safety platforms, and how they help you bypass your trickiest delivery challenges.

Read More »

All Topics