High Attenuation Portable Tent for Test Labs
High Attenuation RF / EMI Tent Test Enclosure Certified in Independent Testing. Canandaigua, NY USA:Ã- High RF / EMI attenuation for a Select-A-Shield™ test enclosure has been certified in recent testing.Ã- Results included -98.9 dB average shielding effectiveness (SE) at commonly used cellular and Wi-Fi frequencies. The IEEEÃ-® 299 -2006 test was conducted by an independent test...
Read More »Plastic Utility Enclosure measures 1.00 x 2 x 3.500 in.
Molded using ABS plastic, with UL 94VO is available upon request, SATURN Series model 100X235 comes in Black, Ivory, and Dark Grey as standard and featuresÃ- molded top and bottom screwed together withÃ- 4 PlastiteÃ-® screws. Plastic case has lightly textured finish, andÃ- additional options offered include EMI/RFI shielding; cut-outs, openings, chamfers, and other assembly...
Read More »Sealed Wall Mount Enclosures suit harsh environments.
Suitable for housing electrical equipment and electronic systems, HWSSHK 304 and 316L stainless steel wallmount enclosures are sealed to NEMA 4X (IP66) and come in 30 sizes from 24 x 20 x 6 in. to 60 x 36 x 16 in. Corrosion resistance does not degrade after scratching or other surface damage, and 3-point, heavy-duty, padlockable handle mechanism increases sealing efficacy while minimizing effort...
Read More »Utility Enclosure features tight fit and compact dimensions.
SATURN Series 075X22, measuring .735 x 2 x 2 in., featuresÃ- molded top and bottom that fit together snugly toÃ- eliminate need for screws. If needed,Ã- 2 halves can be glued or ultrasonically welded together for permanent closure. Halves can also be separated and used as potting boxes by pouring encapsulating liquid over installed electronics to accommodate requirements of wet...
Read More »
System Selection: Smart Hardware Choices Enable a Cascade of Value
This white paper outlines six questions to help OEMs and ISVs select the right hardware design to best support their purpose-driven application and product.
Read More »Non-Metallic Enclosures include 3 sizes in 2 configurations.
Featuring chemically resistant fiberglass reinforced composite formulation, J Series includes 20 x 20, 24 x 20, and 24 x 24 sizes available in hinged lockable pull latch (HPL) and 3-point latch (3PT) configurations. Each features ETL certification to NEMA Type 1/3/3R/4/4X/12/13 as well as IP66 per IEC60529. Single point entry with integrated 3-point rotating handle is afforded by 3PT option....
Read More »What's the Best Technique for Temperature Management of Sensitive Components in Extreme Environments?
The first consideration should be the type of enclosure used to house the components. The minimum rating should be NEMA 3, though NEMA 4X is often considered for greater protection. While enclosures provide immediate physical protection for electronics, unless insulated, they provide very little in regards to extreme temperatures. Therefore, thermal management systems are recommended and must be...
Read More »
RF Shielding Tent attains -98.9 dB in 800-2,400 MHz band.
Featuring collapsible, portable design, Select-A-Shield™ Tent includes RF shielded vestibule, which allows entry/exit without compromising shielding integrity. Other components include double-seal door system, ventilation, built-in connector panel with filtered power connections, lighting, and shielded floor. Tent uses Nova Select™ fabric consisting of electroless plated silver etched...
Read More »Electrical Enclosures have hinged and waterproof design.
Available inÃ- 8 sizes from 6 x 4 in.Ã- through 16 x 14 in. to protect components in difficult environments,Ã- YH Series is molded from impact-resistant polycarbonate and meets NEMA Type 1/2/3/3R/4/4X/5/6/6P/12/13 specificationsÃ- as well asÃ- IP68 of IEC 60529 requirements. Stainless steel hardware, robust hinges, and gasket are standard, and opaque or clear cover can be...
Read More »Tripp Lite Finalises Its Infrastructure Demonstrations for Data Centre WorldPower Management and IT
Visit Tripp Lite at the event stand J65 on February 27th and 28th CHICAGO, Feb. 12, 2013Ã- - Tripp Lite, a world-leading manufacturer of power protection, connectivity, and Data Centre infrastructure products, is proud to announce that they will participate for the first time in Data Centre World, which will be held on February 27th and 28th 2013 at ExCeL in London. Ã- Darwin Haines,...
Read More »
T-Shape Enclosures protect handheld electronic devices.
Measuring 8.19 x 4.60 x 1.18 in., TEKNET-T enclosures feature T-shaped head section for mounting larger LCD modules and narrower keypad area. Top section is recessed to facilitate mounting of membrane keypad and may also include integrated window for display module. Soft-touch edge grips promote secure and comfortable holding as well as device protection. Enclosures are manufactured using dual...
Read More »
TPA Motion Introduces New Curved Linear Rail Guides: the CR40 Series
For the ultimate in precision open and closed loop guided motion systems, TPA Motion is the leader in curved rail, liner guides. We specialize in engineering excellence, with products that exhibit an elevated level of precision, delivering robust performance, even under the most challenging conditions. See our video to learn more.
Read More »
